Which large-format printer is right for you?

Teams working with A0 diagrams

If you need to read or discuss drawings on a single, unbroken sheet, check the usable media width first. DIN specifies A0 dimensions of 841 × 1189 mm.

Teams sharing a printer

If several people send jobs to the same printer, look for suitable network interfaces, a practical way to change paper and a good system for handling printed documents. The German Federal Office for Information Security also considers the secure operation of printers within IT networks.

A1 teams short on space

If you don’t need A0, you could consider a more compact paper path. As well as allowing for the printer itself, leave room for rolls, operation and printed sheets.

What should your studio check before buying?

Buying consideration What to look for Who should pay particular attention?
Format and paper path Check the largest unbroken diagram you need to print, print margins, and the maximum width and permitted sheet format for roll and single-sheet feeds. DIN specifies A0 as 841 × 1189 mm. If I need to print A0 without splitting it, media width is crucial. Around 36% of consumers put their required output format first.
Team workflow Check that the interfaces and drivers work with the studio’s computers, and plan for paper changes, printer placement and access to printouts. The BSI covers the secure operation of printers within IT networks. If several people print and reload paper, I need a process that works for everyone day to day. Around 29% of consumers prioritise a shared workflow.
Ink and maintenance Check which ink, paper and, where applicable, maintenance parts are compatible with the exact model. Only compare cost per print using the same image, media and print mode. If we regularly print diagrams in the studio, I want to budget for ongoing costs as well as the printer itself. Around 21% of consumers put running costs first.
Space and output Consider the printer’s dimensions and ensure there is clear access to the roll, controls and output area at the intended location. The manufacturer’s listed dimensions don’t necessarily include the entire working area. If the printer and paper path need to fit into a shared space, the room they take up during use matters. Around 14% of consumers prioritise the available space.

Common buying misconceptions

  • “24 inches” means you can print unbroken A0

    A0 is 841 mm wide on its shorter side. A maximum media width of around 610 mm isn’t enough; roll and single-sheet feeds may also support different formats.

    Check the largest finished format and the paper path intended for it on the specific model.

    Choosing the wrong format could mean unplanned paper purchases or having to print your work again.

  • Measuring only the printer’s footprint

    The stated dimensions don’t necessarily account for the space needed to operate the printer, change paper or collect printed sheets.

    Plan the location with the paper path open and enough clear space for printing and operation.

    Rolls and finished prints also need room in a shared printing area.

  • Using the printer’s purchase price to estimate the cost per diagram

    There are no comparable usage measurements available for the models considered here. Ink, paper and maintenance needs depend on factors such as the original and print mode.

    Compare costs using the same original, media and print mode, and check which consumables are compatible with the exact model.

    As well as ink, factor paper and any maintenance parts into your ongoing budget.

  • Assuming every HP DesignJet T850 includes scanning and copying

    HP offers the T850 as a printer, as well as a separate multifunction version with scanning and copying.

    Before ordering, check the full model name and the scan format you need.

    Otherwise, if you later need to digitise paper originals, you may need an additional scanning solution.

Key brands at a glance

Canon

The imagePROGRAF TC-21 is a 24-inch option, while the TM-340 is designed for wider diagrams.

  • Canon lists four pigment colours, Ethernet and Wi-Fi for the TC-21.
  • Canon gives the TM-340 a print width of 91.4 cm.
  • The TC-21’s maximum width isn’t enough for unbroken A0. The manufacturer’s information doesn’t provide evidence of a cost advantage.

HP

The DesignJet T250 is intended for A1 formats. For A0, the T850 is available as separate printer and multifunction versions.

  • HP lists Gigabit Ethernet, Wi-Fi and an automatic horizontal cutter for the T250.
  • The DesignJet T850 multifunction version is available with printing, copying and scanning.
  • The T250 doesn’t support A0 width. For the T250 and T850 offers considered here, HP notes restrictions on cartridges without a suitable HP chip.

Epson

According to Epson, the SureColor SC-T2100 supports rolls up to 24 inches, while the SC-T5100 is designed for wider prints.

  • Epson lists the SC-T5100’s print width as up to 91.4 cm, or A0+.
  • Epson lists pigment ink and automatic nozzle checking as features of the model ranges mentioned.
  • According to Epson, the SC-T2100’s automatic sheet feeder supports up to A3, although its roll feed can handle wider paper. Any reduction in misprints is a manufacturer claim, not the result of a comparative test.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I simply print A1 diagrams using the single-sheet feeder on a 24-inch printer?

Not necessarily. Epson lists support for rolls up to 24 inches on the SC-T2100, but the automatic single-sheet feeder only supports sheets up to A3. Before buying A1 sheets, check the paper path on the exact model.

How do you set up a printer for several people in a studio?

First, check that the available interfaces and drivers are compatible with your existing network and computers. If your diagrams are confidential, you should also consider the printer’s location and access permissions. The German Federal Office for Information Security describes the secure operation of printers within IT networks as an organisational and technical matter, not a blanket guarantee of a particular model’s features.

What maintenance and ongoing costs should I check before buying?

Check which ink, paper and, where applicable, maintenance parts are compatible with the exact model. Canon provides a support page for the TC-21 with drivers, manuals and firmware. You can’t reliably work out the cost per diagram from the printer’s price or ink tank capacity alone.

What should a studio in Germany know about product labelling and disposal?

As part of its market surveillance, the Federal Network Agency lists CE marking, product traceability and correct manufacturer information among the checks it carries out. This isn’t confirmation of any specific device mentioned here. The German Environment Agency points out that waste electrical and electronic equipment must be collected separately. If your studio printer is used exclusively for business purposes, check the appropriate take-back arrangements with the manufacturer or waste contractor in advance.