Which option is right for you?

Students with A1 plans

If your diagrams need to be printed at their full size, compare a suitable plotter with a print service you can actually access. HP Germany lists the DesignJet T250 as supporting A1, while TU Dortmund restricts its printing service to specific user groups and projects.

Students short on space

If your diagrams fit on A3, remember to allow space for both the printer and its paper feed and output trays. Canon Germany gives the dimensions of the PIXMA TS9550a with its trays retracted.

Students who make frequent colour corrections

If you print lots of revised versions, compare cartridges with refillable ink tanks, taking both the purchase price and the cost of supplies into account. Canon Germany lists separate cartridges for the PIXMA TS9550a, while Epson Germany describes the ET-15000 as using an ink tank system.

What should you consider when choosing?

Start by deciding on the largest finished format you need. Then compare the paper feed, how often you’ll print and the cost of supplies. If you only need large prints occasionally, also check whether there’s a print service you can access.

Buying criterion What to look for Who should pay particular attention?
Finished format required Check your file’s format against the print formats explicitly supported. Canon Germany lists A3 for the PIXMA TS9550a, while HP Germany lists A1 for the DesignJet T250. If your plan needs to be printed at A1, the finished format is the deciding factor. Around 33% of consumers put their required print format first.
Space and paper feed Measure the space where you’ll put the printer and check the feed and output with the trays open. Canon Germany’s dimensions for the TS9550a are with the trays retracted; Epson Germany describes the ET-15000 as having a rear feed for A3+. If you’re printing in a small flat, you’ll need to allow space for the paper as well as the printer itself. Around 27% of consumers prioritise the printer’s footprint and paper handling.
Ongoing running costs Compare the purchase price and the cost of supplies separately, based on how many versions you expect to print and the paper format you’ll use. If you often revise the colours in your diagrams, the ongoing cost of repeat prints matters. Around 20% of consumers put these costs first.
Print service instead of your own printer Check who can use the service, which formats it accepts and its submission deadlines. TU Dortmund’s printing service is explicitly restricted to study-related projects for specific user groups. If you only need large plots occasionally, check whether a suitable service is within reach. Around 20% of consumers prioritise this alternative to owning a printer.

Common buying mistakes

  • Assuming ‘A3 printing’ also means ‘A3 scanning’

    Some A3 and A3+ all-in-one printers are limited to A4 for scanning and copying. Brother Germany specifies this limitation for the MFC-J5340DW; Epson Germany also describes it for the ET-15000.

    Check the print, scan and copy formats separately if you want to digitise large paper originals.

    You may also need a scanning service or another device for large originals.

  • Measuring only with the trays closed

    A printer’s external dimensions don’t show how much space the paper feed and output need when it’s in use. Canon Germany’s dimensions for the PIXMA TS9550a are given with the trays retracted.

    Allow space where you plan to put it for the paper feed and output, as well as access to supplies.

  • Taking manufacturers’ page yields as the cost per diagram

    An advertised page yield isn’t a measure for every diagram format or level of ink coverage. Your actual needs also depend on how many versions you print.

    Calculate costs based on the format and print volume you expect, and compare the purchase price and supplies separately.

    A different format or higher ink and paper use could mean you need more supplies and replacements than you’d planned for.

  • Assuming any replacement cartridge will work

    HP says the DesignJet T250 uses dynamic security measures that may block cartridges without a suitable HP chip.

    Before buying, check the cartridge compatibility listed for the exact model.

Key printer brands at a glance

Canon

The PIXMA TS9550a range includes an A3-capable all-in-one printer for occasional diagrams and everyday documents.

  • Canon lists five separate cartridges and A3 borderless printing for the TS9550a.
  • According to Canon, automatic duplex printing is limited to certain smaller plain paper formats, rather than being available across the board for A3. The printer’s dimensions are given with the trays retracted.

Epson

The ET-15000 and ET-8550 represent two different types of A3+ ink tank printer: an all-in-one model and a photo printer.

  • Epson describes the ET-15000 as offering A3+ printing and A4 scanning; the ET-8550 has A3+ photo paper feeds, according to Epson.
  • Scanning and copying on the ET-15000 are limited to A4. Epson’s figures for page yield and cost savings are manufacturer claims based on the conditions stated, not savings measured for student diagrams.

Brother

The MFC-J5340DW is a document-focused all-in-one printer for a mix of study materials.

  • Brother lists Wi-Fi, LAN and A3 printing for this model.
  • According to Brother, scanning and copying are limited to A4, which is a drawback if you need to digitise large originals.

HP

The DesignJet T250 represents the 24-inch plotter class for diagrams up to A1.

  • HP lists both sheet and roll feeds for the DesignJet T250.
  • HP says this model uses dynamic security measures that may block cartridges without a suitable HP chip. Check that your supplies are compatible before buying.

Joybuy products

Suitable products coming soon.

Frequently asked questions

Is A3 big enough for my plan?

A3 is big enough if your file needs to be printed at its required finished size on A3 paper. For a full-size A1 plan, you’ll need a printer or print service that explicitly supports that format; HP lists the DesignJet T250 as supporting A1.

Can an A3 all-in-one printer also scan A3 originals?

Not necessarily. Brother Germany lists A3 printing but A4 scanning and copying for the MFC-J5340DW. Epson Germany also distinguishes between A3+ printing and A4 scanning and copying on the ET-15000.

What should I do first if print quality starts to drop?

For affected Epson printers, Epson recommends running a nozzle check first and cleaning the print head only if needed. Cleaning uses ink, so follow the instructions for your specific model.

What should I check about replacement cartridges and my rights after buying?

Check cartridge compatibility for the exact model: HP says the DesignJet T250 may have restrictions due to dynamic security measures. Separately, Germany’s Verbraucherzentrale explains that statutory rights against the seller generally apply for two years after you receive a product; these are different from a manufacturer’s guarantee.

How should printers be disposed of in Germany?

Old printers shouldn’t go in household waste. Take them to a separate collection point or a suitable take-back location instead. Germany’s Federal Environment Agency provides information on how to dispose of electrical equipment correctly.