If you only need a few final plans, compare the total cost of owning a printer with a specific quote from a print service. For repeated design revisions, an A3 printer of your own may be more convenient. Check that A3 is a supported print size and, if you want to digitise paper plans, that the printer can also scan in A3. For prints where scale matters, turn off automatic page sizing and check a known measurement on the printout.
Which printing needs matter to you?
Submitting plans to scale
If you need to submit floor plans or elevations to scale on an A3 sheet, check the file format and print area, then print a known measurement as a test. Autodesk Support recommends selecting “Actual size” or “None” rather than automatic scaling when printing a PDF.
Multiple rounds of revisions
If you’ll be making repeated revisions, consider the cost of the printer, ink and paper together. Don’t assume a stated page yield will apply to your A3 plans. For example, Canon Germany gives yields for specific A4 documents and 10 × 15 cm photos for the PIXMA iX6850.
Plans with handwritten corrections
If you want to digitise paper plans after marking them up, the scan size matters just as much as the print size. Brother Germany lists printing, scanning and copying up to A3 for the MFC-J6940DW, while the MFC-J5740DW scans and copies only up to A4.
What should you look for when buying?
First, check whether the printer can produce your plans to scale on an A3 sheet. Then compare project costs and decide whether you also need to scan A3 originals.
| Consideration |
What to check before buying |
Who is it most relevant to? |
| Scale and print area |
Check that A3 is a supported print size, confirm the margins you need and print the PDF without automatic scaling. Measure a known distance on a test print. |
If I need to submit a plan to scale on an A3 sheet, I want to check the scaling before handing it in. Around 33% of consumers prioritise printing to scale. |
| Buying a printer for a single project |
Compare the number of A3 sheets you expect to print with a specific quote from a print service, as well as the cost of the printer, paper and initial supplies. |
If I only need a few plans, I want to know whether buying a printer makes sense for this project. Around 27% of consumers are particularly mindful of buying a printer for a one-off project. |
| Ink and paper for drafts |
Factor in compatible ink, A3 paper, and the number and coverage of the prints you plan to make. Don’t use yields for other sizes to estimate the cost of A3 printing. |
If I have several rounds of revisions coming up, I want to estimate the cost of supplies for the plans I’ll actually print. Around 20% of consumers prioritise the cost of repeated A3 drafts. |
| Image-heavy presentation sheets |
Check the paper types, finished size and border options supported by the model. Also test technical drawings to make sure they print to scale. |
If my presentation includes image-heavy sheets as well as line drawings, I want to choose the right paper and print size. Around 13% of consumers prioritise this type of presentation image. |
| Scanning A3 plans again |
Check the maximum scan and copy sizes separately from the print size. If you’re using paper originals, also check the available feed method. |
If I want to digitise A3 originals with handwritten corrections, I need a suitable scanning function. Around 7% of consumers are particularly concerned with scanning paper A3 plans again. |
Common printing and buying mistakes
-
Assuming A3 printing means A3 scanning
A multifunction printer may print in A3 but still be limited to A4 when scanning. Brother lists scanning and copying up to A4 for the MFC-J5740DW.
If you want to digitise paper plans, check the print, scan and copy sizes separately for the specific model.
-
Leaving “Fit to page” switched on when printing a PDF
Automatic page sizing can change the scale of a plan. Autodesk Support recommends selecting “Actual size” or “None” when printing a PDF.
Check a known measurement on the printout before submitting the plan.
-
Using yields for other sizes to estimate the cost of A3 plans
The cartridge yields published by Canon for the PIXMA iX6850 are based on specified A4 document tests or 10 × 15 cm photo tests, not A3 floor plans.
For your estimate, factor in the number of sheets you plan to print, the design of your plans, ink and A3 paper.
-
Choosing cartridges by their shape alone
HP says the OfficeJet Pro 9730 has dynamic security measures that may block cartridges with a non-HP chip.
Before buying a printer or replacement cartridges, check the compatibility information for the specific model.
A guide to relevant printer brands
Brother
The MFC models mentioned combine A3 printing with different scan and copy sizes.
- Brother Germany lists printing, scanning and copying up to A3 for the MFC-J6940DW.
- According to Brother Germany, scanning and copying on the MFC-J5740DW are limited to A4.
Canon
The PIXMA iX6850 is an A3+ inkjet option for printing, with no stated scanning or copying function.
- Canon Germany lists borderless printing up to A3+ and manually selectable duplex printing.
- Published cartridge yields are based on specified A4 document or photo tests, not A3 plans.
Epson
The models mentioned cater for different needs: A3+ photo printing with cartridges or ink tanks, and A3 document printing with a scanning option.
- Epson Germany lists photo printing up to A3+ for the XP-15000 and a refillable ink tank system for the ET-8550.
- Photo specifications or claims about printing costs alone don’t confirm that a school plan will print to scale or show the specific cost of printing it.
HP
The OfficeJet Pro 9730 is another A3 printing and scanning option for plans and other documents.
- HP Germany lists A3 printing and A3 scanning for this model.
- HP warns that dynamic security measures may affect cartridges without a suitable HP chip. Check compatibility before buying.
Joybuy products
Related products will be available soon.
Frequently asked questions
How do I print a plan to scale?
Choose the right sheet size and intended plotting scale in your drawing software. When printing a PDF, Autodesk Support recommends selecting “Actual size” or “None” rather than “Fit”. Then measure a known distance on the paper to check the printout.
Can every A3 multifunction printer scan A3 plans too?
No. Print and scan sizes can differ. Brother lists A3 printing but only A4 scanning and copying for the MFC-J5740DW; these functions are listed up to A3 for the MFC-J6940DW. Check the sizes separately for the specific model.
Can I work out the cost of printing an A3 floor plan from the cartridge yield?
Not from the yield alone. Canon’s test conditions for the PIXMA iX6850 cover A4 colour documents and borderless 10 × 15 cm photos. For your estimate, also factor in the actual ink and paper needed for your plans, along with the prices of compatible supplies.
Can you put an old printer in household waste in Germany?
No. The German Environment Agency explains that waste electrical and electronic equipment must be collected separately from unsorted household waste. You can take it to a local recycling centre free of charge, among other options. Returns to retailers are subject to their respective conditions.