For mood boards in your hobby room, your printer should support at least A3 printing. Then choose a paper feed and borderless print size to suit your images. If you print new designs frequently, a refillable photo printer may be worth considering, while a cartridge model could suit occasional mood boards. If you want to digitise paper originals, check the scan size separately from the print size.
Who uses A3 printers for mood boards?
For creating image-rich A3 boards
If you want to assess photos, colours and cut-outs together on a single A3 sheet, the print size, paper and, where needed, borderless printing all matter. Canon Germany states that the iX6850 supports borderless printing up to A3 and A3+.
For creating multiple design drafts
If you regularly print new versions, estimate ink and paper use based on your own images and print volumes. Epson Germany gives the ET-18100’s photo yield for 10 × 15 cm prints; this figure cannot be applied directly to full-page A3 mood boards.
For digitising paper originals
If you want to digitise drawings or collages, check the scan size you need as well as the print size. Brother states that the MFC-J6940DW can print, scan and copy up to A3, while the Epson XP-980 scans and copies up to A4.
What should you look for when buying?
First, check that the print size is large enough for your mood boards and that the printer can feed the paper you want to use. Then consider whether frequent print runs or scanning large originals call for additional features.
| What matters |
What to check before buying |
Who is this important to? |
| A3 finished size and printable area |
Check A3 printing, the supported borderless size and the suitable paper feed separately. |
If I need a single A3 mood board, the printable area I can actually use matters. Around 36% of consumers prioritise the finished size. |
| How images look on paper |
Match the paper type and feed to the specific model, and check that it supports your chosen media. |
If I want to use thicker paper or card, I check that the media is compatible with the feed. Around 29% of consumers prioritise paper and image quality. |
| Ink and paper for design drafts |
Base your estimate on the planned number of A3 sheets and image coverage; compare printer, ink and paper costs on the same basis. |
If I print several versions, I want to estimate the materials needed for my images rather than apply a small test photo yield to A3. Around 21% of consumers place the greatest importance on ongoing costs. |
| Digitising originals |
Check print, scan and copy sizes separately, and confirm whether A3 originals can be scanned in one piece. |
If I want to digitise existing A3 drawings, I need a suitable scan size, not just A3 printing. Around 14% of consumers prioritise scanning large originals. |
Buying and usage pitfalls
-
Assuming A3 printing means A3 scanning
A printer may print up to A3 but only scan smaller originals. Epson lists scan and copy sizes up to A4 for the XP-980, while Brother also specifies A3 scanning for the MFC-J6940DW.
If you want to digitise paper originals, check the scan size specifically and separately from the print size.
Otherwise, scanning large originals may require an extra step or a different device.
-
Applying photo yields for smaller test sizes to A3
Epson’s stated photo yield for the ET-18100 is based on 10 × 15 cm prints, not A3 mood boards.
Compare usage based on your planned images and number of sheets, and always check the test size used for the manufacturer’s yield figures.
Full-page images and extra rounds of adjustments may mean you need more ink and paper.
-
Treating an older ranking as a current buying recommendation
A place in a list labelled “Test 10/2026” by Testberichte.de is neither a mood-board-specific recommendation nor proof that the product is currently available to buy. Canon Germany marks the PRO-300 and iP8750 as discontinued and permanently unavailable.
Check the full model name and availability, and don’t assume a review applies to a different model.
-
Assuming any A3 paper will be suitable
Information about thicker media and paper feeds applies to the specific model and the feed intended for use.
Check that the paper type and feed match the specifications for the specific printer before buying larger quantities of paper.
Using unsuitable media can lead to unnecessary test prints.
Key brands at a glance
Epson
Epson’s relevant product ranges include A3+ photo printers with cartridges or refillable ink tanks, as well as models with a range of additional features.
- Epson Germany lists thick paper and card as supported media for the XP-15000. The ET-8550 has rear A3+ feeds for thicker media.
- These manufacturer specifications do not prove an independent advantage in quality or cost. For the ET-18100, check the stated yield for 10 × 15 cm prints.
Canon
The PIXMA iX6850 is designed for A3+ printing and has no scanner, while the PIXMA TS9550a series also offers scanning and copying.
- Canon Germany states that the iX6850 supports borderless printing in A3 and A3+.
- According to Canon, duplex printing on the iX6850 must be selected manually. Features of another Canon model cannot automatically be assumed to apply.
Brother
The MFC-J6940DW may be a good option if you need to scan and copy A3 paper originals as well as print them.
- Brother lists printing, scanning and copying up to A3, along with two paper trays.
- These features do not demonstrate an advantage in how mood-board photos will look.
HP
The OfficeJet Pro 9720e is a wide-format all-in-one option for a mix of printing and office tasks.
- HP lists printing, copying and scanning among the model’s functions.
- Before choosing it, check that the specific device’s sizes and media suit your mood board. No independent comparison of its photo-printing quality with the photo models listed here is available.
Matching products on Joybuy
Similar products coming soon.
Frequently asked questions
Is an “A3” specification enough for borderless mood boards?
No, not necessarily. Check the supported borderless size and the recommended paper type separately. Canon Germany lists borderless A3 and A3+ printing for the PIXMA iX6850; this applies to that model and not to all A3 printers.
Can an A3 all-in-one printer automatically scan A3 originals?
No, the print size alone tells you nothing about the scan size. Brother lists scanning up to A3 for the MFC-J6940DW; Epson, on the other hand, specifies A3 printing for the XP-980 but scanning and copying only up to A4.
How can I estimate the cost of printing several A3 mood boards?
Estimate the A3 paper and ink you’ll actually use, based on your images and print volumes. Epson’s yield figure for the ET-18100 is based on 10 × 15 cm photos, so it can’t be converted directly into a number of full-page A3 mood boards.
What should I look for when using thicker paper or card?
Check whether the specific model supports your chosen media and whether it can be loaded into one of the available paper feeds. Epson lists thick paper and card for the XP-15000, and rear feeds for thicker media on the ET-8550.
What should I do before cleaning the print head?
Canon recommends running a nozzle check first to see whether cleaning is needed when maintaining its PIXMA printers. Then follow the instructions for your specific model.