Choose your interface based on how many microphone signals you want to record separately at the same time: for vocals and guitar, each with one microphone, you need two microphone preamps that can be used simultaneously; for a stereo-miked guitar plus vocals, you need three. If you’re using just one microphone and a guitar pickup at the same time, one microphone input and one instrument input may be enough. Then check headphone monitoring, phantom power and how the interface connects to your computer.
Which setup is right for you?
Recording vocals and guitar together
If you want to record both sources separately in the same take, using one microphone for each, you’ll need two microphone preamps that can be used simultaneously. Bonedo describes this two-microphone setup as a good starting point for singer-songwriter recordings.
Solo recordings with a guitar pickup
If you’re recording tracks one at a time, or pairing a vocal microphone with the pickup on an electro-acoustic guitar, one microphone input and one instrument input may be enough. Focusrite describes the Scarlett Solo 4th Gen’s instrument input as suitable for guitars with a pickup.
Stereo guitar and vocals in the same take
For two guitar microphones and one vocal microphone, you’ll need three separate microphone preamps that can be used simultaneously. Count the microphone inputs, rather than simply adding up all the connections on the device.
What should you look for when buying?
Bonedo recommends at least two inputs for typical vocal-and-guitar recordings. What matters is how many of them need to be microphone preamps for your particular setup.
| What you need |
What to check before buying |
Who is this important for? |
| Two microphones at the same time |
Two XLR microphone preamps that can be used simultaneously; check whether the microphones need 48 V power. |
If I want to record vocals and guitar separately in one take, I need two microphone channels. Around 38% of consumers prioritise recording two separate microphone signals in the same take. |
| Headphone monitoring |
A headphone socket and a suitable connection; documented direct monitoring and an easy-to-reach volume control. |
In a small booth, I want to be able to monitor my performance and input level through headphones. Around 23% of consumers prioritise controllable headphone monitoring. |
| Microphone plus guitar pickup |
Check that the guitar has a pickup; make sure the microphone and instrument inputs can be used at the same time. |
If I’m using no more than one microphone and want to connect my guitar via its pickup, I don’t necessarily need a second microphone preamp. Around 23% of consumers prioritise this combination of inputs. |
| Three microphones in the same take |
At least three microphone preamps that can be used simultaneously; check the power supply requirements for your computer. |
For two guitar microphones and vocals on separate tracks, I need three microphone channels. Around 16% of consumers prioritise recording more than two microphone signals in the same take. |
Common buying mistakes
-
Assuming every input has a microphone preamp
Line and instrument inputs don’t automatically count as microphone inputs. To record two guitar microphones and vocals in the same take, you’ll need three separate microphone channels.
Before buying, list all the signals you want to record at the same time, then check them against the connection diagram for the specific model.
-
Expecting a new interface to improve the sound in your booth
As Shure explains, microphone choice and placement affect the sound of an acoustic recording. Extra inputs won’t automatically fix a poor recording space.
Make a short test recording with the microphone positions you plan to use before attributing any differences in sound to the interface alone.
-
Assuming a software trial is a permanent licence
PreSonus describes the Fender Studio Pro software included with the Studio 24c as a six-month trial, not a permanent licence.
Check the term and licence conditions for the specific offer separately from the hardware specifications.
Key brands at a glance
Focusrite
The Scarlett Solo 4th Gen and 2i2 4th Gen mainly differ in whether you can connect one or two XLR microphones at the same time.
- Focusrite says both models offer headphone level control and direct monitoring.
- On the Solo, the additional input is for line or instrument signals. On the 2i2, using a jack input disables the corresponding XLR input; when switched on, 48 V phantom power is supplied to both XLR inputs.
MOTU
The M2 is a two-microphone option, while the M6 is designed for setups with up to four microphones connected at the same time.
- MOTU lists individually switchable phantom power and input monitoring for the M2. The M6 has two headphone outputs.
- The M6 is larger than the M2. According to MOTU, it needs a DC power supply when connected to a USB-A host; bus power is available with a USB-C host.
Audient
The EVO 4 is a two-input option for anyone who’d like a helping hand when setting levels.
- Audient describes it as having two microphone preamps and Smartgain, which sets the input gain based on a signal.
- Smartgain is a manufacturer feature and doesn’t replace checking your recording level.
PreSonus
The Studio 24c offers two microphone, instrument or line inputs that can be used simultaneously, plus a control for balancing the input signal with computer playback.
- According to PreSonus, it also includes level meters and MIDI connections.
- The included Fender Studio Pro software is a six-month trial, not a permanent licence.
Compatible products at Joybuy
Compatible products coming soon.
Frequently asked questions
Is an interface with two inputs enough for vocals and acoustic guitar?
Yes, if you want to record both sources at the same time on separate tracks, using one microphone for each, and both inputs have microphone preamps. Two microphone inputs won’t be enough for two guitar microphones plus vocals in the same take.
When should I switch on 48 V phantom power?
Follow the requirements of the microphone you’ve connected: condenser microphones need a power supply, while standard dynamic microphones usually don’t. On the Scarlett 2i2 4th Gen, phantom power is supplied to both XLR inputs when switched on.
What should I test first in a small booth?
Make a short test recording with the microphone in the position you plan to use, checking how much room sound you pick up, the loudest passage and your headphone monitoring. Shure notes that microphone choice and placement affect the sound of an acoustic recording.
How many microphone inputs do I need for two guitar microphones and vocals?
For three separate microphone signals in the same take, you need at least three microphone preamps that can be used simultaneously. Line or instrument inputs don’t automatically count towards this.
What should I look for on product labels in Germany?
As part of its market surveillance, the German Federal Network Agency checks, among other things, for correct CE marking, identifiable manufacturer details and a German-language user manual with the required instructions and warnings. Check these details on the specific product listing.