Which interface is right for you?

Guitarists using a microphone

If you want to capture the sound of your acoustic guitar in the room, look for a suitable microphone input and check whether your microphone needs phantom power. Microphone placement also affects your recording, as Shure explains in its guide to microphone techniques.

Guitarists using a microphone and pickup

If you want to record both signal paths at the same time on separate tracks, the microphone and instrument inputs must be usable simultaneously. Focusrite and Yamaha describe different channel and input configurations for their respective models, so check the exact layout before you buy.

Home recordists planning to expand

If you want to record several microphones or other sources at the same time in future, distinguish between built-in microphone preamps and digital expansion connections. Audient describes ADAT as an expansion option on the iD14 MKII; additional microphone sources require suitable external hardware. SSL lists four built-in preamps for the SSL 12.

What to look for when buying

First decide whether you want to record the sound of the room with a microphone, the pickup signal directly, or both at the same time. Extra channels matter most when you have specific plans to record additional sources.

What you need What to check before buying Who should pay particular attention
Microphone input Microphone preamp, XLR connection and 48 V phantom power if your microphone needs it. If I want to capture the guitar’s acoustic sound in the room, the microphone and its position are key. Around 36% of consumers put microphone sound first.
Two separate signal paths Check the manual to see whether the microphone and instrument can be used simultaneously on separate channels. If I want to combine the microphone sound with the direct pickup signal, I need to record both separately. Around 29% of consumers prioritise this combination.
Monitoring and computer setup Check direct monitoring, the headphone socket and controls, as well as downloads and system requirements for the specific model. If I want to hear the signal while playing and keep setup on my computer straightforward, a suitable monitoring and software workflow matters. Around 21% of consumers prioritise this workflow.
Additional microphone channels Count the built-in microphone preamps that can be used simultaneously. If using ADAT, allow for suitable extra hardware too. If I want to record several microphones or other sources at the same time in future, the number of channels I can actually use needs to be right. Around 14% of consumers prioritise extra recording channels.

Common buying misconceptions

  • Counting visible XLR and jack sockets as two independent channels

    On the fourth-generation Focusrite Scarlett 2i2, plugging into a front jack socket disables the XLR microphone input with the same channel number, as Focusrite explains in the user guide.

    For simultaneous microphone and pickup recording, plan to use different, suitable channel numbers.

  • Assuming a guitar interface will support a microphone track later

    According to the manufacturer, the IK Multimedia iRig HD X is designed around an instrument input. It isn’t a confirmed choice if you want to add a separate microphone track that can be recorded at the same time.

    If you need both signal paths, check the connections and channel configuration of the complete model before buying.

  • Confusing expansion channels with built-in microphone preamps

    Audient describes the iD14 MKII as having two built-in microphone preamps and ADAT expansion. Using ADAT for additional microphone sources requires suitable external hardware.

    First count how many microphone tracks you need to record at the same time, then compare built-in preamps and expansion connections separately.

  • Expecting a new interface to solve room or microphone placement issues on its own

    Shure describes microphone choice and placement as important factors in the sound of an acoustic recording.

    Listen back to test recordings on headphones and try different microphone positions before changing your interface just to improve the sound.

Key brands at a glance

Focusrite

The fourth-generation Scarlett 2i2 is worth considering for microphone recording, a pickup, or a combination of both signal paths.

  • Focusrite lists two microphone preamps and instrument inputs for this model.
  • According to Focusrite, using a front jack disables the XLR input on the same channel. You’ll need different channel numbers for the microphone and pickup.

Yamaha

The UR22MK3 is a two-channel option for microphone recording or combining a microphone with a guitar pickup.

  • Yamaha lists two microphone preamps, 48 V, a Hi-Z input and direct monitoring.
  • The Hi-Z input isn’t specified for both channels. Check that the exact channel configuration suits your setup.

Audient

The iD4 MKII offers a microphone and an instrument signal path. The iD14 MKII may suit you if you need two microphones and the option to expand via ADAT.

  • Audient lists a microphone preamp, an instrument input and Monitor Mix for the iD4 MKII. For the iD14 MKII, Audient lists two microphone preamps and ADAT.
  • Additional microphones via ADAT require suitable external hardware. Manufacturer claims about sound quality aren’t independent comparative measurements.

IK Multimedia

The iRig HD X is designed for directly recording a guitar with an existing pickup.

  • The manufacturer lists an instrument input and a headphone output.
  • This model isn’t a confirmed choice if you want to add a microphone track.

Solid State Logic

The SSL 12 is worth considering if you have specific plans to connect more than two microphones at once or create separate headphone mixes.

  • SSL lists four built-in analogue preamps, ADAT and configurable headphone mixes for this model.
  • These extra features don’t offer a proven advantage if you’re recording a single guitar track.

Joybuy products

Suitable products will be available soon.

Frequently asked questions

Do I always need 48 V for my guitar microphone?

No, 48 V isn’t always necessary. Only switch on phantom power if your specific microphone needs it, and check the manufacturer’s guidance. Focusrite describes condenser microphones as a common use for phantom power.

Can I connect a microphone and pickup to the same channel on the fourth-generation Scarlett 2i2?

No. According to Focusrite, plugging into a front jack socket disables the XLR microphone input with the same channel number. To record two separate signals, use different channels and set the guitar channel to instrument mode.

How can I find the right microphone position?

Monitor through headphones and make short test recordings from different positions. Shure describes microphone choice and placement as important factors in the sound; Focusrite also recommends judging the position by listening to test recordings.

What should I check before buying for my computer and recording setup?

Check that your microphone, suitable cables, headphones and recording software will all work with your planned setup. For the fourth-generation Scarlett 2i2, Focusrite provides downloads for Windows, including drivers, and for Mac. Check compatibility with your specific operating system.

Can I put an old audio interface in household waste in Germany?

No. Section 10 of the German Electrical and Electronic Equipment Act (ElektroG) requires old electrical equipment to be collected separately from unsorted household waste. The German Environment Agency lists recycling centres and suitable retail take-back points among the available options.