Which recording setup is right for you?

Capture your acoustic sound with a microphone

If you want to record your guitar’s sound using a microphone, you’ll need a suitable mic input and as quiet a space as possible. Shure recommends adjusting the microphone position or shielding the instrument more effectively if you’re picking up unwanted noise.

Record directly using a pickup

If your guitar has a pickup output, you can record its electrical signal directly using a suitable instrument input. For example, Yamaha lists a Hi-Z input on the UR22MK3.

Work with headphones at a compact desk

If you share your workspace, the available desk space, accessible controls, cabling and power supply can all affect your setup. Check that the headphone connection and monitoring options suit the way you work.

What should you look for when buying?

First decide whether you want to record using a microphone, a pickup signal or both at the same time. Then check that the inputs and monitoring options meet your needs at a shared workspace.

What you need What to look for Who is it most important to?
Recording with a microphone in a shared room Check for an XLR mic input and, if needed, 48 V phantom power; plan to record in a suitable spot. If you want to capture your guitar’s acoustic sound with a microphone, its position and the room both matter. Around 29% of consumers say microphone sound is their main priority.
Recording directly via a pickup Check that your guitar’s pickup output matches a suitable Hi-Z or instrument input. If your guitar has a pickup and you want to record without a microphone stand, you’ll need the right signal path. Around 29% of consumers say direct recording is their main priority.
Headphone monitoring Check the headphone socket, connector, direct monitoring and, where relevant, the mix of the input signal and computer playback. If you want to play through headphones at a shared desk, you’ll need a suitable connection and monitoring controls that work for you. Around 21% of consumers put headphone monitoring first.
Desk space and computer connection Check the dimensions, socket positions, space for cables, and the USB and power requirements of the specific model. If your desk space is limited, or you use a particular computer or hub, make sure the connection suits your planned setup. Around 21% of consumers prioritise a compact setup with compatible connections.

Common misconceptions

  • Two sockets don’t automatically mean you can use two recording paths at once

    On the 4th-generation Focusrite Scarlett 2i2, connecting a jack disables the XLR mic input on the same channel.

    Before buying, assign each planned signal to a channel you can use at the same time. If you want to record a microphone and pickup in parallel, check the channel layout of the specific model.

  • An interface alone won’t give you a quiet microphone recording

    A microphone can pick up room ambience and unwanted noise, and its position affects the result.

    Try recording in the spot you plan to use. If you’re picking up unwanted noise, Shure recommends moving the microphone closer to the loudest sound source or shielding the instrument more effectively.

  • A Hi-Z input can’t make up for a guitar without a pickup

    An instrument input processes the electrical signal connected to it. A guitar without a pickup won’t send the sound of its body through that input by itself.

    First check whether your guitar has a suitable pickup output. If it doesn’t, you’ll need a microphone to capture its acoustic sound.

  • A USB-C connector doesn’t guarantee power or system compatibility

    Power requirements vary by model. Audient specifies a minimum of 0.9 A at 5 V from a suitable USB 3.0 port for the iD4 MKII.

    Before choosing an interface, check the requirements for the specific model generation against your computer and the hub you plan to use.

Brands and suitable model ranges

Focusrite

The 4th-generation Scarlett 2i2 offers two channels, direct monitoring, and model-specific controls including Auto Gain and Clip Safe.

  • Focusrite lists two XLR mic inputs and two instrument sockets.
  • Connecting a jack disables the XLR input on the same channel. The 48 V phantom power applies to both mic inputs together.

Yamaha

The UR22MK3 is a two-channel interface for microphone and guitar signals, with direct monitoring.

  • Yamaha lists two Mic/Line combo sockets, a Hi-Z input and dimensions of 158 × 47 × 102 mm.
  • The UR22MK3 is listed with one headphone output; two independently usable headphone connections are not specified. Don’t confuse it with the differently specified UR22C.

MOTU

The M2 has two Mic/Line/Hi-Z combo sockets for microphone or instrument signals.

  • MOTU lists separate 48 V and monitor switches for the two inputs, as well as a headphone output.
  • Manufacturer claims of especially high sound quality or speed are comparisons made by the manufacturer, not independently verified test results.

PreSonus

The Studio 24c combines two Mic/Instrument/Line inputs with a mix control for the input signal and computer playback.

  • PreSonus lists a headphone output and includes USB-C to USB-C and USB-C to USB-A cables.

Audient

The iD4 MKII is designed for one microphone and one instrument source.

  • The technical documentation lists a microphone preamp and a D.I. instrument input.
  • This input configuration isn’t suitable for connecting two microphones at once. Audient specifies a minimum of 0.9 A at 5 V from a suitable USB 3.0 port.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need an instrument input for a purely acoustic guitar?

For a microphone recording, a suitable mic input is essential. A direct instrument input is designed for the electrical signal from a guitar with a compatible pickup output.

Is an interface with two inputs enough to record a microphone and pickup at the same time?

Only if you can use the required microphone and instrument paths at the same time. On the 4th-generation Focusrite Scarlett 2i2, connecting a jack disables the XLR socket on the same channel, so the microphone and guitar need to use different channels.

How can I reduce background noise when recording with a microphone?

Shure recommends experimenting with the microphone’s position and distance. If you’re picking up unwanted noise, move closer to the sound source or shield the instrument more effectively. This is a recording technique, not a guarantee that the interface will reduce noise.

What should I check before connecting the interface?

Check the specific model’s USB port and power requirements against your computer and the hub you plan to use. For example, Audient specifies a minimum of 0.9 A at 5 V from a suitable USB 3.0 port for the iD4 MKII.

What does the CE marking tell me about an audio interface?

The Federal Network Agency describes CE marking as a declaration made by the manufacturer under its own responsibility that the relevant EU requirements have been met. It isn’t an independent mark of sound quality or overall quality.