Who are the different recording options suitable for?

Recording in a reverberant hall

If you want the guitar to stand out against room reverberation and background noise, experiment with the microphone position and distance. Audio-Technica and Shure describe placing a microphone close to the instrument as one way to control how much of the room is picked up.

Guitarists looking for a particular sound

If you want to balance the pick attack and body tone, try different microphone positions. Audio-Technica describes various positions for recording acoustic guitar; with an external microphone, you’ll also need a suitable recording input.

Recording rehearsals on the move

If you want to record a rehearsal with minimal setup, consider a standalone recorder with built-in microphones. Zoom says the H1essential can record on its own, but the microphones’ position is fixed in relation to the recorder.

What should you consider when choosing a microphone?

First decide whether you want to reduce room reverberation, shape the guitar sound, record on the move or deliberately capture the hall’s acoustics.

Audio-Technica and Shure recommend assessing the distance and position with short test recordings. The percentages show how consumers prioritise their main buying considerations in the recording situations described.

Priority What to look for when buying Who it matters most to
Direct guitar sound Check the polar pattern and mounting options; compare the distance and direction in the hall using test recordings. If I want as little room sound as possible on the guitar track in a reverberant hall, I’d try different distances and angles. Around 36% of consumers prioritise controlling room reverberation.
Balanced guitar sound Start at the neck-body joint, then listen to how changes in direction affect the balance between pick attack and body tone. If a balance between pick attack and body tone is important to me, I’d compare several positions. Around 29% of consumers focus on the guitar sound.
Simple mobile setup Check whether the recorder can record on its own and whether its position in the room is practical. If I want to record rehearsals without a separate microphone, I’d consider a portable recorder. Around 21% of consumers prioritise a simple recording setup.
Stereo and room sound Check that two microphone inputs can be used at the same time and can power both microphones; if the microphones are in separate positions, watch out for phase problems. If I want the hall to be an intentional part of my stereo recording, I’d test the microphone arrangement and the amount of room sound. Around 14% of consumers prioritise the stereo and room sound they’re looking for.

Common misconceptions when buying a microphone

  • A more sensitive or expensive microphone will automatically solve reverberation problems

    The room’s acoustics, distance and microphone position all affect how much of the room is picked up. Shure recommends positioning the microphone close to the source when room sound is a problem. However, placing it too close can alter the guitar’s tonal balance.

    Start by making short recordings in several positions around the hall, then decide whether you need any additional equipment.

  • A single NT5 is the same as the matched pair

    RØDE sells the NT5 individually and as a matched pair for stereo recording. The options differ in whether they include one or two microphones.

    Check the exact version against the recording you want to make and the number of inputs you can use at the same time.

  • An XLR condenser microphone works without the right power supply

    Requirements vary by model. RØDE specifies P48 phantom power for the NT5; AKG gives a power supply range of 44–52 V for the P170.

    Check the requirements for the specific microphone and compare them with the microphone input you have available.

Microphone and recorder brands to know

AKG

AKG describes the P170 as a directional small-diaphragm condenser microphone for acoustic guitar and other string instruments.

  • AKG specifies an XLR output and a required power supply of 44–52 V for the P170.
  • Your existing input must provide this power; the manufacturer’s specifications don’t prove that it will sound better in a community hall.

RØDE

The NT5 is a directional condenser microphone, also available from RØDE as a matched pair for stereo recording.

  • RØDE specifies XLR and P48 phantom power; the pair is a relevant option for a stereo setup.
  • A pair needs two microphone inputs that can be used at the same time. Check whether you’re buying a single microphone or the pair.

Shure

Shure offers the SM81 as a condenser option for acoustic instruments and the dynamic SM57 as an instrument microphone.

  • Shure specifies phantom power for the SM81; for the SM57, the company describes a contoured frequency response.
  • These model features don’t tell you which microphone will sound more natural in a particular hall.

Audio-Technica

The ATM450 is a directional instrument microphone with a side-address design for flexible positioning.

  • Audio-Technica specifies a switchable 80 Hz high-pass filter and a 10 dB pad.
  • These features are no substitute for a test recording to find the right tonal balance in your particular hall.

Zoom

The H1essential is a portable recorder with built-in X/Y microphones, so you can record without a separate microphone.

  • Zoom specifies standalone recording and USB microphone operation.
  • You can’t position the built-in microphones independently of the recorder; the distance from the guitar still affects how much of the room is picked up.

Suitable products on Joybuy

For a focused sound with a single microphone, consider the AKG P170 or Audio-Technica ATM450. If you’d like to try stereo recording, the RØDE NT5 matched pair is worth considering. The Shure SM81 is another condenser option for acoustic instruments, while the Zoom H1essential offers a portable, all-in-one recording setup with built-in X/Y microphones.

Frequently asked questions

Where should I start by placing the microphone in a community hall?

For a single acoustic guitar, start by pointing the microphone towards the neck-body joint and listen to short recordings at different distances and angles. If there’s too much room sound, moving the microphone closer may help; placing it too close can make the sound seem bass-heavy.

Do I need an audio interface for a condenser microphone?

You need a suitable recording input, but it doesn’t have to be a device called an audio interface. For example, RØDE specifies XLR and P48 phantom power for the NT5; check that your recording device meets these requirements. The Zoom H1essential can record on its own using its built-in microphones.

What should I check before making a stereo recording?

Check that you have two microphones and two suitable inputs that can be used at the same time. For separately positioned microphones, Audio-Technica recommends keeping them at roughly equal distances from the instrument to avoid phase problems.

Can I simply record other people or someone else’s performance in a community hall?

Not necessarily. Section 201 of the German Criminal Code (StGB) covers the unauthorised recording of another person’s non-public speech; Section 77 of the German Copyright Act (UrhG) gives performers the exclusive right to record their performance on a sound carrier. Whether these provisions apply to a particular recording, and what permissions are needed, depends on who is speaking or performing and how the recording will be used.

Can I publish a recording that includes someone else’s music?

Check the relevant usage rights separately before publishing. GEMA provides information about licensing public performances of music, music online and sound recordings; buying a microphone doesn’t give you any music rights.