Who are the different microphones suited to?

Recording at a busy desk

If you share a desk or room, you can position the guitar deliberately, but a microphone won’t completely block out other people’s voices. Focusrite and Shure explain how microphone placement and polar patterns affect a recording.

Beginners without an audio interface

If you want to get started on your computer with as little extra equipment as possible and monitor the sound as you set things up, a USB microphone with headphone monitoring could be a good option. Audio-Technica describes these features on the AT2020USB-X, while RØDE lists USB as a connection option for the NT1 5th Generation.

Guitarists who already have an interface

With a suitable interface, you can connect an XLR microphone and fine-tune its position and the sound of your guitar. LEWITT describes the LCT 040 MATCH as suitable for acoustic guitar, and lists XLR and 48 V phantom power as part of its connection setup.

What should you look for when buying?

USB condenser microphone

Suitable if: you want to record straight to your computer without a separate microphone interface. A model with headphone monitoring helps you check the recording and microphone position.

Trade-off: A desk stand saves you buying extra accessories to begin with, but it can leave the microphone more exposed to desk noise and limit where you can position it.

Small-diaphragm XLR condenser microphone

Suitable if: you already have a compatible interface or want to position a compact microphone precisely in relation to the guitar. LEWITT describes the LCT 040 MATCH as a space-saving option for acoustic guitar.

Trade-off: The single LCT 040 MATCH needs a suitable XLR input, a cable and, as a condenser microphone, 48 V phantom power. The single-microphone version is not a stereo pair.

Dynamic XLR instrument microphone

Suitable if: you already have an interface and want to try close, directional instrument miking. The Shure SM57 is one model to consider.

Trade-off: Shure describes it as having a shaped instrument sound. Try some test recordings to decide whether that suits the acoustic guitar sound you’re after. The microphone on its own is not a USB model that you can connect directly.

Large-diaphragm condenser microphone with USB and XLR

Suitable if: you want to start with USB but may also record through an interface later. RØDE lists guitar as one of the uses for the NT1 5th Generation.

Trade-off: Check that you have enough space and a suitable mount at your shared desk. According to RØDE, the NT1 5th Generation’s 32-bit float feature is limited to USB and does not remove room noise.

Focusrite describes mono and stereo recording, and notes that poor stereo microphone placement can cause phase problems. Shure explains how polar patterns and the angle of incoming sound affect a recording.

Priority What to check before buying Who is this particularly important to?
Background noise and desk space Polar pattern, the side you speak or sing into, and a suitable mount. Then make a test recording under typical room conditions. If I’m recording at a shared desk, I want to be able to position the guitar without assuming that conversations will be blocked out. Around 36% of consumers put control of background noise first.
Connection and monitoring For USB, check the model’s connection and monitoring features. For XLR, check the interface inputs and whether phantom power is required. If I want to get started on my computer without a separate interface and monitor the sound while setting things up, I need a straightforward signal path. Around 29% of consumers prioritise a simple connection.
Guitar sound and recording width Consider whether a mono track will be enough to start with and whether you can position the microphone in different places in relation to the guitar. Guitar sound is my priority: I want to weigh up microphone positions, as well as mono and stereo. Around 21% of consumers prioritise shaping the sound.
What you’ll need for the complete setup Check what’s included, which inputs you already have, and whether you’ll need a cable, stand and space for your chosen microphone position. When planning my setup, I want to know which parts I already have and what else I need for the position I want. Around 14% of consumers focus primarily on the overall setup.

Which common buying mistakes can you avoid?

  • Assuming a cardioid pattern will block out all other sound

    How directional a microphone is depends on the angle at which sound reaches it. Even a directional microphone will still pick up noise in the room. Shure explains how pickup depends on the polar pattern and the angle of incoming sound.

    Try recording while the shared room is being used as usual, and position the microphone and guitar with noise sources in mind.

    Moving the setup and making more test recordings can add time to the process.

  • Focusing on the microphone and overlooking how it connects

    A single XLR microphone is not a USB recording kit that you can plug straight in. For the LCT 040 MATCH, LEWITT recommends an interface or preamp with an XLR connection and 48 V phantom power. For connecting the SM57 directly to a computer, Shure points to a separate bundle that includes an interface.

    Check the microphone’s connection against the inputs you already have, any phantom power required and what’s included in the box.

    Depending on your current setup, you may need an interface, a cable and a suitable mount.

  • Assuming stereo is automatically the better choice for a shared desk

    Stereo can give you a wider recording, but it takes up more space and needs careful positioning. Focusrite notes that poor placement can cause phase problems.

    First, see whether a well-positioned mono track does the job before planning to buy a stereo pair.

    A stereo pair needs a second microphone, another suitable input and more space.

  • Thinking 32-bit float or low self-noise will filter out room noise

    According to RØDE, 32-bit float on the NT1 5th Generation is only available over USB. This feature and a low self-noise figure do not mean that other people’s conversations will disappear from the recording.

    Consider the recording format, connection type and how you’ll manage room noise separately.

Which brands are worth considering?

Audio-Technica

The AT2020USB-X is a USB option for recording music on a computer, with a desk stand and direct headphone monitoring.

  • Audio-Technica lists USB-C, a cardioid pattern, a monitor mix, a desk stand and a headphone socket for direct monitoring.
  • The optional shock mount is not included in the described package. Check whether the desk stand lets you position the microphone where you want it in front of the guitar.

LEWITT

The single LCT 040 MATCH is a compact small-diaphragm instrument microphone for focused guitar recordings. A separate stereo pair is also available.

  • LEWITT lists acoustic guitar use, a cardioid pattern and a space-saving design among the model’s features.
  • For connection, LEWITT recommends an interface or preamp with an XLR connection and 48 V phantom power. The single-microphone version is not a stereo pair.

Shure

The SM57 is a dynamic XLR option for close, directional instrument miking.

  • Shure describes the SM57 as having a cardioid pattern and a shaped instrument sound.
  • For digital recording on a computer, the microphone on its own needs a suitable connection. It is not a USB model that you can plug straight in.

RØDE

The NT1 5th Generation is a large-diaphragm condenser microphone with USB and XLR connections.

  • RØDE lists guitar as one of its uses and includes a shock mount and cable in the box.
  • According to RØDE, 32-bit float is limited to the USB output. The feature does not remove room noise.

Matching products on Joybuy

Matching products coming soon.

Frequently asked questions

Where should I position the microphone if I’m playing guitar at my desk?

Start with a position in front of the guitar that’s within easy reach, then compare short test recordings made from different angles and distances using headphones. Point the microphone’s front towards the guitar. Focusrite and Shure explain how placement and the angle of incoming sound affect a recording. There’s no single position that works for every guitar and room.

Do I need phantom power for an XLR condenser microphone?

For the LEWITT LCT 040 MATCH, the manufacturer’s instructions specify an interface or preamp with an XLR connection and 48 V phantom power switched on. Check that your particular interface has what you need. A microphone connected directly via USB doesn’t need a separate microphone interface.

Should I buy two microphones straight away for a single guitar?

Not necessarily: a mono track is a good place to start. Focusrite explains that stereo can sound wider, but needs careful positioning and can cause phase problems if the microphones are poorly placed. A stereo pair also needs two microphones, suitable inputs and more space.

What legal considerations should I bear in mind when recording in a shared workspace?

In Germany, Section 201 of the German Criminal Code (StGB) covers the unauthorised recording of another person’s non-public speech in the circumstances set out in the law. The Federal Ministry of Justice publishes the text of the legislation. So avoid pointing the microphone at other people’s conversations, and discuss any planned recording that might capture them in advance. You can’t determine conclusively whether a particular situation falls under this provision from the recording setup alone.

What extra equipment should I allow for before buying?

Check the complete connection setup. With XLR, you may need an interface, cable and stand. With USB, check whether the included stand lets you position the microphone where you want it for the guitar. What else you’ll need depends on the microphone and the equipment you already have.