Who are the different microphone options suited to?

Guitarists recording in a reverberant room

If you’re recording in an untreated room, positioning and microphone direction can help bring the direct guitar sound to the fore and reduce room sound and unwanted noise. In rooms with poor acoustics, Shure recommends experimenting with distance and placement.

Beginners without an audio interface

If you want to record straight to your computer, a USB microphone is an obvious choice. The Audio-Technica AT2020USB-X offers USB-C connectivity and direct headphone monitoring.

Guitarists with an XLR setup

If you already have a suitable XLR input, you could consider a single small-diaphragm condenser microphone for recording instruments. A stereo pair is another option if you want a more spacious recording and like the sound of the room captured alongside it.

What should you consider when choosing?

Dynamic XLR instrument microphone

A good fit if: you prefer close mono recording and want to limit unwanted noise with careful positioning and microphone direction.

Consider: The Shure SM57 has a sound profile described by the manufacturer, and you’ll also need a suitable XLR interface and enough preamp gain.

Single small-diaphragm condenser microphone

A good fit if: you want a detailed instrument sound and can try out different positions and assess the room sound.

Consider: The XLR models covered here need a suitable phantom power supply; details can be captured alongside unwanted room sound.

USB condenser microphone

A good fit if: you want to get started directly on a compatible computer without a separate XLR interface.

Consider: A straightforward connection won’t treat the room; check that you can position the microphone on a stand to suit guitar recording.

Stereo pair of small-diaphragm microphones

A good fit if: after trying mono, you decide you want a more spacious guitar recording and like the way the room sounds.

Consider: You’ll need two microphones and suitable recording channels; a stereo pair isn’t automatically the right choice in a room with poor acoustics.

First, think about what matters most to you: controlling room sound, capturing guitar detail, connecting easily to a computer or recording in stereo.

Criterion What to check before buying Who is it important to?
Limit room sound Polar pattern and microphone direction; space for a stand so you can try different positions. If I’m recording in an untreated room, I want the direct guitar sound to come through more strongly than distracting room sound. Around 36% of consumers also prioritise limiting room sound.
Capture guitar detail Single microphone or pair; if using an XLR condenser microphone, check that your recording equipment provides the required phantom power. If a detailed instrument sound matters to me, I want to be able to try different positions and use a suitable XLR setup. Around 29% of consumers put guitar detail first.
Computer connection USB or XLR connection, any existing interface, and the cables and phantom power required. When I’m getting started, I want to connect as little extra equipment as possible. Around 21% of consumers prioritise a straightforward computer connection.
Mono or stereo If you choose a pair, make sure you have two suitable inputs and first check whether you like the added sense of space. If I’m aiming for a deliberately spacious recording, I’m happy to use extra equipment and capture more of the room. Around 14% of consumers put stereo imaging first.

Which mistakes should you avoid?

  • Expecting a better microphone to make up for poor placement

    Changing microphones won’t automatically get rid of room reflections. Distance and position affect how much room sound ends up in the recording.

    Before you buy and once your setup is ready, make short test recordings from several positions and compare them.

    Without trying different positions, buying new equipment could leave the distracting room sound in place instead of addressing the real recording problem.

  • Treating USB and XLR as interchangeable connections

    A USB microphone can connect directly to a compatible computer; an XLR microphone needs suitable recording equipment. XLR condenser microphones may also require phantom power.

    Consider the whole signal chain and check which cables and accessories are included with the specific product you’re looking at.

    An XLR setup may require an interface, an XLR cable or a suitable phantom power supply.

  • Assuming stereo is always better than mono

    A stereo pair captures more of the room as well as the guitar. In an untreated room, that extra sense of space may be exactly what you don’t want.

    Start by assessing a mono recording, and choose a pair only if you like the added sense of space when you listen back.

    A pair means buying a second microphone and, if necessary, using a recording device with two suitable channels.

Which brands offer suitable microphone options?

Shure

The SM57 is an example of a dynamic XLR instrument microphone for close mono recording.

  • Shure describes the SM57 as directional and suitable for recording instruments.
  • Its sound profile won’t be neutral for every acoustic guitar; this description applies to the SM57, not every microphone from the brand.

LEWITT

The LCT 040 MATCH is available as a single small-diaphragm condenser microphone or as a matched stereo pair.

  • LEWITT lists acoustic guitar as a suitable application and specifies a cardioid polar pattern.
  • When buying, check whether you’re choosing the single microphone or the pair, and make sure you have the required 48 V phantom power.

RØDE

The NT5 is an XLR small-diaphragm condenser microphone, while the NT1 5th Generation offers both XLR and USB-C on that model.

  • According to the manufacturer, the NT5 is also available as a pair and requires P48.
  • The two connection options on the NT1 5th Generation aren’t available on the NT5; neither connection type removes the need to assess your room.

Audio-Technica

The AT2020USB-X is a cardioid USB condenser microphone for connecting directly to a computer.

  • Audio-Technica lists USB-C and direct headphone monitoring as features.
  • An easy connection won’t treat the room; check that you can position the microphone suitably for guitar recording.

sE Electronics

The sE7 is an XLR small-diaphragm condenser microphone for acoustic guitar and other instruments.

  • The manufacturer lists a cardioid polar pattern, a switchable pad and an 80 Hz high-pass filter.
  • The high-pass filter is a sound-shaping option, not a fix for room reflections; the model requires 48 V phantom power.

Suitable products on Joybuy

Suitable products coming soon.

Frequently asked questions

Where should I start by positioning a single microphone?

As a starting point, Shure recommends pointing the microphone towards around the 12th fret, at a distance of approximately 20 cm from the guitar. Then compare several positions, as distance and direction affect the guitar and room sound captured in the recording.

Do I need phantom power for an XLR condenser microphone?

The NT5 and LCT 040 MATCH models covered here are specified as requiring P48 or +48 V; the manufacturer also specifies +48 V for the sE7. Before buying, check whether your particular interface or recorder can provide this power.

Will a high-pass filter remove room sound?

No. The 80 Hz high-pass filter specified for the sE7 filters low frequencies; it doesn’t replace a change to the microphone’s position or distance. Compare recordings with the filter on and off to see which you prefer for the guitar’s bass.

What rights do I have in Germany if my microphone is faulty?

When you buy from a business seller, statutory consumer rights generally apply. The European Union’s consumer information states that you have at least two years from receiving the goods to contact the seller. This is separate from any additional manufacturer’s warranty.

Do I need to register a radio frequency for a wired microphone?

The Bundesnetzagentur’s general allocation for radio microphones applies to wireless devices, not the wired USB and XLR microphones covered here. If you’re considering a wireless microphone instead, check its frequency band and the conditions of Verfügung 37/2026, published on 15 April 2026.