Which microphone is right for you?

Guitarist recording in a small booth

If you want to record a single acoustic guitar track, you’ll need to balance mic position, reflections and background noise. Shure and RØDE both describe experimenting with distance and orientation as part of microphone placement.

Beginner without an audio interface

If you’re mainly looking for a suitable way to connect your microphone to your computer, check the connection on the specific model and consider whether you might want to use XLR later. Shure describes an audio interface as the link between an analogue microphone signal and a computer.

Guitarist aiming for a stereo recording

If you want to capture a more spacious sound, plan for two microphones, two channels and a phase check. RØDE points out that two microphones of the same model are not automatically a matched pair.

What should you look for when choosing?

Single small-diaphragm condenser microphone with XLR

A good fit if: you have an existing interface and want to record a single guitar track while experimenting with mic placement in the booth. The PRO37, P170 and NT5 are documented examples, but there’s no evidence that they sound alike.

Things to consider: A cardioid polar pattern won’t eliminate reflections in the booth. Connections, accessories and phantom power requirements vary by model.

Single microphone with USB and XLR

A good fit if: you want to start recording directly on your computer without a separate XLR interface, while keeping XLR as an option for later. The NT1 5th Generation is a documented example with this combination of connections.

Things to consider: A USB connection won’t correct poor microphone placement or the sound of the booth. You’ll still need a suitable recording setup to use XLR.

Two small-diaphragm microphones as a stereo pair

A good fit if: you’re specifically looking for a more spacious guitar sound and have two recording channels, as well as time to set up and check the recording in mono. The NT5 is also available as a matched pair.

Things to consider: Setting up takes more space and care. Two microphones of the same model aren’t automatically a matched pair, and phase differences may matter.

Priority What to check when buying Who is this especially important to?
Booth acoustics Polar pattern, room for a stand and repositioning; listen to the sound with your own booth and guitar. If I want to reduce unwanted room sound, I need a position that works in my booth. Around 31% of consumers would put booth acoustics at the top of their list.
Sound detail and tonal balance Try positioning a single microphone around the 12th fret, then adjust its direction and distance by ear. If the balance between pick attack, strings and body is particularly important to me, I want to be able to adjust the position to suit my guitar. Around 31% of consumers would prioritise sound detail and tonal balance.
Connection and recording setup Check that your inputs and phantom power meet the requirements of the specific model; factor in a cable, stand and, if needed, an interface. If I need a reliable way to connect to my computer, I want to know in advance which devices and connections will work with my microphone. Around 23% of consumers would put connectivity at the top of their list.
Stereo and setup effort Check that you have two suitable inputs, enough room for the stands and an appropriate pair option; listen to the recording in mono as well. If I want a more spacious guitar sound, I’m happy to plan for two channels and extra setup time. Around 15% of consumers would make stereo their main priority.

Common buying mistakes

  • Confusing a directional capsule with soundproofing

    A cardioid polar pattern and a change of position can affect the recording, but they’re no substitute for listening to the results in your own booth.

    Try different distances, orientations and stand positions first, before buying another microphone.

  • Planning for the XLR microphone alone

    An XLR condenser microphone needs a suitable recording setup and the right power supply for its model. Without a compatible connection, you won’t be able to record the signal on your computer as intended.

    Check your available inputs and the required phantom power against the specifications for the specific model. If you want to get started directly on your computer, check that USB is listed as a supported connection.

  • Assuming two individual microphones are a matched pair

    According to RØDE, two microphones of the same model aren’t automatically a matched pair. Stereo setups can also run into phase problems.

    Check whether the microphones are sold as a pair, whether two inputs are available and how the recording sounds in mono.

An overview of leading microphone brands

Audio-Technica

Audio-Technica specifically recommends the PRO37 for acoustic guitar and describes it as a compact cardioid condenser microphone.

  • According to Audio-Technica, the model has an XLR connection and requires 11–52 V phantom power.
  • The power supply from your existing recording setup must match the specified voltage range.

AKG

AKG describes the P170 as a small-diaphragm cardioid condenser microphone for acoustic guitar and other instruments.

  • According to AKG, the P170 has a switchable −20-dB pad and an equivalent noise level of 19 dB-A.
  • AKG specifies a 44–52 V power supply. The pad is designed for high sound pressure levels and won’t replace a check of your booth’s acoustics.

RØDE

The NT5 is an XLR small-diaphragm condenser microphone, with a matched-pair version available separately. The NT1 5th Generation offers USB and XLR for single-microphone recording.

  • The two models address different connection and recording needs.
  • A single NT5 isn’t a stereo pair. Manufacturer claims about sound or self-noise don’t constitute an independent comparison between models.

Shure

Shure describes the SM81 as a directional condenser instrument microphone for applications including guitar.

  • According to Shure, the SM81 has a switchable low-frequency roll-off and requires 12–48 V phantom power.
  • A low-frequency roll-off is no substitute for checking your microphone position and booth acoustics.

Recommended products on Joybuy

Recommended products will be available soon.

Frequently asked questions

Where should I position the microphone first in a small booth?

Start by listening to a single-microphone recording aimed towards the 12th fret, then adjust the distance and orientation. For one of its single-microphone techniques, RØDE recommends a distance of around 6–12 inches. Treat this as a starting point, not a fixed rule for every guitar or booth.

Does an XLR condenser microphone need phantom power?

Check the manufacturer’s specifications for the power requirements of your particular model: AKG specifies 44–52 V for the P170, while Audio-Technica specifies 11–52 V for the PRO37. The NT1 5th Generation’s direct USB connection is a different way of connecting.

Is a stereo pair worth it in a small booth?

A stereo pair is an option if you specifically want a more spacious sound and can plan for two channels and the extra setup. Listen in mono as well: RØDE describes the risk of phase issues with spaced pairs and notes that X/Y is less prone to timing differences.

What should I check if my XLR microphone isn’t producing a signal?

With a condenser microphone, first check that the required phantom power is on, then check the XLR cable and input. The power required depends on the specific model.

How do I dispose of an old electric microphone in Germany?

Electrical waste must not go in your household rubbish. The German Environment Agency lists free drop-off at local collection points and take-back options in shops. The specific obligations for retailers depend on the applicable legal requirements.