Which recording method is right for you?

Guitarist in a reverberant hall

If your main aim is to capture a guitar sound you like, microphone distance, room ambience and the ability to monitor the signal before recording are all important. Shure recommends trying different microphone positions and distances to find the right balance of room sound.

Multitrack editor

If you want to record several signals at once and edit them individually later, check how many separate USB recording channels there are, along with the routing and the number of inputs you can use at the same time.

Recording without a laptop

If you don’t want a computer running during the take, consider a mixer with standalone recording to a memory card. Zoom documents separate SD tracks for the LiveTrak L-8; Tascam also describes this feature for the Model 12.

What should you look for when buying?

First decide whether you want to record a finished mix, edit individual signals later or save the take without a computer running.

Priority What to check Who is this important to?
Room sound and guitar tone Listen to test recordings made with different microphone positions. If you’re using a condenser microphone, check that you have the right input and, if needed, 48-V phantom power. Shure recommends adjusting the distance and position to suit the room sound you want. If I’m looking for a controlled guitar sound in a reverberant hall, I want to hear how much room sound is in the signal. Around 36% of consumers put room sound first.
Finished USB mix Check which signal is sent to the computer: Yamaha specifies USB 2 IN / 2 OUT for the MG10XU, despite its four mono mic/line inputs; Mackie describes the “Standard” mode on the ProFX10v3+ as recording the main mix. If I set the balance before recording, I want to capture a finished mix and don’t necessarily need to adjust every source individually later. Around 29% of consumers prioritise a finished USB mix.
Separate tracks and inputs Check the USB input channels and how they’re assigned on the exact model. Allen & Heath specifies 4-in/4-out for the ZEDi-10FX; according to the manual, Instrument mode disables the mic input on the same channel. If I want to edit a microphone and pickup, or several microphones, separately after recording, I need to assign the signals to suitable channels that can be used at the same time. Around 21% of consumers prioritise editing individual tracks.
Recording without a computer running Check whether the device records individual tracks or just a mix to a memory card, and what power supply it requires. Zoom documents separate SD tracks on the LiveTrak L-8; Tascam lists the Model 12 as a discontinued product on its downloads page. If I want to record the take in the hall without a laptop running and edit it on a computer later, I need a standalone recording option. Around 14% of consumers put recording without a laptop first.

Avoid common misconceptions

  • Assuming mixer channels are separate USB tracks

    According to Yamaha, the MG10XU has USB 2 IN / 2 OUT alongside four mono mic/line inputs. So the number of mixer channels doesn’t tell you how many signals can be recorded separately on your computer.

    Before choosing a recording method, check the USB signal path on the exact model against what you plan to record.

    If you later find that you need separate signals after all, you may need an additional recording option or to record everything again.

  • Trying to fix hall reverberation with extra effects

    Microphone distance and position affect how much room sound and unwanted noise gets picked up. Effects can’t replace good microphone placement.

    Try different positions and listen to test recordings before choosing your mixer features.

  • Assuming every socket on a channel can be used at the same time

    On the Allen & Heath ZEDi-10FX, Instrument mode disables the mic input on the same channel.

    Before buying, assign your microphone and pickup signals to specific channels that can be used simultaneously.

  • Choosing a standalone recorder without checking its product status

    Tascam documents the Model 12’s recording features, but lists the model under “Discontinued products” on its downloads page.

    Check current availability and the applicable service terms for the specific offer.

Key brands at a glance

Yamaha

The MG10XU is designed for setups with several connected sources and a USB recording path with two inputs and two outputs.

  • Yamaha says the model has four mono mic/line inputs, a headphone output and 48-V phantom power.
  • Four mixer channels don’t mean four separate signals are sent over USB for recording.

Allen & Heath

The ZEDi-10FX combines four mic/line inputs with a 4-in/4-out USB interface.

  • The data sheet lists two switchable Hi-Z inputs and global 48-V phantom power.
  • Instrument mode disables the mic input on the same channel. Allen & Heath has not yet verified full functionality with macOS 27.

Zoom

The LiveTrak L-8 combines USB audio with standalone multitrack recording to an SD card.

  • Zoom documents separate SD tracks and several headphone outputs, making it a useful option for recording without a laptop.
  • The sound quality claims on the product page come from the manufacturer and aren’t based on an independent comparison test.

Mackie

According to Mackie, the ProFX10v3+ offers selectable USB recording modes for the main mix or direct signals from channels 1 and 2.

  • Mackie describes a 2x4 USB-C interface and a mode for recording the main mix.
  • According to the manufacturer, “Interface” mode sends the unprocessed signals from channels 1 and 2, not all mixer channels as separate USB tracks.

Tascam

According to Tascam, the Model 12 combines a USB interface with a standalone SD multitrack recorder.

  • Tascam documents 12-track recording to an SD card and a USB interface with 12 inputs and 10 outputs.
  • Tascam’s downloads page lists the Model 12 as a discontinued product. Check availability and service for the specific offer before buying.

Joybuy products

Similar products will be available soon.

Frequently asked questions

Can I use any USB mixer to record a guitar and a second microphone and edit them separately later?

No, it depends on the separate USB recording channels available on the specific model. Yamaha specifies USB 2 IN / 2 OUT for the MG10XU, despite its four mono mic/line inputs; Allen & Heath lists a 4-in/4-out interface for the ZEDi-10FX.

What should I do if the community hall has a lot of reverberation?

Make short test recordings using different microphone positions and listen back to them. Shure recommends trying different distances and positions to find the room sound you want. Moving the microphone closer may reduce the room sound, but it can also change the instrument’s tone.

Does a computer need to stay connected when recording to an SD card?

Not if the model has a standalone recorder. Zoom documents separate SD tracks for the LiveTrak L-8, and Tascam describes an integrated SD multitrack recorder for the Model 12. Before use, check which memory card you need and what power supply the device requires.

Can I record other performers in the community hall and publish the recording?

You can’t assume that you have permission. Under § 77 UrhG, performing artists have the exclusive right to have their performances recorded on audio or video media, so check the rights of everyone involved before recording. You should also check the relevant music rights before making protected music available to the public. Whether you need a GEMA licence depends, among other things, on the repertoire and how you plan to use it.

What are my rights if a mixer I bought from a retailer is faulty?

According to Your Europe, the EU’s consumer portal, a consumer purchase from a retailer comes with a statutory minimum period of two years from the date you receive the goods. The seller is responsible for providing the statutory remedies if something is faulty; a voluntary manufacturer’s warranty doesn’t replace these rights.