Which recording setups suit different needs?

Focusing on a single acoustic instrument

If you want to bring one instrument’s sound to the fore, try experimenting with the microphone’s distance and angle. Using a single microphone doesn’t automatically record other voices or instruments onto separate tracks.

Recording a demo with several musicians

If there are other sound sources in the rehearsal room, the microphone’s direction and distance, along with the number of available inputs, will affect your recording setup. Consider whether you’ll want to edit individual sources separately later.

Capturing the whole rehearsal

To record the group performance as a whole, you could use built-in stereo microphones or a stereo pair. Consider whether you want to capture the sound of the room and whether you can manage without separate tracks.

What should you look for when buying?

First, decide whether you want to focus on a single instrument, several separate sources or the rehearsal as a whole. Then check that the connections and microphone inputs are compatible with your recording equipment.

What matters What to check before buying Who is this important to?
Instrument detail Check whether the specific model is suitable for acoustic instruments; compare microphone distance and angle with short test recordings. If I want to bring a single acoustic instrument to the fore, I’d like to find the right place in the mix by experimenting. Around 33% of consumers put this focused instrument sound first.
Other musicians and room sound Check the microphone’s polar pattern and angle in relation to other sources; make a test recording from the intended position. If several instruments are playing in the room, I want to record the source I’m focusing on without assuming that other sounds will disappear. Around 27% of consumers prioritise controlling bleed and room sound.
Connection and recording setup Check the full model name, USB or XLR connection, whether phantom power is required and how many inputs are available. If I want to record a single source on my computer or through an interface, the connection needs to work with the equipment I already have. Around 20% of consumers prioritise a straightforward signal path.
Recording the group in stereo Check whether a stereo pair with two microphone inputs or a recorder with built-in stereo microphones suits the recording you have in mind. If I want to capture the whole rehearsal, I’d like to record in stereo while allowing for possible room sound. Around 20% of consumers prioritise recording the group as a whole.

Common buying mistakes

  • Assuming the AT2020 and AT2020USB-X have the same connection

    These similarly named Audio-Technica models have different connections. The AT2020 uses XLR, while the AT2020USB-X is designed for USB recording.

    Check the full model name and intended signal path before buying.

  • Assuming 32-bit float prevents every recording problem

    RØDE states that 32-bit float is available on the NT1 5th Generation via USB, not through its analogue XLR output. Exceeding the maximum sound pressure level can also cause audible distortion.

    Check the connection and software settings with a short test recording, and pay attention to room sound and microphone position too.

  • Planning to use a stereo pair without two suitable microphone inputs

    A stereo pair needs to be recorded through two compatible microphone inputs.

    Count the inputs you can use at the same time, and check the connections and setup before choosing a pair.

  • Confusing a stereo recording of the whole group with separate tracks for every musician

    The Zoom H4essential’s built-in X/Y microphones record the rehearsal as a whole, but they don’t give each person their own close-miked track.

    Decide in advance whether you want to capture the group performance or edit individual sources separately later.

Key brands to consider

Shure

The PGA81 is designed for focused recording of acoustic instruments; the SM57 is a dynamic alternative for instruments in the rehearsal room.

  • Shure says the PGA81 requires phantom power. The version described comes with a cable, clip and pouch.
  • Shure describes the SM57 as robust and designed to handle high instrument levels.
  • These features don’t prove that the SM57 is generally better for quiet acoustic demos.

RØDE

The NT1 5th Generation offers USB or XLR connectivity; the M5 stereo pair is an option for acoustic sources.

  • RØDE says that 32-bit float on the NT1 5th Generation is limited to USB operation.
  • According to RØDE, XLR operation of the NT1 5th Generation requires 48 V phantom power.
  • A stereo pair needs a suitable recording setup with inputs for two microphones.

Audio-Technica

The AT2020 is an XLR model; the AT2020USB-X is designed for recording a single source directly to a computer.

  • Audio-Technica specifies USB-C and direct headphone monitoring for the AT2020USB-X.
  • The AT2020 without the USB suffix uses a different signal path. Check the full model name before ordering.

LEWITT

The LCT 040 MATCH is available as a single small-diaphragm microphone or as a stereo pair for acoustic instruments.

  • LEWITT describes the stereo pair as matched and designed for recording acoustic guitar and drums.
  • A stereo recording setup needs two suitable microphone inputs. The single microphone and stereo pair are different options.

Zoom

The H4essential is a portable recorder with built-in X/Y microphones and extra inputs for external microphones.

  • According to Zoom, the device offers four recording tracks and two external XLR/TRS inputs.
  • The built-in microphones aren’t a substitute for close-miking each person individually; four tracks doesn’t mean four external microphone inputs.

Joybuy products for recording a single source

Joybuy picks for recording a single source over USB or XLR.

FIFINE K688CTW dynamic XLR/USB microphone with boom arm, white

FIFINE K688CTW, dynamic XLR/USB microphone with boom arm, white

This could suit you if you want to record a single source on your computer or via XLR and position the microphone at your recording spot; check that this setup works for your instrument and space.

  • Dynamic microphone with USB-C and XLR connections.
  • Includes a headphone socket, mute button, volume control and adjustable boom arm.
  • According to the product description, an XLR cable is not included.
View at Joybuy

Frequently asked questions

Where should I start when positioning a microphone in front of an acoustic guitar?

RØDE suggests starting with a single microphone aimed at the 12th fret, around 15–30 cm away. Then compare short recordings from your usual position; this isn’t a one-size-fits-all setting for every rehearsal room.

Can I connect any condenser microphone directly to my laptop?

No, the connection needs to be compatible with your recording device. Audio-Technica says the AT2020USB-X uses USB-C, while the AT2020 requires an XLR recording setup with power. The NT1 5th Generation offers both connections, but XLR operation requires 48 V phantom power.

Do four tracks on the Zoom H4essential mean it has four external microphone inputs?

No. Zoom lists four recording tracks, built-in X/Y microphones and two external XLR/TRS inputs. Plan for external microphones based on the inputs actually available.

What are the rules on statutory rights and manufacturer warranties in Germany?

Your statutory rights if a product is faulty are separate from a voluntary manufacturer’s warranty. The Verbraucherzentrale states that the standard retailer’s statutory liability lasts for two years from purchase or delivery; check warranty terms separately.

Can I record other people talking during a rehearsal without asking them?

Not as a blanket rule: in 2025, the Federal Court of Justice referred to § 201 StGB, which protects spoken words that are not intended for the public from unauthorised recording. If conversations could be picked up, check with everyone beforehand. This doesn’t answer every question about recording or publishing a musical performance.