Who would benefit from their own large-format printer?

Students who print A1 plans regularly

If you want to print your own plans regularly, check that the print width, media feed and specific file are all compatible. HP, Canon and Epson offer 24-inch models for large-format plans.

Students short on space

When space is tight, consider not only the printer’s dimensions but also access to the paper feed and room for finished plans. Canon lists the imagePROGRAF TC-21’s dimensions as 968 × 533 × 245 mm, but this doesn’t account for the full working area you’ll need.

Students who print plans infrequently or need larger formats

If you print infrequently or need a larger format, a large-format print service could be an alternative to keeping a printer set up permanently. The University of Stuttgart lists print widths of 36 to 60 inches for its service; this example doesn’t indicate what’s available at your university. DIN gives the dimensions of A0 as 841 × 1.189 mm.

What should you look for when choosing one?

First check the plan size you need, then the space required in practice, and finally whether a printer of your own or a large-format print service better suits how often you print.

What you need What to check Who is this especially important for?
The right plan size Check the required submission format and the roll and sheet sizes supported; take the specific file into account too. If I need to submit a plan up to A1, I want to be sure the print width, paper path and file are compatible. Around 33% of consumers put the right plan size first.
Space and paper handling Compare the printer’s dimensions with the intended location, and allow room for loading paper and setting plans down. If there’s very little free space in my student accommodation, I need room not only for the printer but also to change the paper and store finished prints. Around 27% of consumers prioritise space and paper handling.
Ink and paper requirements Check which ink and paper are right for your print volume; for the HP DesignJet T230, also consider the restrictions on cartridge chips. If I print my own plans, I want to know which consumables I’ll need for regular use. Around 27% of consumers pay particular attention to ink and paper.
Occasional jobs and print services Check in advance whether a local service accepts the format you need and when your job will be ready. If I only print large-format plans occasionally, I don’t want to have to make room for a printer permanently, and I need a service I can get to easily. Around 13% of consumers prioritise occasional jobs and access to a print service.

Common purchasing misconceptions

  • 24 inches doesn’t mean every plan size will fit

    A printer with a maximum print width of 610 mm won’t handle A0: DIN gives the width of A0 as 841 mm. For other formats, the media feed and the specific print file can also matter.

    Check the required output format and compare it with the printer’s print width and intended media path before you buy.

    If a plan won’t fit the printer, you’ll need another way to print that job.

  • Considering the printer alone instead of the whole printing process

    Your choice also depends on how often you print, as well as the ink and paper you’ll need. HP says dynamic security measures on the HP DesignJet T230 may block cartridges with non-HP chips.

    Before buying, check which consumables are suitable for your print volume and the model you want. Only compare a large-format print service against the specific terms it offers for your job.

  • Confusing compact dimensions with the total space required

    As well as room for the printer itself, you’ll need space to change the paper, access the controls and store finished plans.

    Measure the intended space and allow room to access the roll or sheet feed, as well as enough space to set plans down.

Key brands at a glance

HP

The DesignJet T200 range includes compact plotters for CAD drawings. The HP DesignJet T230 is a 24-inch model for A1 output.

  • HP lists both sheet and roll feeding, as well as an automatic cutter, for the T230.
  • HP notes that dynamic security measures may block cartridges with non-HP chips. So check that the consumables are suitable for this specific model.

Canon

Canon describes the imagePROGRAF TC-21 as a 24-inch desktop printer designed, among other things, for CAD printing in small spaces.

  • For this specific model, Canon lists both roll and sheet feeding, as well as four pigment inks.
  • The listed dimensions of 968 × 533 × 245 mm cover the printer itself, but don’t automatically include the space needed for paper feeding and finished plans.

Epson

Epson describes the SureColor SC-T2100 as a 24-inch model for drawings and plans, including for students short on space.

  • Epson lists roll printing, a sheet feeder for sizes up to A3 and an optional stand.
  • For large-format sheets, the roll feed is important: the sheet feeder on this model is specified for sheets up to A3.

Printers for architectural plans on Joybuy

Suitable products coming soon.

Frequently asked questions

Will a 24-inch plotter print every architectural plan?

No. First check the required submission format: HP lists the DesignJet T230’s maximum print width as 610 mm, while DIN gives the dimensions of A0 as 841 × 1.189 mm. Even for A1, check the supported media and the specific print file.

Can I print an A1 plan on the Epson SureColor SC-T2100 using the sheet feeder?

Don’t use the sheet feeder for a large-format print: Epson specifies it for sheets up to A3 and the roll feed for rolls up to 24 inches. Before placing your order, check that the roll and print file are suitable for the format you need.

What rights do I have if my printer is faulty?

When you buy from a business seller, you generally have a statutory right to a remedy from the seller for at least two years from the date you receive the goods. The EU’s Your Europe website distinguishes this right from a voluntary manufacturer’s guarantee. The EU consumer rules mentioned here don’t apply in the same way to purchases from private individuals.

Can I put an old plotter in household waste?

No. The German Environment Agency explains that old electrical equipment must be collected separately; you can, for example, drop it off free of charge at a recycling centre. Check which return options apply to your device and retailer.