Which printing option is right for you?

Designers with limited desk space

If you revise plans at your desk, allow for space not only for the printer itself but also for the paper feed and finished prints. Canon lists the imagePROGRAF TC-21’s dimensions as 968 × 533 × 245 mm; these don’t show how much space you’ll need while printing.

Designers who need to submit A0 plans

If a plan needs to be printed at full size on a single sheet of A0 paper, print width is crucial. DIN defines A0 as 841 × 1189 mm, so check that the specific printer supports this size through the intended paper feed.

Occasional plan printers

If you only print large plans occasionally, weigh the convenience of having a printer on hand against the space it takes up, the initial cost and ongoing supplies. A print service could be a good option if its access, file requirements and delivery terms suit your needs.

What should you consider when choosing?

24-inch desktop plotter for plans up to A1

A good fit if: You regularly print A1 plans yourself and have room for a suitable paper feed at your workstation.

The trade-off: The print width isn’t enough for an A0 sheet in one piece. According to Epson, the SC-T2100’s automatic sheet feeder is limited to A3.

36-inch printer for A0 plans in one piece

A good fit if: You regularly need full-size A0 prints and have a suitable place to set up the printer. HP lists A0 printing via the manual feed for the DesignJet T650 36-inch.

The trade-off: A wider print capability won’t automatically solve the problem of limited desk space.

Print service for occasional jobs

A good fit if: You only need large final prints occasionally and a suitable provider’s terms work for you.

The trade-off: You won’t need to keep space free for a printer, but you’ll need to factor in delivery times and access if plans change at short notice.

What matters What to look for when buying Who should pay particular attention
Space and paper handling Allow for the printer itself, plus access to the paper feed and output; the printer’s dimensions alone aren’t enough. If desk space is tight, I need room for paper and finished plans as well as the printer. Around 33% of consumers put available space first.
Printing a plan in one piece Check the largest size you need separately from the limits of roll and sheet feeds. DIN defines A0 as 841 × 1189 mm. If I need to submit A0 plans at full size without splitting them, the printer’s width must support that format. Around 25% of consumers make printing A0 in one piece their top priority.
Print frequency and ongoing costs Factor in how often you print, along with paper, ink and any maintenance. Check the service terms if you’re considering a print service. If I only need large prints occasionally, I want to weigh the space taken up by my own printer against the terms of using an external service. Occasional use is the deciding factor for around 25% of consumers.
Paper feed and CAD workflow Check sheet and roll sizes, the feed you need, and the drivers and consumables compatible with the specific model. If I print plans regularly, I want to choose the right paper feed rather than relying on the maximum format listed. Around 17% of consumers prioritise a smooth plan-printing workflow.

Common buying mistakes

  • Assuming “24 inches” means A1 sheets can be fed individually

    The stated roll width doesn’t automatically tell you which sheet sizes the printer can feed individually. According to the manufacturer, the Epson SC-T2100’s automatic sheet feeder only supports sizes up to A3.

    For each size you need, check whether it can be printed using the roll feed or the sheet feed.

  • Choosing a compact 24-inch printer when you need A0

    A 24-inch printer with a print width of 610 mm can’t print an A0 sheet in one piece. DIN lists the shorter side as 841 mm.

    Before choosing, decide whether you really need A0 at full size and in one piece.

  • Comparing only the printer’s dimensions and purchase price

    Your printing workflow also depends on paper feed, space for finished plans and the supply of consumables. HP describes dynamic security measures for cartridge chips on the DesignJet T230.

    Check the space you’ll need for the specific model, along with the terms for compatible consumables.

Key brands at a glance

Canon

The imagePROGRAF TC range includes the TC-21, a 24-inch desktop plotter for roll and sheet printing.

  • Canon lists the TC-21’s dimensions as 968 × 533 × 245 mm and says it has four 70 ml pigment ink tanks.
  • The printer’s dimensions don’t show how much extra space you’ll need for paper feed and prints at your workstation.

HP

The 24-inch DesignJet T230 and 36-inch T650 cater for different print-size requirements.

  • HP lists sheet and roll feeds up to A1 for the T230; the 36-inch T650 can print A0 using the manual feed.
  • HP notes that the models mentioned use dynamic security measures for cartridge chips. The T650’s wider print capability doesn’t automatically mean it will fit your space.

Epson

The 24-inch SureColor SC-T2100 and 36-inch SC-T5100N are options for technical drawings.

  • Epson lists an automatic nozzle check for both models.
  • The SC-T2100’s automatic sheet feeder is limited to A3; the stand for the SC-T5100N is optional. Claims about preventing misprints come from the manufacturer.

Suitable products on Joybuy

Related products coming soon.

Frequently asked questions

Can I feed an A1 plan as a single sheet into any 24-inch plotter?

No, it depends on the model and paper feed. Epson lists rolls up to 24 inches for the SC-T2100, but its automatic sheet feeder only supports sheets up to A3. Check that the specific printer can feed the size you need.

What should I check before setting up a printer on a small desk?

Measure the available space and allow extra room to access the paper feed and handle finished plans. An optional stand can affect where you set up the printer, so don’t assume it’s available just from the model name.

Which ongoing costs and service terms should I consider?

Factor in paper, compatible ink and any maintenance, then compare these costs with the terms of a specific print service. HP describes restrictions relating to cartridge chips on the DesignJet T230, so check the consumables available for the particular variant too.

How should I dispose of an old plotter in Germany?

According to the German Environment Agency, electrical waste must not go in household rubbish; it should be collected separately. Options include local collection points and, subject to the applicable conditions, returning it to a retailer. Check in advance whether your chosen collection point will accept the printer.