Use studio monitors when speaker playback is compatible with working in a shared office and you can position a stereo pair symmetrically to suit your listening distance and signal path. For longer or disruptive listening sessions, headphones or a separate listening room are considerate alternatives. Compact speakers and room correction won’t stop sound carrying across the office or solve positioning problems.
Who this guide is for
Archive reviewers in a shared office
You need to check recordings on speakers from time to time, while taking other people working in the same room into account. The German Federal Institute for Occupational Safety and Health treats noise as a workplace issue.
Restoration editor with a dedicated listening position
You compare different versions and assess audible differences from a consistently set up stereo listening position. The International Association of Sound and Audiovisual Archives highlights the importance of comparing the signal quality of available copies.
Editor with a small desk
You need to fit a stereo system into your existing computer or interface setup, both physically and electrically. Information from ADAM Audio, Kali Audio and Neumann can help you check connections, dimensions and what’s needed for room correction.
What to consider when choosing
When checking restored archive recordings, it’s important to compare the signal quality of available versions. The International Association of Sound and Audiovisual Archives describes this comparison as part of the selection process.
| Criteria |
What to check before buying |
Who it matters most to |
| Consideration for others |
Check when speaker playback is compatible with working in the room, and keep headphones or a separate listening space as an alternative. |
When others are concentrating in the same office, I want to use speakers only at suitable times. Around 36% of consumers put consideration for other people in the workplace first. |
| Comparing versions |
Compare versions from the same listening position and with playback levels under control. When looking at frequency figures, also take the stated dB tolerance into account. |
When assessing different archive versions, I want to compare audible differences without confusing them with changes in speaker positioning. Around 29% of consumers prioritise comparing versions. |
| Space and positioning |
Measure the available space and listening distance. Aim to position both speakers symmetrically and at the same height. |
If my desk has limited space, I still need to be able to set up a suitable stereo listening position. Around 21% of consumers prioritise positioning. |
| Signal path and what’s included |
Check that the inputs and digital playback are compatible with your computer or interface and the files you need to play. Also check the number of speakers, cables and, where relevant, whether a measurement microphone is included. |
Before buying, I want to know whether the system will connect to my setup and whether it really includes a complete stereo set. Around 14% of consumers prioritise integration and what’s included. |
Studio monitor buying pitfalls
-
Confusing a single monitor with a stereo pair
Single-monitor and pair versions are not the same. IK Multimedia, for example, states that the ARC measurement microphone is included with the pair version of the iLoud Micro Monitor Pro.
Before ordering, check the full variant name and what’s in the box.
Depending on the version you choose, you may need to buy a second monitor, suitable cables or measurement accessories separately.
-
Comparing frequency figures without checking their reference
Neumann specifies 44 Hz at ±3 dB for the KH 120 II, while ADAM Audio specifies 45 Hz at −6 dB for the T5V. Because the tolerances differ, these figures don’t provide a direct comparison of bass performance.
Compare frequency limits only alongside the corresponding dB figure, and assess playback from the listening position you intend to use.
-
Assuming USB-C will play every archive file unchanged
ADAM Audio specifies an internal sampling rate of 48 kHz and 16 bit for the D3V’s USB signal path. This means that files at, for example, 96 or 192 kHz won’t play in their original format through this connection.
Decide whether you simply need to compare versions by listening, or whether certain files must be played unchanged through your monitoring setup.
If you need a different signal path, you may also need a suitable interface and additional cables.
-
Relying on room correction instead of being considerate
Room correction and speaker positioning affect playback at the listening position; they won’t stop colleagues hearing sound from the speakers.
Arrange speaker checks around how the office is being used, and have a personal listening option ready for other times.
Key brands at a glance
ADAM Audio
The D3V is designed for compact desktop setups; the T5V is a larger analogue nearfield monitor.
- ADAM Audio lists USB-C and two balanced TRS connections for the D3V. According to the manufacturer, its internal signal path operates at 48 kHz and 16 bit in USB mode.
- When positioning the T5V, bear in mind that its bass reflex port is on the rear. ADAM Audio specifies 45 Hz at −6 dB; this figure can’t be compared with other frequency specifications unless they use the same measurement basis.
Genelec
The 8020D is a compact option for a dedicated nearfield listening position.
- Genelec lists the 8020D’s dimensions as 242 × 148 × 142 mm and specifies a frequency response from 56 Hz at −6 dB.
- Genelec emphasises symmetrical positioning and the effect of the room. The manufacturer’s specifications aren’t an independent listening assessment.
Kali Audio
The LP-UNF is a desktop stereo system with digital and analogue inputs, plus positioning settings.
- Kali Audio lists USB-C at 24 bit and 48 kHz, a balanced TRS input, and settings for desktop and wall placement.
- These settings don’t prove that the system will sound neutral in every office listening space without being checked.
Neumann
The KH 120 II is designed for a dedicated nearfield listening position; the MA 1 is a compatible room correction system.
- Neumann recommends a listening distance of 1–2 m for the KH 120 II and specifies 44 Hz–21 kHz at ±3 dB.
- Using MA 1 requires, among other things, a measurement microphone and a suitable audio interface. Don’t assume these components are included.
IK Multimedia
The iLoud Micro Monitor Pro is available as a single monitor and in a separate pair version.
- According to IK Multimedia, the ARC measurement microphone is included with the pair version of the iLoud Micro Monitor Pro.
- Take care not to confuse the pair version with the single-monitor version or the original iLoud Micro Monitor.
Suitable products at Joybuy
Suitable products coming soon.
Frequently asked questions
How should you position two monitors for stereo checks?
Genelec recommends angling both speakers towards the listening position and, ideally, forming an equilateral triangle with it, with an angle of 60°. Positioning them at the same height and, as far as possible, symmetrically in relation to nearby walls helps minimise differences between the left and right speakers.
Does room correction replace proper positioning?
No. Genelec describes positioning and room reflections as factors that affect sound. If you want to use Neumann MA 1, also check the documented requirements, including supported speakers, a measurement microphone and a suitable audio interface.
Can you listen to high-resolution archive files unchanged through the D3V’s USB-C input?
Not in every case: ADAM Audio specifies an internal rate of 48 kHz and 16 bit for the D3V in USB mode, so files at, for example, 96 or 192 kHz won’t play in their original format through this connection. If this matters for your checks, plan your playback signal path accordingly.
What should you check before buying a system for stereo checks?
Check that your chosen version includes two suitable speakers, and that the connections, cables and, where relevant, measurement microphone are right for your setup. For the iLoud Micro Monitor Pro, IK Multimedia offers single-monitor and pair versions; according to the manufacturer, the ARC measurement microphone is included with the pair version.