Who would benefit from an audio interface?

Editing existing guitar tracks

If you mainly edit existing tracks, easy-to-reach headphone or speaker monitoring and well-placed controls matter most. You don’t necessarily need extra inputs for this.

Occasional single-track recording

If you also want to record an acoustic guitar, check whether you’ll be connecting a microphone or a pickup. Each requires a different type of input.

Recording with two microphones

If you want to record two microphones at the same time on separate tracks, you’ll need two microphone preamps that can be used simultaneously – not just two inputs in total.

What should you look for when buying?

First, consider whether you’ll be recording new sources as well as editing. Then check that the number of microphones you need, the monitoring controls and the space available for the interface and cables all work for you.

For anyone editing acoustic guitar tracks at a small desk, the main buying priorities are monitoring, the recording setup and the space available.

Priority What to check before buying Who will find this most important
Monitoring and editing Check the headphone socket and connector type, easily reached level controls and, if needed, speaker outputs. If I’m editing existing tracks, I want to monitor through headphones and, where needed, speakers comfortably, with the level controls close to hand. Around 33% of consumers prioritise monitoring and editing.
Recording a new guitar track First decide whether you need a microphone input or a suitable instrument input for a pickup. If you’re using a condenser microphone, check whether it needs phantom power. If I want to record a single new guitar track, the input needs to suit my microphone or pickup. Around 25% of consumers prioritise single-track recording.
Using two microphones Check for two microphone preamps that can be used simultaneously, and confirm that the required phantom power is available on the relevant channels. If I want to record two microphones at the same time on separate tracks, I look for two proper microphone inputs. Around 17% of consumers prioritise this type of recording.
Desk space and computer connection Compare the dimensions of the unit and allow room for connectors. Check which USB connection you need and the system requirements for the specific model. If the interface, cables and controls need to fit on my small desk and connect to my computer, the overall space it takes up matters. Around 25% of consumers focus on space and connectivity.

Common assumptions to avoid

  • Assuming ‘two inputs’ means ‘two microphone inputs’

    On the Focusrite Scarlett Solo 4th Gen, one input is for a microphone and the other is for line or instrument signals. So the total number of inputs doesn’t tell you how many microphones you can connect at the same time.

    Count the XLR microphone inputs you need separately from the instrument and line inputs.

  • Comparing only the unit’s dimensions with the available desk space

    Connected plugs and cables need extra room, and you’ll also need to be able to reach the controls.

    Before buying, plan how you’ll route the headphone, microphone, speaker and USB cables.

  • Confusing direct monitoring with software effects

    The direct monitoring path described by Focusrite bypasses the computer. This means you hear the input signal without effects that would be applied through software.

    Decide whether you want to hear the direct input signal or the signal processed by software while recording.

Key brands at a glance

Focusrite

The Scarlett Solo 4th Gen gives you one microphone input and one instrument input; choose the Scarlett 2i2 4th Gen if you need two microphones.

  • According to the Focusrite User Guides, the Solo has separate headphone and main output controls, and a footprint of 143 × 96 mm.
  • Only one of the Solo’s inputs is a microphone input. The 2i2 has two microphone inputs and measures 180 × 117 mm; its front-mounted jack sockets share their respective channels with the XLR sockets.

Audient

The iD4 MKII is a compact option with one microphone input and a separate instrument input.

  • Audient’s specifications list one microphone preamp and one instrument input.
  • This doesn’t mean it has two microphone inputs. Its stated USB power requirement of 0.9 A at 5 V needs to be supported by your computer connection; Audient specifies at least one USB 3.0 port.

MOTU

The M2 is worth considering if you need two microphone inputs and easy-to-read level displays.

  • MOTU lists two Mic/Line/Hi-Z combo sockets, individual 48 V switches, a colour display, and separate monitor and headphone controls.
  • According to MOTU, the unit measures 19.05 × 10.8 cm; remember to allow extra room for plugs and cables.

Steinberg

The UR22C has documented connections for two microphones and an additional Hi-Z instrument input.

  • Steinberg lists two D-PRE microphone preamps, a Hi-Z input, Monitor Mix and MIDI In/Out.
  • The Hi-Z input isn’t a third microphone channel that can be used independently. Streaming features aren’t a reason to buy if you’re only editing tracks.

Arturia

The MiniFuse 2 has two combo inputs and a monitoring mix that you can adjust on the unit.

  • Arturia lists two inputs, an instrument switch, 48 V and a control for mixing the input signal with computer playback.
  • According to Arturia, the single 48 V switch activates both XLR inputs at the same time. Bear this in mind if you’re using different microphones.

Suitable products on Joybuy

Suitable products coming soon.

Frequently asked questions

Do I need 48 V phantom power for every acoustic guitar track?

No. 48 V is relevant if the microphone you’re using needs phantom power; you don’t need it for tracks that have already been recorded. Check the requirements of your microphone and the input you’ll be using.

Does direct monitoring remove the delay when listening to software effects?

No, not automatically. With the direct monitoring described by Focusrite, you hear the input signal without it passing through the computer, so you won’t hear effects applied there. If you want to hear software effects, you’ll need to use software monitoring.

What should I look for in an audio interface sold in Germany?

The Bundesnetzagentur reminds retailers that products must have the correct CE marking and device identification, as well as German-language instructions for non-commercial users. Check these details on the specific device and in its accompanying documents; the general requirement doesn’t confirm that an individual listing is correctly labelled.