Which interface is right for you?

Listening to archives at a bright desk

If you mainly check finished restorations, look for suitable monitoring connections, easy-to-reach controls and a level display you can read from your particular spot by the window. MOTU lists input and output level displays for the M2, but this doesn’t confirm that they’ll be easy to read in bright window light.

Archivists who occasionally transfer stereo recordings

If you also transfer analogue stereo sources as well as checking finished files, two suitable inputs and the correct stereo setting for direct monitoring are important. Focusrite describes these connection and monitoring options for the 4th Generation Scarlett 2i2.

Editors using multiple monitoring setups

If you compare restorations on several pairs of speakers or need a separate headphone mix, check the output configuration and routing options. Audient documents these options for the iD14 MKII; they’re set up in the iD Mixer.

What should you look for when buying?

First, consider how you’ll listen to finished files and check levels in your intended workspace. Only add input or routing requirements if they’re needed for other tasks you actually do.

Consideration What to check before buying Who is this important to?
Using the interface in bright window light Check the position, viewing angle and reflections; consider how easy it is to reach the controls and whether you can view levels in the software you use. When I’m working by a bright window, I want to check levels and reach the controls without having to keep moving things around. Around 36 % of consumers put ease of use in this spot first.
Controlled monitoring Check the headphone and speaker connections, any adapters you’ll need and the volume control. If you need to measure programme loudness or True Peak, plan to use suitable metering software. When checking finished files, I want to listen through my existing headphones or speakers with the volume control within easy reach. Around 29 % of consumers prioritise this kind of controlled playback.
Stereo transfers Check that there are two line inputs you can use at the same time, the right cables and a stereo setting for direct monitoring. If I occasionally transfer an analogue stereo source, I need suitable inputs for both channels and proper stereo monitoring. Around 21 % of consumers put transferring recordings first.
Switching between monitoring setups Check the number of speaker pairs you need, the output configuration, routing setup and how the volume controls work. If I want to compare a restoration on several pairs of speakers or through a separate headphone output, the routing needs to suit my setup. Around 14 % of consumers prioritise switching between monitoring setups.

Avoid common buying mistakes

  • Assuming a colour display will be easy to read in sunlight

    A display with level meters doesn’t prove that it’ll be easy to read next to a bright window. The M2’s displays are documented, but their readability at your workstation isn’t.

    Check the intended viewing angle and any reflections at your workspace. Keep a software level meter as an alternative.

  • Buying as many inputs as possible just to play back finished files

    Inputs and direct monitoring are mainly useful for connected sources. When checking files that have already been restored, the outputs and how easy they are to use matter more.

    First, note the connections on your headphones and speakers. Only plan for extra inputs if you’ll actually be transferring recordings.

  • Assuming separate headphone routing will have a volume control

    Audient notes that DAW thru bypasses the volume control for the relevant output on the iD14 MKII.

    Check your routing before listening and start at a low level. To have a separate mix with adjustable volume, you’ll need to set up the appropriate Cue assignment.

Key brands at a glance

MOTU

The M2 is worth considering if you want to check input and output levels directly on the device.

  • MOTU lists a colour LCD with level meters, as well as separate monitor and headphone volume controls.
  • The display features don’t confirm that the meters will be easy to read in direct window light.

Focusrite

The 4th Generation Scarlett 2i2 is worth considering if you want to connect an analogue stereo source as well as play back files.

  • Focusrite’s guide describes two line inputs and direct monitoring with mono and stereo modes.
  • For playback of finished files alone, the extra inputs aren’t an advantage in themselves; there’s no confirmation that the displays are easy to read in bright window light.

Audient

The iD14 MKII is worth considering for a workspace with two pairs of speakers or a dedicated headphone mix.

  • Audient documents alternative speaker outputs and the option to assign a Cue mix to the headphones.
  • You’ll need to set up the routing. Audient says DAW thru bypasses the volume control for the relevant output.

RME

The Babyface Pro FS is worth considering if you need digital ADAT or S/PDIF connections and flexible routing alongside archive monitoring.

  • RME documents these digital interfaces and its TotalMix routing software.
  • You won’t necessarily need all these features just to play back finished files; the connections must suit your existing setup.

Audio interfaces at Joybuy

Related products coming soon.

Frequently asked questions

Do I need to switch on direct monitoring to check finished archive files?

No. Direct monitoring routes an incoming signal straight to the outputs, so it’s mainly useful when recording or transferring audio. To listen to a file that’s already been restored, play it back in your software.

How do I connect an analogue stereo source to the 4th Generation Scarlett 2i2?

Focusrite describes using a line connection for each channel, in inputs 1 and 2; leave the instrument setting off when using a line source. If you’re monitoring the input signal directly, select stereo mode for Direct Monitor when using a stereo source.

Can the interface’s level meter replace a loudness check?

No, not in every case. The EBU distinguishes between programme loudness and Maximum True Peak; you’ll need metering functions for these values to carry out this kind of technical check. EBU R 128 is a recommendation for the production and distribution context described, not a general target level for private archive files.

Who should I contact if a product bought as a consumer in Germany is faulty?

The seller, not automatically the manufacturer, is responsible for the statutory warranty. Verbraucherzentrale generally gives a period of two years from delivery for faults that were present at the time of delivery; a voluntary guarantee is separate. The additional rules that apply and the remedies available depend on the purchase date and the individual case.

What details should I check when buying an interface offered for the German market?

The Bundesnetzagentur lists the CE marking, product identification, manufacturer details, German-language instructions and declaration of conformity among the criteria it checks when monitoring the market. These criteria don’t confirm that a particular listing complies; check the details for the specific device being offered.