Who is this guide for?

Archive listeners short on socket outlets

You check finished restorations on your computer and only want to connect extra hardware if you’re missing the right connections or controls. Focusrite, MOTU and Audient specify USB power for the models mentioned, although their requirements vary.

Reviewers using multiple monitoring paths

You switch between headphones and speakers, or listen to files with others. Audient and Solid State Logic describe different output and headphone control options on certain models.

Archive users who occasionally transfer analogue audio

You listen to restored files and would also like to connect an analogue stereo source from time to time. Focusrite and MOTU list inputs on the relevant models; check they’re suitable for your source and cabling.

What should you look for when socket outlets are limited?

If your existing monitoring setup works, you don’t automatically need an additional interface. If you’re missing connections or controls, base your choice on your actual power and signal-routing requirements.

Use your computer’s existing output

Best if: you’re checking finished files and your headphones or speakers and volume controls are already working.

Bear in mind: this won’t give you additional analogue inputs or monitoring controls on an interface.

Compact USB-powered interface

Best if: you want to connect headphones and, if needed, a pair of speakers without setting aside a separate socket outlet for the interface.

Bear in mind: USB power will only be enough if your computer port can meet the model’s power requirements.

Interface with additional monitoring paths

Best if: you genuinely need multiple outputs or independently controlled headphone paths for group listening checks.

Bear in mind: extra outputs are only useful if their signal routing suits your workflow; check the model’s power requirements too.

Interface for transferring analogue stereo audio

Best if: you’d occasionally like to digitise an analogue stereo source as well as play back files, and need suitable line inputs.

Bear in mind: extra inputs and cables aren’t necessary just to listen to finished files.

What you need What to look for Who is this important to?
Power without an additional socket outlet Compare the model’s exact USB power requirements with your computer’s port type and available power. If I don’t want to add another power adapter, I first check whether my computer port can power the interface. Around 31% of consumers prioritise power without an additional socket outlet.
Headphones and speakers Check the connector type, separate volume controls, automatic muting and independently assignable outputs. If I want to switch between headphones and speakers while listening, or use both for a shared check, I look closely at the specific controls and signal routing. Around 31% of consumers say monitoring controls are their main priority.
Checking restored files Assess the saved file through the intended playback path; an interface’s level meter doesn’t replace checking the file. If I want to make sure the saved restoration meets my checking requirements, I inspect the file itself and only use software measurements when they’re needed for its intended use. Around 23% of consumers make file checking their main priority.
Transferring analogue stereo audio Check how many line inputs can be used at the same time, what type they are, and whether the cables, stereo routing and subsequent file workflow are suitable. If I want to transfer an analogue stereo source as well as listen to finished files, I need suitable inputs and want to check the saved recording afterwards. Around 15% of consumers make additional stereo transfers their main priority.

What mistakes should you avoid?

  • Assuming USB-C guarantees operation without a power adapter

    A compatible connector doesn’t prove that the port can supply enough power for every interface and headphone load.

    Compare the model’s exact power requirements with the output of the computer port you plan to use. Focusrite warns that the fourth-generation Scarlett 2i2 may cut out if a USB port doesn’t supply enough power.

  • Confusing extra output sockets with independent monitoring paths

    According to the manufacturer, the RCA outputs on the MOTU M2 mirror the other outputs. On the Audient EVO 4, the speaker outputs are muted when you plug in headphones.

    Check the signal routing and controls on the specific model rather than comparing the number of sockets alone.

  • Relying on a hardware level meter to check the entire file

    A meter in the signal path doesn’t confirm that the saved archive file is error-free or that its loudness is suitable for every purpose.

    Listen to the saved file and use software-based checks if they’re part of your archive or delivery requirements.

    Thorough checking takes extra time for listening and, where necessary, checking the file in software.

Which brands are worth considering?

Focusrite

According to Focusrite, the fourth-generation Scarlett 2i2 is designed for a pair of monitors and headphones, with two analogue input channels available if needed.

  • Focusrite specifies separate level controls and 900 mA at the USB data and power port.
  • Focusrite warns that some computer USB ports may not supply enough power when headphone demands are high. These details apply to the fourth generation.

MOTU

MOTU says the M2 is USB-powered and has separate controls for monitor and headphone levels.

  • MOTU lists level meters, balanced TRS outputs and additional RCA outputs.
  • The manufacturer says the RCA outputs mirror the other outputs, so they don’t provide an independent second monitoring mix.

Audient

The EVO 4 is worth considering for a single listening position; the iD14 MKII may suit you if you need additional outputs.

  • Audient specifies USB power for both of the models mentioned.
  • Plugging in headphones on the EVO 4 mutes the speakers. For the iD14 MKII to run fully from bus power, Audient specifies at least 900 mA over USB 3.0.

Solid State Logic

According to the manufacturer, the SSL 2+ MKII is USB-powered and offers additional paths for shared listening checks.

  • The manual lists four balanced outputs and two separately controlled headphone outputs.
  • These extra outputs aren’t essential for listening on your own; check that the signal routing suits your workflow.

RME

RME describes the Babyface Pro FS as a USB-powered model with more advanced routing options.

  • RME lists different headphone connections and its TotalMix FX software.
  • The additional features only matter if you’ll use them in your workflow; they don’t mean the model is universally superior in sound quality.

Joybuy products

Similar products coming soon.

Frequently asked questions

Do I need microphone inputs for audio files that have already been restored?

No, not just for playback. First check whether your computer’s existing output works with your headphones or speakers. Inputs only become relevant if you also want to record or transfer audio from an analogue source.

Will a bus-powered interface work with any USB port?

No, the available USB power needs to meet the model’s requirements. Focusrite specifies 900 mA at the USB data and power port for the fourth-generation Scarlett 2i2, and warns that insufficient power may cause dropouts. For the iD14 MKII to run fully from bus power, Audient requires at least 900 mA over USB 3.0. Check these specifications against your computer before planning to use the interface without an additional socket outlet.

After transferring audio, how do I check that the archive file is OK?

Listen to the saved file through the intended playback path and carry out any checks required by your archive. The International Association of Sound and Audiovisual Archives describes quality control as part of handling digitised media; an input level meter during recording doesn’t replace checking the saved result.

What rights do consumers in Germany have when buying an audio interface?

For a consumer purchase from a trader in the EU, the European Union generally provides a statutory minimum legal guarantee of two years from receipt of the goods; a voluntary manufacturer’s warranty doesn’t replace it. For eligible online distance sales, you generally have a 14-day right to cancel from delivery, subject to legal exceptions. This is separate from a retailer’s voluntary returns policy.

What conformity checks should I make for electrical equipment sold in Germany?

The Federal Network Agency lists a correctly applied CE marking, an identifiable product with accurate manufacturer details, German instructions with the required information, and a declaration of conformity among the points it checks when monitoring the market. These general checks don’t confirm that a specific product listing is compliant.