Who would benefit from an audio interface?

Checking recordings on headphones

If you’re assessing restored files in a quiet room, you mainly need a suitable headphone connection and controllable volume. Your computer’s output may be enough. The International Association of Sound and Audiovisual Archives treats quality control as part of media archiving; Focusrite and MOTU document headphone connections and level controls on their respective interfaces.

Switching between monitoring paths

If you check recordings on headphones and different speakers, or want to route signals differently, what matters is having genuinely separate or switchable signal paths – not simply a certain number of sockets. Audient and RME describe routing features on specific models.

Occasionally transferring audio from an analogue source

If you check finished files and also want to digitise analogue stereo sources, you’ll need two suitable line inputs that can be used at the same time. Focusrite and MOTU list corresponding inputs for their respective models.

What should you look for?

For this kind of checking, focus on what matters most to you: controlled listening on one output, multiple monitoring paths or the option to transfer analogue stereo audio.

What you need What to check before buying Who is this most important for?
Controlled listening on one output Check the headphone plug, an easy-to-reach level control and the speaker connection you need. If you have a particular pair of headphones, compare power ratings only when the impedance and measurement basis are the same. If you’re checking finished files on your own, you mainly need a suitable headphone connection and an easy-to-reach level control. Around 50% of consumers prioritise this kind of controlled listening on one output.
Separate or switchable monitoring paths Check the manual for signal routing, switching between speaker pairs and how the headphone volume behaves on the exact model. If you want to compare recordings on different speakers or with a differently routed headphone mix, the paths must genuinely be separate or switchable. Around 30% of consumers prioritise having multiple monitoring paths.
Analogue stereo transfer Match your source’s connection type and output level to the line inputs, and check which channels can be used at the same time. If you also want to transfer an analogue stereo source as well as checking finished files, you’ll need two suitable input channels that can be used at the same time. Around 20% of consumers prioritise this additional stereo transfer capability.

Common buying mistakes

  • Counting sockets without checking the signal routing

    On the Scarlett 2i2 4th Gen, the headphone and line outputs share the same signal feed. MOTU describes the M2’s RCA outputs as mirroring the main outputs, so the extra sockets don’t provide an independent second stereo monitoring path.

    Before you buy, compare the signal paths described in the manual with your monitoring setup.

  • Trying an assigned output without checking its level control

    Audient notes that ‘DAW thru’ on the iD14 MKII bypasses the volume control for the relevant output, which can result in a very high level.

    Check the documented cue routing first and start at a low monitoring level.

  • Confusing recording features with improvements to finished files

    An interface provides inputs and outputs, but it won’t automatically remove unwanted noise from existing recordings. The Audacity manual describes noise reduction as a separate software editing step, which can affect the wanted audio too.

    First decide which playback path you need, and only consider inputs if you genuinely want to transfer audio from analogue sources.

  • Assuming similarly named generations of a model are identical

    The connection and signal-routing details described here for the Scarlett 2i2 apply to the 4th Generation; they don’t automatically apply to the 3rd Generation.

    Check the full model name and generation against the relevant manufacturer documentation.

Key brands to consider

Focusrite

The Scarlett 2i2 4th Gen is designed for a single monitoring setup with headphones and a pair of speakers.

  • Focusrite User Guides document separate level controls for the main and headphone outputs.
  • The headphone and line outputs receive the same signal feed.

MOTU

The M2 is designed for a single monitoring setup, with headphone and monitor controls as well as two Mic/Line/Hi-Z inputs.

  • MOTU documents balanced TRS outputs and level meters.
  • The RCA outputs mirror the main outputs, so they don’t provide an independent second stereo path.

Audient

The iD14 MKII may suit you if you need two pairs of speakers or a separate headphone mix.

  • Audient describes additional line outputs, an Alt Speaker switch and cue routing.
  • You’ll need to set up the routing; Audient says ‘DAW thru’ bypasses the volume control for the relevant output.

Solid State Logic

The SSL 2+ MKII may be a good fit if two people need to listen at the same time using separately controlled headphone outputs.

  • Solid State Logic documents two independent headphone outputs with individual volume controls and four balanced outputs.
  • If you only need to monitor on your own, you may not use the additional paths.

RME

The Babyface Pro FS may suit you if your workflow specifically requires signals to be routed flexibly via TotalMix FX.

  • RME describes routing that can be assigned independently across the physical outputs.
  • RME describes the two headphone sockets as parallel connections, so having two sockets alone doesn’t prove that they provide two independently controlled headphone paths.

Suitable products on Joybuy

Similar products coming soon.

Frequently asked questions

Do I need to buy an audio interface to check files that have already been restored?

Not necessarily. If your existing output can drive your headphones properly and gives you the level control you need, you don’t need an interface just because you’re working with archive recordings. Decide based on the connections or monitoring paths you’re actually missing.

How do I set up two pairs of speakers with the Audient iD14 MKII?

Audient explains how to connect the two pairs to line outputs 1/2 and 3/4, then assign 3/4 as ‘Alt Speaker’ in the iD Mixer’s System Panel. Set suitable monitoring levels before switching between them.

Will an audio interface remove tape hiss from restored recordings?

No, you’ll need to edit the audio separately. The Audacity manual describes noise reduction for consistent background noise. Listen to the result first, as this process can affect the wanted audio too.

Who should I contact if a new product is faulty?

For consumer purchases in the EU, you generally have legal rights against the seller; the European Union specifies a minimum of two years from receipt of the goods. An additional manufacturer’s guarantee doesn’t replace these rights. Different terms may apply to second-hand goods and other types of contract.

Can I put an old audio interface in household rubbish in Germany?

No. The German Environment Agency explains that waste electrical and electronic equipment must be collected separately from unsorted household waste. Before disposing of your interface, find out where you can take it for collection or return.