Who is this guide for?

Anyone looking to balance finished recordings

If you want to bring several pieces of audio to a similar perceived loudness, you’ll need to measure and process them after recording as well as capture clean audio in the first place. Youlean describes integrated loudness as a measurement taken over the full duration of a track or segment.

Anyone who often switches between voices or instruments

When you’re recording different sources, it’s important to set and monitor the input level appropriately. Focusrite documents Auto Gain and Clip Safe for the Scarlett 2i2 4th Gen; MOTU and PreSonus describe level meters on their respective models.

Anyone recording at a small desk

If space is limited, you’ll want connections that suit your setup and a monitoring option that works for the way you record. The inputs you need will depend on which sources you use at the same time.

What should you look for when buying?

You’ll need loudness metering in your software for finished files. When choosing an interface, focus on inputs, level control and monitoring that suit the way you work.

What you need What to check before buying Who it matters to
Loudness of finished files Check whether your audio software can measure integrated loudness and process files for your intended output. If I want to balance several finished recordings, I’ll need to measure the entire file and process it appropriately. Around 33% of consumers put the loudness of finished files first.
Recording level control Compare the features of the specific model: automatic assistance or clearly visible meters for manual control. If I often switch between voices or instruments, I’ll want to reset the input level and avoid clipping. Around 27% of consumers prioritise controlling varying recording levels.
Monitoring while recording Check the headphone connection and whether you can mix the input signal with computer playback as required. If I want to hear my voice or instrument while recording, I’ll need a monitoring option that suits the way I work. Around 20% of consumers focus primarily on monitoring.
Suitable connections Count the microphones and instruments you’ll use at the same time. Also check whether you need MIDI and whether the interface is compatible with your computer and operating system. If I want to connect just one source or several devices, I don’t want to overlook the inputs I need or pay for features I won’t use. Around 20% of consumers prioritise suitable connections and features.

Common misconceptions

  • Confusing peak levels or interface meters with equal file loudness

    An input meter shows the signal level while you’re recording. The perceived loudness of a finished file is a different measurement; matching peak levels alone doesn’t necessarily mean the files will sound equally loud.

    Record without clipping, then compare finished files using suitable loudness metering for your intended output.

    Comparing files after recording takes extra processing time.

  • Assuming the specific model has more microphone inputs than it does

    Connections vary from model to model. Audient lists one microphone preamp and a separate instrument input for the iD4 MKII; that isn’t the same as having two microphone preamps.

    Count the microphones you plan to use at the same time, then check the input types in the manual for the exact model variant.

    If you later want to record with two microphones at once and your chosen device doesn’t have enough suitable inputs, you may need to switch models.

  • Thinking high bit or sample rates will solve differences in loudness

    A recording resolution specification doesn’t describe how to measure and balance the loudness of complete finished files.

    Prioritise suitable connections, level control and your software workflow before relying on a resolution specification to solve this problem.

Brands and models to consider

Focusrite

The Scarlett 2i2 4th Gen is an option if you need two inputs and a helping hand with setting your levels.

  • Focusrite lists Auto Gain and Clip Safe as features for controlling recording levels on this model.
  • These features don’t automatically balance the loudness of finished files. Check compatibility with your operating system and the version of Focusrite Control 2 you use.

MOTU

The M2 is worth considering if you want two combo inputs and meters on the device itself.

  • MOTU documents LCD meters for inputs and outputs, as well as direct monitoring via the MON switch.
  • The meters show signal levels, not the loudness of complete finished files. Check that the connections and operating system support suit your setup.

PreSonus

The Studio 24c is worth considering if you need two inputs, MIDI and an easy-to-adjust monitor mix.

  • PreSonus lists two mic/instrument/line inputs, LED level meters, a mix control and MIDI In/Out.
  • These controls let you manage signal levels and monitoring, but they don’t indicate that the loudness of finished files can be balanced.

Steinberg

The UR22C is an option if you need two microphone preamps, MIDI and a monitor mix.

  • Steinberg lists two D-PRE microphone preamps, MIDI In/Out and Monitor Mix.
  • These features won’t automatically balance the loudness of finished files. Check whether you need the extra features for your setup.

Audient

The iD4 MKII is an option if you have one microphone source and also need an instrument input.

  • Audient documents one microphone preamp, an instrument input, Monitor Mix and Loopback for the iD4 MKII.
  • If you need two microphone preamps at the same time, consider another model. Specifications for a differently named iD4 don’t necessarily apply to the MKII.

Joybuy product selection

This selection includes a podcast kit described as an audio interface for recording with a computer or phone. Before buying, check that the connections are compatible with your microphones and computer.

Yinkaer G10-P17-P17 podcast kit with two microphones

Yinkaer G10-P17-P17 podcast kit with two 3.5 mm condenser microphones

If you’re looking for a podcast kit with microphones rather than a standalone interface, you can check this model against the connections you need and your recording setup.

The product name lists two 3.5 mm condenser microphones and an audio interface.

View at Joybuy

Frequently asked questions

Does Auto Gain balance the loudness of my finished recordings?

No. Focusrite describes Auto Gain as a way to help set the input level while recording. Integrated loudness is a separate measurement for comparing complete finished files, and you’ll also need to take your intended output into account.

Do I need to set my recordings to −23 LUFS in a student bedroom?

No, not just because of where you’re recording. The European Broadcasting Union recommends −23 LUFS for normalising broadcast programmes; that doesn’t make it a universal target for private recordings or every publishing platform.

What should I check first when connecting and monitoring?

Check that the computer connection and operating system support match the specific model. Choose an input that suits your source, then use headphones to check whether you want to hear only the input signal or computer playback as well.

What rights apply when buying an interface in Germany?

When you buy from a trader in the EU, you’re generally entitled to at least two years of legal guarantee rights from the date you receive the goods. Online purchases generally come with a 14-day right to cancel, subject to legal exceptions. The right to cancel because you’ve changed your mind is separate from claims relating to faulty goods; the European Union’s Your Europe website explains these consumer rights.

What should I look for on an audio interface’s labelling?

The Bundesnetzagentur lists CE marking, product identification and accurate manufacturer details among the things checked during market surveillance. The CE mark is based on a declaration made by the manufacturer under its own responsibility; it isn’t an independent mark of sound quality. Check the details for the specific product.