Who should consider this when choosing an interface

Recording sources with changing levels

If you regularly record vocals or instruments, it’s important to be able to set and check levels before every take. Focusrite describes Auto Gain for the Scarlett 2i2 4th Gen, while Audient explains Smartgain for the EVO 4.

Recording where power sockets are limited

If you want to power your interface from your computer, check whether the specific USB port you’ll be using can supply enough power for that model. Focusrite, MOTU and Zoom describe USB bus power for the respective models mentioned.

Working with files at different volumes

If you mainly compare completed recordings, software loudness normalisation is more relevant than adding automatic gain control to your interface. The Audacity manual explains loudness normalisation with a selectable LUFS target.

What to look for when buying

First, decide whether you want to set levels for new takes or match the volume of completed files. Then consider the available USB power and the number and type of inputs you need to use at the same time.

Priority What to check when buying Who it matters most to
Input levels for new takes Check whether the model offers Auto Gain, Smartgain or clear meters for setting levels manually. Focusrite describes Auto Gain on the Scarlett 2i2 4th Gen, Audient describes Smartgain on the EVO 4, and MOTU lists level meters on the M2. If I need to reset the levels for vocals or instruments before every new take, I want to be able to monitor the input level reliably. Around 34% of consumers put setting levels for new takes first.
Using the interface without an extra power socket Check the interface’s power requirements against the computer port you’ll actually use. A USB-C plug alone doesn’t guarantee that enough power will be available. If there isn’t a spare power socket where I work, my computer’s USB port needs to provide enough power. Around 33% of consumers prioritise using their interface without an extra mains socket.
Monitoring and file loudness Check the headphone connection and monitoring options for recording. For completed files, Audacity offers loudness normalisation with a selectable LUFS target; hardware level meters can’t replace this software step. If I want to match the playback volume of completed recordings, I need the right software feature. Monitoring also matters when recording. Around 20% of consumers put monitoring and file loudness first.
Inputs needed at the same time Count the sources you’ll record simultaneously and check the input types and microphone preamps. An instrument input isn’t automatically a second microphone input. If I’m recording several sources at once, each connection needs to suit the microphone or instrument. Around 13% of consumers prioritise having the right inputs available to use at the same time.

Avoiding common buying mistakes

  • Confusing input levels with the loudness of completed files

    Auto Gain and level meters help you set levels while recording, but they don’t automatically measure the perceived loudness of a collection of completed files.

    Before buying, decide whether you want to set levels accurately for new takes or work with existing files using LUFS metering and loudness normalisation.

  • Assuming bus power means you’ll never need a socket

    According to Focusrite, the Scarlett 2i2 4th Gen may need an additional 5-V power supply if the computer’s USB-C port doesn’t provide enough power.

    Check the power requirements for the specific model against the computer port you’ll be using before deciding you won’t need another power source.

  • Counting an instrument input as a second microphone input

    The Audient iD4 MKII has one microphone preamp and a separate instrument input. These are not two microphone inputs.

    List all the sources you want to record at the same time and check that their connection types match the inputs on the model.

  • Assuming the interface’s USB hub can power any device

    Arturia specifies a maximum of 250 mA at 5 V for the MiniFuse 2’s hub.

    Check the power requirements of the device you want to connect against this model-specific limit.

Relevant brands to consider

The following brands are relevant to this choice because of specific models and features. The details listed apply to the models described, not to every product from each brand.

Focusrite

The Scarlett 2i2 4th Gen is worth considering if you need two microphone inputs and want to set levels repeatedly before new takes.

  • Focusrite lists Auto Gain, Clip Safe and Direct Monitoring for the Scarlett 2i2 4th Gen.
  • If the computer doesn’t provide enough USB power, an additional 5-V power supply may be needed. Auto Gain doesn’t automatically match completed files by their LUFS loudness.

Audient

The EVO 4 offers Smartgain for two microphone inputs; the iD4 MKII has one microphone preamp and a separate instrument input.

  • Audient describes Smartgain for the EVO 4. For the iD4 MKII, Audient lists features including USB bus power and Monitor Mix.
  • The iD4 MKII’s inputs shouldn’t be mistaken for two microphone inputs.

MOTU

The M2 is a good option for setting levels manually, with meters you can read directly on the device.

  • MOTU lists an LCD with input and output level meters and USB bus power for the M2.
  • The level meters can’t replace loudness normalisation for completed files in an audio application.

Arturia

The MiniFuse 2 combines manual level control and Direct Monitoring with an additional USB hub port.

  • Arturia describes illuminated gain controls and meters that light up red when the input signal is too high.
  • According to Arturia, the USB hub supplies a maximum of 250 mA at 5 V, so it shouldn’t be treated as an extra power connection that can handle any load.

Zoom

The AMS-24 is worth considering if you need two combo inputs and a choice of power options.

  • Zoom documents USB bus power, external power or battery operation for the AMS-24.
  • External power may use up another socket, so if connections are limited, choose a power option that suits your setup.

Joybuy products for this use

Suitable products coming soon.

Frequently asked questions

Does Auto Gain automatically match the volume of older and new recordings?

No. On the models mentioned, Auto Gain or Smartgain sets the input level for a recording. For completed files, you can use LUFS-based loudness normalisation in suitable software; the Audacity manual explains this feature. Choose a target that suits how you’ll use the files.

Is a USB-C port enough to avoid needing another power socket?

Not necessarily. According to Focusrite, the Scarlett 2i2 4th Gen may need a separate power supply if the computer’s USB-C port doesn’t provide enough power. Check the connection and power specifications for the particular combination of computer and interface you’ll be using.

How do I set the levels before a take?

Connect your source to the right input and play or speak the loudest section you expect to record. Then adjust the model’s gain setting and check the recording. Audient specifically recommends using the most dynamic section when setting Smartgain. Only enable phantom power if your connected microphone needs it.

What should I know about a faulty interface or one that’s reached the end of its life?

In Germany, the statutory consumer guarantee is distinct from a voluntary manufacturer’s warranty; the Verbraucherzentrale explains the difference in its information dated 28 September 2026. Under section 10 of the ElektroG, old electrical equipment must be collected separately from unsorted municipal waste.