Who might need an audio interface?

Comparing audio with a finished file

If you want to judge whether noise reduction has also removed parts of the sound you want to keep, the Audacity Manual suggests listening to the removed noise can help you assess the edit. You don’t necessarily need a new analogue input for this.

Digitising cassettes

If you want to record the stereo output from your cassette deck, you should be able to connect both channels to two suitable inputs. The Audacity Manual describes connecting to the deck’s line output and using a suitable stereo recording setup.

Working by a bright window

If you work by a bright window, easy-to-reach listening controls and level monitoring that works in your chosen location are important. A display described by the manufacturer doesn’t, on its own, tell you how easy it is to read in direct light.

What should you look for?

Listening to an existing file

A good fit if: You don’t need to connect a cassette deck and your existing listening setup lets you make the comparison.

Bear in mind: You don’t need an additional line input or hardware level meter for this; you assess the noise reduction in your software.

Recording a cassette through an audio interface

A good fit if: You want to record the left and right outputs of your cassette deck separately, then listen to the file through headphones.

Bear in mind: The deck outputs, line inputs, cables, stereo setting and computer compatibility all need to work together. Direct monitoring doesn’t replace playback of the edited file from your computer.

USB cassette deck

A good fit if: You don’t already have a suitable cassette deck and want a device with its own USB audio transfer.

Bear in mind: Check the stereo recording setting and listening setup; USB transfer alone won’t tell you how well the noise reduction works.

What you need What to check before buying Who it matters most to
Listening to the original and edited versions Check for a headphone socket, a separate level control and the signal path between computer playback and your headphones. If I want to compare the original and noise-reduced file repeatedly, I need a suitable listening setup, not just direct monitoring. Around 33% of consumers prioritise this kind of listening comparison when buying.
Recording a cassette in stereo Check that the deck outputs, two line inputs that can be used at the same time, suitable cables and stereo assignment in the recording software all match. If I want to digitise a cassette, I need to record the left and right channels separately. Around 27% of consumers prioritise a suitable stereo recording setup for this.
Checking levels by a bright window Check the device position, where the controls are and the type of input and output meters at your intended setup location. If my workspace is by a bright window, I want to be able to reach and use the controls and level meter there. Around 20% of consumers prioritise this ease of use.
Checking connections and computer compatibility Check the system requirements for the exact model, USB connection, line mode and plug type for your existing headphones. If I want to connect my existing deck to my computer, the connection type and system support need to be compatible. Around 20% of consumers put this compatibility first when buying.

Avoid common buying mistakes

  • Confusing direct monitoring with the noise-reduced result

    Direct monitoring lets you hear the current input. To hear the edited result, play the file back from your software.

    Compare the saved original recording and the edited signal using the same listening setup.

  • Connecting a stereo line signal to the wrong input

    A microphone input may not be suitable for a stronger line-level signal. For a stereo recording, you also need to assign both channels correctly.

    Before buying, check the deck outputs, both interface inputs and the stereo setting in your recording software.

    Depending on your deck and interface, you may need suitable connection cables.

  • Assuming a level meter will be easy to read by a window

    Manufacturer information about displays or LEDs describes the display itself, not how visible it will be in direct light at your particular workspace.

    Plan where you’ll position the device and check that you can read the display in the lighting conditions where you intend to use the interface.

  • Assuming a high sample rate means better noise reduction

    Interface specifications describe recording features; Audacity treats noise reduction as a separate editing step. A single recording specification therefore doesn’t tell you what the edited audio will sound like.

    First choose the connections and listening setup you need, then assess the editing separately by comparing the original with the result.

Brands and models to consider

Focusrite

The 4th Generation Scarlett 2i2 is a compact option with two dedicated line inputs for potential stereo transfer.

  • Focusrite says the main and headphone levels can be adjusted separately.
  • This information applies to the 4th Generation. It doesn’t mean the interface removes noise or that the display is easy to read by a bright window.

MOTU

According to MOTU, the M2 has two combo inputs and a level meter, while the M4 adds two dedicated line inputs.

  • For the M2, MOTU specifies a colour display with input and output levels, as well as a dedicated headphone control.
  • The manufacturer’s information doesn’t say how easy the display is to read in direct light from a window.

PreSonus

According to PreSonus, the Studio 24c is a two-channel option with line-capable inputs and LED level meters.

  • The manufacturer lists two Mic-/Instrument-/Line inputs, four LED level meters and a monitor mix control.
  • To assess the edited signal, you need to distinguish computer playback from the direct input; the display specifications don’t prove that it’s easy to read in sunlight.

Arturia

According to Arturia, the MiniFuse 2 has two inputs and an adjustable mix of the input signal and computer playback.

  • The manufacturer describes a dedicated headphone level control and a monitoring mix control.
  • These controls don’t indicate how well the interface removes tape hiss.

Roland

The Rubix22 is a two-channel option with combo inputs, provided its documented connections suit your existing deck.

  • The manual describes jack connections that support balanced or unbalanced connections.
  • Roland warns against switching on 48-V phantom power unless you’re using a microphone that requires it.

Suitable products on Joybuy

Suitable products will be available soon.

Frequently asked questions

Does an audio interface remove tape hiss?

No, an audio interface doesn’t remove tape hiss by itself. The Audacity Manual describes noise reduction as a software editing process involving a noise profile, a preview and a check of the removed noise. The result may still be unsatisfactory if the original recording is poor.

How do I connect a cassette deck for stereo recording?

If your deck has left and right line outputs, use suitable cables to connect them to two appropriate line inputs, then select stereo in your recording software. The Audacity Manual recommends using a line input for a line-level signal, so don’t connect the deck output to a microphone input without checking first.

What should I keep for editing again later?

Keep an unedited recording. The Audacity Manual’s workflow for digitising cassettes recommends saving a raw master before applying noise reduction.

What rights and disposal rules should I know about when buying in Germany?

For consumer goods sold in the EU, Your Europe explains that the legal guarantee covers faults for at least two years; this is separate from a voluntary manufacturer’s warranty. The German Environment Agency advises that end-of-life electrical equipment must be disposed of separately from household waste. According to Your Europe, the CE mark is a declaration made by the manufacturer, not a certificate issued by a central EU body.