Which option is right for you?

Editing choir recordings with headphones

If you’re editing files that have already been recorded, you need a suitable way to listen through your headphones; extra microphone inputs are less important for this task. The Audacity manual explains how to select a playback device in the software.

Planning to record in stereo

If you’d like to connect two microphones at the same time in future, what matters is the number of suitable microphone preamps, not just the total number of inputs. Focusrite lists two XLR microphone inputs for the Scarlett 2i2 4th Gen, while Audient specifies two microphone preamps for the EVO 4.

Limited desk space

If you switch between editing and occasional recording, you’ll need space for the interface, its cables and its controls. Focusrite publishes the dimensions of the Scarlett Solo 4th Gen, while Solid State Logic lists separate dimensions for the SSL 2 MKII.

What should you look for when buying?

Your computer’s existing audio output

A good fit if: You’re editing existing recordings and can already connect your headphones or monitors to your computer in a way that works for you.

The trade-off: You won’t need an extra device, but you also won’t get any additional microphone connections or interface controls.

Compact interface for one microphone source

A good fit if: As well as listening back, you’d occasionally like to record a single microphone source.

The trade-off: On the Scarlett Solo 4th Gen, the second input isn’t a second XLR microphone input, as Focusrite’s model specifications show.

Two microphone preamps

A good fit if: Alongside editing, you’d like to record a stereo microphone pair at the same time.

The trade-off: Check that the microphone connections and any phantom power you need are suitable for your recording setup.

Additional line outputs

A good fit if: You need additional analogue outputs as well as a standard pair of monitor outputs.

The trade-off: According to Focusrite, the Scarlett 4i4 4th Gen has four rear line outputs but two front XLR combi sockets. Check the intended power supply too.

Criterion What to check before buying Who is this particularly important for?
Headphone and monitor listening Headphone connection, monitor connections and where the controls sit on your desk. If I mainly edit existing choir recordings through headphones or monitors, I want to be able to connect my listening equipment easily. Around 33% of consumers put this need first when buying.
Two microphones at the same time Number of suitable microphone inputs and the connections on the microphones you plan to use. If I want to record with a stereo microphone pair in future, I need to be able to connect both microphones to suitable inputs at the same time. Around 25% of consumers prioritise having two suitable microphone inputs for this.
Space and ease of use The interface’s footprint and the space around its sockets for plugs and cables. With a small desk, I want to fit the interface and its cables in and still be able to reach the controls I need. Around 25% of consumers focus above all on footprint and ease of use.
Computer, drivers and power Operating system, required drivers and suitable USB or mains power. If I want to use the interface with my existing computer, setup and power need to be suitable for that device. Around 17% of consumers give computer compatibility top priority.

Common buying mistakes

  • Assuming “two inputs” means two microphone inputs

    On some compact interfaces, one input is for an instrument rather than a second XLR microphone. Focusrite lists one XLR microphone input for the Scarlett Solo 4th Gen; the second connection is a jack socket.

    If you’re planning to use a stereo microphone pair, check the connections on both inputs and whether you can use them for your microphones at the same time.

    If there isn’t a suitable second microphone input, you may need a different interface or extra recording equipment later.

  • Making recording latency your main concern when editing files

    Latency when monitoring incoming signals is relevant to a different task from editing files that have already been recorded. A quoted latency figure, on its own, therefore doesn’t prove that an interface is better for editing files alone.

    First decide whether you’ll be recording and monitoring live or just editing existing recordings. Only prioritise live monitoring if it matters to your workflow.

  • Comparing only the dimensions of the casing

    The published dimensions of an interface don’t necessarily account for the space its headphone, monitor and USB cables need on your desk.

    Measure the available space, including the sides where the plugs go, and consider which controls and connections you’ll need to reach once everything is set up.

    Depending on how the connections are arranged, you may need to route the cables differently or rearrange your workspace.

Brands to consider

Focusrite

The Scarlett range includes compact models for different connection needs, from the Solo to the 4i4.

  • Focusrite lists two XLR microphone inputs for the Scarlett 2i2 4th Gen.
  • The Scarlett Solo 4th Gen has just one XLR microphone input. The 4i4 4th Gen is listed with two front XLR combi sockets; check the power supply and the connections you need separately.

Audient

The EVO 4 is a compact range with two microphone preamps. According to Audient, the iD4 MKII combines a microphone input with an instrument input.

  • The EVO 4 has two microphone preamps, according to Audient.
  • The iD4 MKII’s two analogue inputs aren’t the same as having two microphone preamps. Smartgain is a manufacturer feature, not proof of better choir recordings.

Solid State Logic

The SSL 2 MKII and SSL 2+ MKII are desktop interfaces in the two-input category.

  • Solid State Logic lists two independently controlled headphone outputs for the SSL 2+ MKII.
  • The SSL 2+ MKII also has two recording inputs. The 234 × 159 mm footprint specified by Solid State Logic applies to the SSL 2 MKII and shouldn’t be assumed to apply to the 2+ without checking.

PreSonus

The AudioBox GO is a small interface for one microphone source alongside an instrument.

  • PreSonus lists a microphone/line combi input, a separate instrument input, a headphone output and two balanced monitor outputs.
  • The two listed inputs aren’t two microphone preamps for a stereo microphone pair.

MOTU

The M2 is designed for two microphone inputs, headphone monitoring and visible input and output levels.

  • MOTU describes two microphone-capable inputs and a display for viewing levels.
  • Manufacturer claims about latency and sound comparisons apply under the stated test conditions. They don’t prove a general buying advantage when editing existing files.

Joybuy products for computer-based vocal recording

This selection includes a podcast and audio mixer set for computer-based vocal recording with two microphones. You don’t automatically need a recording set like this just to edit existing choir recordings.

Yinkaer G10-P17-P17 podcast kit with two microphones

Yinkaer G10-P17-P17 podcast kit with two microphones

For computer-based vocal recording with two microphones. The product description says the set includes an audio mixer or sound card.

Includes two 3.5 mm condenser microphones and microphone stands. The product description lists computers and phones as compatible devices.

Joybuy

Frequently asked questions

Do I need an audio interface to edit an existing choir recording?

Not necessarily. Audio software can use an existing playback device. Next, decide whether you can connect your headphones or monitors suitably, and whether you’d like to make your own recordings in future.

Are two inputs enough to record a choir in stereo?

Only if both inputs are suitable for your microphones and can be used at the same time. According to Focusrite, the Scarlett 2i2 4th Gen has two XLR microphone inputs. On the Scarlett Solo 4th Gen, the second analogue input isn’t a second XLR microphone socket.

What should I check about connecting and setting up the interface with my computer?

Check the operating system, required drivers and power supply against the specifications for the specific model. Then select the interface as the playback device in your audio software. If you’re recording, check the input routing there too.

Which labels and documents are relevant when selling in Germany?

For electrical and electronic equipment offered for sale, the German Federal Network Agency lists checks for retailers including correct CE marking, clear identification of the device and German-language instructions for non-commercial users. You’ll need to assess whether a specific listing meets the requirements by checking that listing.

What happens if an item is faulty or you want to return it after buying online in Germany?

Your statutory rights against the seller are separate from any voluntary manufacturer’s guarantee. According to the consumer advice centre, online purchases generally come with a 14-day cancellation period from the date you receive the goods. Check the seller’s information for the specific purchase.