For a choir rehearsal in an untreated room, two microphone inputs are enough if you only want to record a stereo pair. If you want to record additional microphones on separate tracks, you’ll need more built-in microphone preamps. Shure points out that microphone choice and placement shape the sound of an acoustic recording. So, more channels won’t remove unwanted room sound, and they won’t give you any extra recording capacity if you’re only using a stereo pair.
Which setup is right for you?
Choir director using a stereo microphone pair
You want to record the rehearsal with two microphones and assess how the choir and room sound work together. Shure describes microphone choice and placement as key factors in the sound of acoustic recordings.
Recording additional sound sources
You want to record additional microphones alongside the choir, each on a separate track. So check how many built-in microphone preamps there are, rather than just counting the total number of inputs.
Rehearsal leader handling the technical setup
You’re setting everything up on site and want to monitor input levels, connect the microphones correctly and listen back to them. Check the features and power requirements of the specific devices you’re considering.
What should you look for when buying?
First, decide how many microphones you want to record separately during the same rehearsal. Assess the room sound separately from the number of channels by making a test recording from your intended microphone position.
| What to consider |
What to check before buying |
Who is it most relevant to? |
| Choir balance and room ambience |
Allow for two genuine microphone inputs for a stereo pair, and make a short test recording from your intended position. |
If I want to assess the balance between the choir and the room, I listen to a short recording made from the planned microphone position. Around 33% of consumers focus on choir balance and room ambience. |
| Additional microphone tracks |
Count the microphones you need to use at the same time and compare this with the number of built-in microphone preamps on the exact model. |
If I want to record additional microphones separately alongside the stereo pair, perhaps for a solo voice or an accompanying instrument, I check the number of preamps. Around 27% of consumers prioritise additional microphone tracks recorded at the same time. |
| Level monitoring and listening back |
Check the level meters, the headphone output you want and the operating system compatibility of the specific device. |
If I want to monitor the recording during the rehearsal, I need a practical way to listen back and check levels with my setup. Around 20% of consumers put this kind of monitoring first. |
| Overall setup requirements |
Check your existing microphones, XLR cables, stands, monitoring options and computer connection against your planned setup. |
If I want to put together a manageable setup for a stereo pair, I check what I already have and which connections I need. Around 20% of consumers prioritise the requirements of the complete setup. |
Common buying mistakes
-
Confusing total inputs with microphone preamps
A model may have additional line inputs as well as microphone inputs. These don’t automatically provide extra built-in microphone preamps for microphones you want to record separately.
Count the microphones you want to use at the same time on separate tracks, then compare that number with the microphone preamps on the exact model.
Buying more channels to fix poor room acoustics
Microphone choice and placement affect the sound of a recording. A stereo pair can pick up details of the room, and a higher channel count won’t change the room acoustics.
First, try a well-positioned stereo pair in the rehearsal room. Add more channels only if you want to record additional signals at the same time.
-
Switching on 48 V phantom power without checking
Focusrite warns that phantom power can damage devices that aren’t designed to handle it.
Before switching it on, check the instructions for your microphones and all connected devices.
Key brands to consider
Focusrite
The Scarlett 2i2 and 18i16 models cater for setups with two and four microphone inputs respectively.
- Focusrite’s product information lists two microphone preamps for the Scarlett 2i2 and four microphone inputs for the Scarlett 18i16 4th Gen.
- The 2i2 doesn’t offer three or four microphone inputs that can be used separately at the same time. The 18i16’s line inputs aren’t additional built-in microphone preamps.
MOTU
The M2 is a two-microphone option with level meters and direct monitoring.
- MOTU’s specifications list two combo microphone inputs, individually switchable 48 V phantom power and USB bus power.
- The M2 on its own isn’t enough if you want to connect more than two microphones at the same time.
Solid State Logic
The SSL 12 has four built-in microphone preamps and an ADAT input.
- Solid State Logic’s manual lists four microphone preamps and separate headphone outputs.
- ADAT won’t add analogue microphone preamps without suitable external hardware. For Windows, the manual specifies that you need to install an SSL audio driver.
Behringer
The UMC404HD is an option for using up to four microphone inputs at the same time.
- Behringer lists four microphone preamps, switchable phantom power, hardware direct monitoring and a supplied power adapter.
- If you’re recording with a stereo pair only, some inputs will go unused.
Steinberg
The UR44C is another option, with four microphone preamps and DSP monitoring.
- Steinberg’s manual lists four D-PRE microphone preamps and DSP monitoring.
- Before deciding to buy, check that the specific model is available and compatible with your setup.
Joybuy product selection
The Joybuy option listed here is a podcast kit with a sound card and two microphones. Before recording a choir, check that the microphone connections and the number of separate input channels you need are right for your planned setup.
No image available
Yinkaer G10-P17-P17 podcast kit with two microphones
This kit may suit a computer or mobile device setup using the included microphones. Check that their connections are suitable for your planned choir recording.
The product description lists a sound card and two 3.5 mm condenser microphones. Compatible devices include PCs, Macs and mobile devices.
View at Joybuy
Frequently asked questions
Can a better audio interface remove echo from the rehearsal room?
No, the interface alone won’t remove echo. Shure describes microphone choice and placement as key factors in the sound of an acoustic recording. Listen to a short test recording. If there’s too much unwanted room sound, try adjusting the microphone position first.
Do I need 48 V for each of my two condenser microphones?
It depends on the requirements of the specific microphones. Check that the two inputs you’re using provide the power they need. MOTU says that both microphone inputs on the M2 have individually switchable 48 V. Focusrite warns against switching on phantom power for devices that aren’t designed for it.
What should I set up on my computer before the first recording?
Check the connection and any drivers required for the exact interface model. Set up separate input channels for the stereo pair, then check the levels using a short, loud test section. For example, the SSL 12 manual says that you need to install an SSL audio driver for Windows.
What should I check about accessories and compatibility before ordering?
Check that your existing microphones, cables, stands and headphones are suitable for your planned setup. Also check the contents of the specific offer and confirm compatibility with your computer or mobile device.
Can I record a choir rehearsal in Germany and share it without any further steps?
Not automatically. Under § 77 UrhG, performing artists have rights relating to the recording of their performance, as well as its reproduction and distribution. § 201 StGB covers the unauthorised recording of another person’s non-public spoken words. If personal data is being processed, you’ll also need an appropriate legal basis. If you’re relying on consent, the Data Protection Conference says it must be freely given, informed and specific to the circumstances. Agree the purpose of the recording and any plans to share it with everyone involved in advance.