For an acoustic demo in a community hall, your interface should have enough built-in microphone preamps for all the individual tracks you want to record at the same time. Two microphones need two suitable inputs; for three or four microphones, or up to eight, you’ll need more. Also test your microphone positions and the room sound, and check the specific model’s phantom power, monitoring and power supply during a rehearsal.
Which setup is right for you?
Small acoustic duo
If you want to record no more than two microphone signals at once and keep your setup simple, consider interfaces with two suitable inputs. Arturia lists two inputs for the MiniFuse 2, while Focusrite specifies two XLR microphone inputs for the Scarlett 2i2 4th Gen.
Ensemble recording separate tracks
If you want to record three or more microphones at once and mix them separately later, check how many built-in microphone preamps the interface has. Solid State Logic and Behringer list four for the SSL 12 and UMC404HD respectively; Behringer and PreSonus list eight for the UMC1820 and Studio 1824c respectively.
Recording in a challenging hall
If room sound and unwanted noise are a concern, set aside time to try different microphone positions with a test recording. Shure recommends positioning the microphone closer to the instrument’s loudest point, or screening the instrument, when the room acoustics are poor.
What should you look for when choosing?
| What matters |
What to look for |
Who is this important to? |
| Number of microphone tracks |
Count the microphone inputs you need to use at the same time. Digital expansion inputs are not automatically built-in microphone preamps. |
If I want to record several sources separately, I need to know how many microphone tracks I’ll need at once. Around 36 % of consumers put having the right number of inputs first. |
| Room sound and microphone position |
Plan a listening test using different microphone positions before treating extra interface features as a solution to the hall’s acoustics. |
If the hall is clearly audible in the recording, I want to try out microphone positions before the recording session to find one that suits the performance. Around 29 % of consumers prioritise room sound and microphone position. |
| Setup, power and monitoring |
Check the computer connection, the power supply required and how many headphone mixes you need. |
If I need to work on site with my computer and several monitoring options, I want to check the connections and power supply in advance. Around 21 % of consumers prioritise a practical setup and monitoring. |
| Phantom power and microphones |
Check your microphone manuals against the specific interface’s 48 V circuitry, and see whether it affects several inputs at once. |
If I’m connecting microphones with different requirements at the same time, the phantom power must be suitable for all of them. Around 14 % of consumers pay particular attention to microphone compatibility. |
Avoid common selection mistakes
-
Confusing total inputs with microphone inputs you can connect directly
The SSL 12 has four analogue microphone preamps. Additional ADAT channels are not extra built-in microphone connections.
When making a list of the inputs you need, compare the number of built-in microphone preamps, not just the total number of inputs.
You may need suitable external hardware to add microphone tracks via ADAT.
-
Expecting an interface to remove the hall’s echo
Microphone distance and position affect how much room sound and unwanted noise gets into a recording. An interface can’t replace suitable microphone placement.
Try the planned positions in a test recording and listen back before deciding whether you need more equipment.
-
Switching on 48 V without checking how your microphones are connected
Depending on the interface, phantom power may affect both inputs or a group of channels. Arturia warns that phantom power can damage certain connected devices, including some ribbon microphones.
Check your microphone manuals and the selected interface’s channel groupings before connecting anything.
Key brands at a glance
Focusrite
The Scarlett range includes models for compact setups and larger microphone line-ups.
- Focusrite says the Scarlett 2i2 4th Gen offers direct monitoring and Auto Gain, while the Scarlett 18i20 4th Gen has eight microphone preamps.
- On the Scarlett 2i2 4th Gen, the 48 V switch affects both XLR inputs. A jack plug in a channel uses the same input rather than adding another microphone channel.
Solid State Logic
The SSL 12 is designed for setups with up to four microphones connected directly.
- Solid State Logic lists four analogue microphone preamps and an ADAT input.
- Additional ADAT channels require suitable external hardware; they are not extra built-in microphone connections.
Arturia
The MiniFuse 2 is designed for a compact setup, with two inputs and headphone monitoring.
- Arturia lists two inputs, a monitor mix control and 48 V phantom power.
- According to Arturia, the switch activates phantom power for both XLR inputs.
Behringer
The UMC404HD and UMC1820 are designed for different-sized line-ups.
- Behringer lists four built-in microphone preamps for the UMC404HD and eight for the UMC1820.
- The UMC404HD is designed to use the supplied power adapter, according to the manufacturer. On the UMC1820, the 48 V circuitry is split into two groups of four.
PreSonus
According to PreSonus, the Studio 1824c offers eight microphone preamps and configurable monitor mixes.
- Its eight built-in microphone preamps suit a line-up that needs to connect that many microphones directly.
- The 48 V circuitry is global. Additional digital input channels require suitable external hardware to connect more microphones.
Joybuy product
An audio interface set designed for vocals, with microphones for a compact recording setup.
No image available
Yinkaer G10-P17-P17 podcast kit with two microphones
This set is worth considering if you’re looking for a device described as an audio interface or sound card, along with microphones for vocal recording.
According to the product name, it includes two 3.5 mm condenser microphones and desk stands. Effects and voice changing are also listed.
View on Joybuy
Frequently asked questions
Are two inputs enough for vocals and an acoustic instrument?
Yes, if you only need two input signals recorded at the same time on separate tracks. If you also want to record a room microphone separately, you’ll need another suitable input. On the Scarlett 2i2 4th Gen, the jack connection doesn’t provide an extra track alongside the XLR connection on the same channel.
How can I test the community hall before recording?
Listen back to a short test recording. If there’s too much room sound, first adjust the distance and position of the microphones. Shure recommends trying different positions and distances; moving the microphone closer can help when the room acoustics are poor.
Will I need a power adapter or extra software as well as the USB cable?
It depends on the interface and your computer. Focusrite lists an optional 5 V connection for the Scarlett 2i2 4th Gen if your computer doesn’t supply the required 1.5 A over USB-C. For the UMC404HD, Behringer lists a supplied power adapter and a downloadable Windows driver. Check the requirements for your specific setup before the recording session.
Can I record other musicians and conversations in the hall?
Before recording, check with everyone involved that they agree to the recording and how you intend to use it. Under § 77 UrhG, performers have the exclusive right to record their performance on a sound carrier. § 201 StGB also covers the unauthorised recording of another person’s non-public speech. Any other requirements will depend on who and what data are involved, and how the recording is used.