Who is this buying decision relevant to?

People mixing on headphones alone

If you switch between headphones and a pair of monitors at a small desk, the right connections and easy-to-reach level controls are important. Focusrite lists separate controls for the headphones and main outputs on the Scarlett 2i2 4th Gen.

Producers with a stereo synthesiser

If you also want to record an analogue synthesiser or drum machine in stereo, you’ll need two line channels that can be used at the same time. MOTU describes the M2 as having two mic/line/Hi-Z combo inputs.

Mixers who need additional monitoring paths

If you want to connect external hardware or listen on headphones with someone else, check that the signal can be routed independently rather than simply counting the sockets. MOTU describes the M2’s RCA outputs as mirrored; SSL lists two independent, separately controlled headphone outputs for the SSL 2+ MKII.

What should you look for when buying?

Specifications from Focusrite, MOTU and Solid State Logic can help you compare connections and routing for your particular setup. Choose according to the signal paths you actually need, and check the conditions for using them at the same time on each model.

What to consider What to check before buying Who is this especially relevant to?
Headphones and monitors The right headphone and monitor connections, plus separate level controls; don’t assume that separate volume controls mean independent routing. If I switch between headphones and monitors on my desk, I want to be able to connect both easily and adjust their levels directly. Around 33% of consumers put monitoring first.
Stereo recording Two suitable line inputs that can be used at the same time, along with the right cables and signal levels. To record my synthesiser in stereo, I need two channels that can be used at the same time, not just several visible sockets. Around 25% of consumers put recording hardware in stereo first.
Additional signal paths Independently assignable outputs or headphone feeds; the number of sockets and separate level controls alone don’t prove that these are available. If I want to connect external hardware or listen with someone else using a separate headphone feed, I check how the signal is actually routed. Around 17% of consumers put additional signal paths first.
Space and computer Check the space it needs, including cables, USB power and compatibility with your operating system and DAW. On a small desk, the interface needs to fit with its cables plugged in and work with my computer. Around 25% of consumers put space and computer compatibility first.

Pitfalls to avoid with connections and power

  • Assuming extra sockets are independent outputs

    According to MOTU, the RCA outputs on the M2 mirror its other analogue outputs. So an extra pair of sockets doesn’t automatically give you a separately assignable mix.

    Check the documented channel assignments and headphone routing for the exact model you plan to use.

    If you need another independent output, you may need extra routing hardware such as a monitor controller.

  • Assuming every input socket gives you another recording channel

    On the Scarlett 2i2 4th Gen, plugging in a 6.35 mm jack disables the microphone input on the same channel.

    Count the channels you can use at the same time with your particular synthesiser and microphone setup, rather than relying on the number of sockets.

  • Assuming a USB-C connector guarantees enough power

    Focusrite says the Scarlett 4i4 4th Gen may need an optional additional power supply if the computer doesn’t provide 1.5 A over USB-C.

    Check the power available from your computer’s port and the requirements for the exact model version.

    Depending on the USB port, you may need a suitable additional 5 V USB-C power supply.

Key brands to consider

Focusrite

The Scarlett 2i2 4th Gen and 4i4 4th Gen cater to different needs for monitoring and line outputs.

  • Focusrite lists separate headphone and main level controls on the 2i2.
  • The 4i4 may need an additional power supply if the computer’s USB-C port doesn’t provide 1.5 A.

MOTU

The M2 is worth considering for stereo line recordings and a solo mixing setup, with separate monitor and headphone controls, as well as MIDI In/Out.

  • MOTU lists two combo inputs with line-level capability and dimensions of 19,05 × 10,8 × 4,5 cm, excluding connected cables.
  • According to MOTU, the RCA outputs mirror the other outputs and aren’t specified as an additional independent monitoring path.

Solid State Logic

The SSL 2+ MKII is an option if you genuinely need additional balanced outputs or two headphone feeds.

  • Solid State Logic describes the 2+ MKII as having four balanced outputs and two independent, separately controlled headphone outputs.
  • These features apply to the SSL 2+ MKII and shouldn’t be assumed to apply to the SSL 2 MKII.

Audient

The iD14 MKII is an option if you’re thinking about adding digital inputs in future, as well as using it for stereo today.

  • Audient lists a USB power requirement of at least 0,9 A at 5 V for the iD14 MKII when connected to a suitable port.
  • The published headphone specifications don’t, by themselves, prove it will sound better in your own setup; check that your USB port is suitable too.

Steinberg

The UR22C is worth considering for a setup with two inputs and outputs, plus MIDI In/Out.

  • Steinberg also lists a monitor mix.
  • The advertised maximum resolution of 32 Bit/192 kHz doesn’t, by itself, prove it will deliver a better mix.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need lots of inputs to mix a track that’s already in my DAW?

No, not just for mixing. Choose your inputs based on the sources you actually want to record; for an analogue stereo synthesiser, you’ll need two line channels that can be used at the same time.

How do I set up additional outputs in my DAW?

Select the interface as your audio device and enable the outputs you need in your DAW’s audio settings. Focusrite explains these steps for the Scarlett 4i4 4th Gen on Windows using ASIO and on macOS using Core Audio; the exact assignments depend on your DAW.

What should I check for space and power?

Measure the space it needs with the cables plugged in, and check the USB port against the requirements for the exact model. According to Focusrite, the Scarlett 4i4 4th Gen may need an additional 5 V USB-C power supply if the computer doesn’t provide 1.5 A.

How can I tell if additional outputs can really be used independently?

Check the documented signal assignments for the exact model and the output settings in your DAW. According to MOTU, the M2’s RCA outputs mirror the other outputs; they don’t provide an additional independently assignable mix.