Which solution is right for you?

Dialogue editors monitoring on their own

If you mainly compare edited and unedited sections of speech through headphones, an easily accessible level control is important. You don’t automatically need any extra microphone inputs.

Editing teams reviewing audio together

If two of you listen at the same time, check before buying whether each person needs their own headphone level or whether you need to hear different monitor mixes.

People using different office computers

If you connect the device at different workstations, make sure the operating system, driver installation and USB power supply are compatible with each computer.

What should you look for when buying?

Use your computer’s existing output

A good fit if: You listen on your own through connectable headphones and don’t need any extra recording or monitoring connections.

Bear in mind: This won’t give you any additional interface connections or separate hardware signal paths.

Interface for one pair of headphones

A good fit if: At your own workstation, you’d like an easily accessible headphone control or extra monitor connections.

Bear in mind: According to Focusrite, the headphone and line outputs on the Scarlett 2i2 4th Gen share the same signal feed; separate level controls don’t provide different mixes.

Interface for listening together

A good fit if: You regularly listen together using two pairs of headphones and need separate volume controls.

Bear in mind: Two separately adjustable headphone outputs don’t automatically mean that they carry different signals.

Interface with cue routing

A good fit if: You want the headphone output to receive a different mix from another output.

Bear in mind: You’ll need to set up the routing; according to Audient, the ‘DAW thru’ setting on the Audient iD14 MKII bypasses the volume control for this output.

What you need What to check before buying Who is this important to?
Adjustable personal monitoring Check for a headphone socket and a suitable plug or adaptor, as well as an easily accessible level control. When I compare dialogue sections on headphones on my own, I want to adjust the level directly on the device and avoid choosing unnecessary recording features. Around 36% of consumers rank adjustable personal monitoring as their top buying priority.
Two people listening at the same time Check the number of headphone sockets and separate volume controls; also find out which signal is carried by each output. When the two of us listen at the same time, we need suitable connections and controllable levels. Around 29% of consumers put listening together as a pair at the top of their list.
Separate signal paths Check the manual for the specific model to see how its outputs are assigned and levels controlled. To compare different versions of a dialogue track, I may need different signals on the headphone and monitor outputs, not just two volume controls. Around 21% of consumers prioritise separate signal paths.
Different office computers Check the operating system, drivers, installation permissions, USB connection and power supply at each workstation. When I move between office computers, the setup needs to work with the operating systems and connections available at each one. Around 14% of consumers say compatibility with different computers is their most important buying priority.

Common buying mistakes

  • Assuming two level controls mean two different mixes

    According to Focusrite, the headphone and line outputs on the Scarlett 2i2 4th Gen share the same signal feed.

    If you want to send different dialogue versions to separate outputs, check the output assignment for the specific model.

  • Buying recording features as a substitute for loudness control

    An interface level control or meter doesn’t automatically measure programme loudness. The European Broadcasting Union recommends measuring programme loudness for normalisation.

    First, work out how you’ll use your headphones and software to check finished files. Only choose microphone inputs if you actually want to record new signals.

  • Choosing two headphone sockets without checking levels and routing

    Separate volume controls and different signals are two different requirements. Audient warns that ‘DAW thru’ on the iD14 MKII bypasses the headphone output’s volume control.

    Ask for confirmation of the sockets, controls and signal assignment you need on the specific model.

  • Assuming a USB plug means a straightforward setup on an office computer

    Driver requirements and USB power conditions can vary by model and operating system.

    Check the operating system, installation permissions, USB connection and cable against every workstation you’ll actually use.

Relevant brands at a glance

Focusrite

Focusrite’s User Guides describe the Scarlett 2i2 4th Gen as designed for one person, with headphone and line outputs.

  • The manual lists a dedicated headphone level control.
  • The headphone and line outputs on the Scarlett 2i2 4th Gen share the same signal feed.

MOTU

MOTU describes the M2 as having a dedicated headphone control and meters for inputs and outputs.

  • These meters may be useful when checking input and output levels.
  • The manufacturer’s claims about latency and sound quality don’t prove that the device will help you judge edited dialogue more accurately.

Solid State Logic

According to Solid State Logic Support, the SSL 2+ MKII is designed for two people to use headphones at the same time.

  • For this model, the manufacturer documents two independent headphone outputs with separate volume controls.
  • The manufacturer says a dedicated driver needs to be installed on Windows; this information applies to the model mentioned.

Audient

Audient describes assigning the headphone output to cue mixes on the iD14 MKII.

  • This routing may be useful if you want the headphones to receive a different mix.
  • According to Audient, ‘DAW thru’ bypasses the volume control for this output. Routing doesn’t mean that two people can automatically use separate headphone outputs.

RME

RME describes TotalMix FX on the Babyface Pro FS as providing freely assignable routing and mixing to hardware outputs.

  • RME lists drivers and routing to physical outputs for this model.
  • These features don’t demonstrate an advantage when spotting dialogue errors and aren’t automatically necessary for straightforward personal monitoring.

Joybuy products for this purpose

The following Joybuy products are audio devices for headphone playback, but they aren’t audio interfaces for recording or independent routing.

Douk Audio T4 PRO Mini Valve phono and headphone amplifier

Douk Audio T4 PRO Mini Valve phono and headphone amplifier

This device may be suitable for desktop headphone playback; it’s listed as a phono and headphone amplifier, not an audio interface.

The product name specifies a GE5654 valve. According to the product information, you should use the correct external DC power supply.

View on Joybuy
Nobsound Q4 USB Audio Gaming DAC with headphone amplifier

Nobsound Q4 USB Audio Gaming DAC with headphone amplifier

As a USB audio DAC with a headphone amplifier, this device may be suitable for PC headphone playback; it isn’t an audio interface.

The product name lists Bluetooth, an optical input, 24 Bit/192 kHz, tone controls and a remote control.

View on Joybuy

Frequently asked questions

Does an audio interface remove unwanted noise from edited dialogue?

No. The interface features described here relate to connections, playback, levels and routing. The European Broadcasting Union recommends loudness measurement for comparing programme loudness; a headphone connection doesn’t process the file.

How do I set up a separate headphone mix?

According to Audient, you can assign the headphone output to a cue mix on the iD14 MKII using the routing matrix in the iD app. Set the level low before listening: Audient warns that ‘DAW thru’ bypasses the volume control for this output.

Are two headphone sockets enough for two people to hear different signals?

Not necessarily: the number of sockets alone doesn’t tell you whether separate mixes are possible. For the specific interface, check both the independent level controls and the documented signal assignment.

What should I check when using drivers on different office computers?

Check the operating system and installation permissions at each workstation against the manufacturer’s information for the specific model. For the SSL 2+ MKII, Solid State Logic lists a dedicated ASIO/WDM driver for Windows; also check the USB connection, cable and power supply.