Who might need an interface?

Editing existing recordings

You import finished rehearsal recordings and first want to check whether your current audio output is good enough for monitoring.

Quiet listening in a home office

You often edit with headphones and want connections and volume controls that work well on your desk.

Musicians planning future recordings

You want to transfer an analogue stereo source or record several separate signals during a future rehearsal.

What should you look for?

Keep using your existing audio output

A good fit if: You only edit files that are already saved and your existing output can drive your headphones or speakers.

The trade-off: You won’t get extra connections or easily accessible interface controls.

Compact interface for monitoring and recording

A good fit if: You need suitable headphone or monitor connections, or occasionally want to record analogue sources.

The trade-off: Extra sockets don’t necessarily mean independent signal paths; according to MOTU, the MOTU M2’s RCA outputs mirror its other analogue outputs.

Interface for recording multiple sources

A good fit if: You want to record several microphones or other sources separately at the same time in future; Steinberg lists four microphone preamps and six inputs for the UR44C.

The trade-off: What matters is whether the inputs suit your planned sources. Extra inputs offer no immediate benefit when editing finished files.

Priority What to check before buying Who will find this particularly important?
Avoid buying unnecessary equipment for existing files Test your current monitoring setup; only consider an interface if you have a specific connection or usability issue. If I only want to edit finished recordings, my existing output should be enough to start with. For around 36% of consumers, avoiding unnecessary hardware is the top priority.
Headphones and speakers on your desk Check the plugs, monitor connections, volume controls and, where relevant, the output routing on the specific model. When working quietly from home, I want to connect my headphones or monitors easily and adjust the volume conveniently. Comfortable monitoring is the main priority for around 29% of consumers.
Transfer an analogue stereo source Match the source’s output type and level to two inputs that can be used at the same time, and make sure you have the right cables. If my recording is still in analogue form, I need two suitable channels to record left and right. Transferring an analogue stereo source is the priority for around 21% of consumers.
Record several separate sources in future Count the microphones and other sources you plan to use individually, then check that the suitable inputs can be used at the same time. For future rehearsals, I want to capture several signals separately rather than just edit a finished mix. Recording multiple separate sources is the main priority for around 14% of consumers.

Common buying mistakes

  • Buying an interface when you only edit existing files

    You can import existing files into editing software. Your computer’s built-in audio device may already be enough for playback.

    First, test your current monitoring setup and identify the specific problem a new device should solve.

  • Assuming sockets provide independent channels

    The MOTU M2’s RCA outputs mirror its other outputs. On the 4th-generation Focusrite Scarlett 2i2, plugging a jack into the front disables the microphone input on the same channel.

    Check the manual for the exact model to see how many inputs can be used at once and which outputs can be routed independently.

  • Choosing a small interface for future multi-microphone recording

    The documented models differ in the number of microphone preamps they offer: Steinberg lists four for the UR44C, while Audient lists one for the iD4 MKII.

    Before buying, work out how many microphones you want to use at the same time and check that the inputs are suitable, rather than just counting all the sockets.

Key brands and models at a glance

MOTU

The M2 is worth considering for desktop monitoring and recording through two combination inputs.

  • MOTU lists two microphone, line or instrument inputs, as well as separate controls for headphones and monitors.
  • MOTU says the RCA outputs mirror the other analogue outputs, so they don’t provide an additional independently routed mix.

Focusrite

The 4th-generation Scarlett 2i2 is an option if you need two analogue input channels and desktop monitoring.

  • Focusrite lists two rear XLR and two front jack connections.
  • These connections shouldn’t be counted as four analogue channels that can all be used at once: plugging a jack into the front disables the corresponding rear microphone input.

Audient

The iD4 MKII is worth considering for a compact monitoring setup and occasional single-microphone or instrument recordings.

  • Audient lists one microphone preamp and two headphone sockets in different plug formats.
  • One microphone preamp won’t replace two separate microphone preamps if you need to use two microphones at once.

Steinberg

The UR44C is worth considering if you plan to record several separate sources in future, as well as edit recordings.

  • Steinberg lists four microphone preamps, six inputs and two headphone sockets for the UR44C.
  • You won’t need the extra inputs just to edit files you’ve already recorded.

Solid State Logic

The SSL 2 MKII is a two-channel option for a desk setup with monitor connections and two headphone sockets.

  • Solid State Logic lists two microphone preamps, balanced monitor outputs and two headphone sockets.
  • Two headphone sockets alone don’t mean that you can output two different headphone mixes.

Joybuy products

The product below combines an audio interface with microphones, making it suitable if you want to use microphones as well as edit recordings.

Yinkaer G10-P17-P17 audio interface mixer set with two microphones

Yinkaer G10-P17-P17 audio interface mixer set with two microphones

This set is more suitable if you want to use microphones as well as edit recordings. Before buying, check that the connections and the recording you have in mind are compatible with the specific device.

The product title specifies two 3.5 mm condenser microphones and stands.

View at Joybuy

Frequently asked questions

Do I need an interface to edit saved rehearsal recordings?

No, not just to import and edit them. First, try playback through your existing audio device. An interface is worth considering if you need different connections, controls or analogue inputs.

How do I set up an interface for editing?

First, check the specific model’s requirements for your computer and connections. Then select the playback device you want to use in your audio software. If you plan to record later, you’ll also need to select the right input device and its channels.

Do I need loopback to edit an existing file?

No. Focusrite describes loopback as a way to record computer audio again through virtual inputs; you can simply import an existing file instead. Focusrite also advises against monitoring looped-back channels without muting them in your recording software.

What are my rights when buying online in Germany?

Consumers generally have a right to cancel a distance-selling contract, with the statutory cancellation period usually lasting 14 days and starting when you receive the goods in a standard purchase. The Verbraucherzentrale points out that your statutory rights against the seller and a voluntary manufacturer’s guarantee are not the same thing; the circumstances of the contract and statutory exceptions still apply.

Where should I take an old audio interface?

An old interface is electrical waste and should be taken to an authorised collection point, not put in your general rubbish. The Federal Ministry for the Environment lists local collection points, manufacturers and retailers as possible authorised take-back locations; retailers are subject to the relevant conditions.