Which setup is right for you?

Mixing quietly at a shared desk

If you mainly check your short-film music on headphones, you’ll want a monitor output that’s easy to reach and a volume control you can adjust precisely, so speakers don’t disturb anyone else at the desk.

Mixing with several monitoring options

If you switch between headphones and monitors, or want to send a different mix to additional outputs, check which signals can actually be assigned to each output.

Composing and recording occasionally

If you also record instruments or use microphones alongside existing tracks, make sure the interface has the right inputs for all the sources you need to record at the same time.

What should you look for?

Start by checking the monitoring options you need, then make sure the interface suits your computer and workspace, and finally check the inputs for any additional recording.

What you need What to check before buying Who should pay particular attention?
Headphone monitoring Check the headphone socket, plug type and how easy it is to adjust the level. If you need separate signals, check how they’re assigned. If I mainly mix on headphones at a shared desk, I need a monitor level that’s easy to reach and control. This is the top priority for around 36% of consumers.
Separate monitoring options Count the line outputs and headphone sockets separately, and check which mix can be assigned to each output. If I want headphones and monitors to receive different signals, the actual routing matters more to me than the number of sockets. Separate monitoring options are the top priority for around 29% of consumers.
Computer and workspace Check the operating system, connections, cables needed and power supply against the computers you plan to use. If I’m using a shared or changing workspace, I check the computer requirements and available space in advance. This is the main consideration for around 21% of consumers.
Inputs for recording List the microphone, instrument and line sources you plan to use, then compare them with the number of inputs available for simultaneous use. If I’m also recording microphones or instruments, I want to be able to connect the right signal types and all the sources I’m using at the same time. Additional recording is the top priority for around 14% of consumers.

Common mistakes when choosing

  • Assuming two headphone sockets mean two independent mixes

    Having several sockets doesn’t automatically mean they can receive different signals. RME describes the two headphone sockets on the Babyface Pro FS as parallel, while Audient’s documentation says you can assign a cue mix to the headphone output on the iD14 MKII.

    Check the routing guide for the exact model rather than just counting the sockets.

    If the routing you need isn’t available, you may need additional monitoring equipment.

  • Comparing only the inputs when your main task is mixing

    When you’re working with existing software tracks, the monitoring options you need may matter more than extra microphone preamps. First, count all the outputs you want to use at the same time, then check whether you’ll actually be recording new sources.

    Extra recording features won’t solve a monitoring problem; if you don’t have enough outputs, you may need a different hardware setup later.

  • Assuming a USB-C socket guarantees compatibility

    The connector alone doesn’t confirm that the operating system, power supply and setup will work with your computer.

    Check the requirements for every computer you plan to use and see whether the right cables are included.

    An unsuitable cable or power supply can mean extra setup work.

Brands worth considering

Focusrite

The 4th-generation Scarlett 4i4 is designed for compact setups that need extra inputs and outputs.

  • Focusrite says it provides separate mixes for headphones and line outputs.
  • This routing information applies to the model and generation mentioned.

Audient

According to Audient, the iD14 MKII has four line outputs and lets you assign a cue mix to the headphone output.

  • Cue assignment can be useful if you need a separate headphone mix.
  • Audient warns that ‘DAW thru’ bypasses the output’s volume control and can be very loud. Two headphone sockets alone don’t prove that the interface can provide two independent mixes.

MOTU

MOTU lists several line outputs on the M4, along with inputs for occasional microphone, instrument and line recordings.

  • The manufacturer lists four balanced line outputs.
  • It specifies one stereo headphone output; that alone doesn’t indicate a separate additional headphone mix.

PreSonus

The Studio 24c is a compact option for a pair of stereo monitors, headphones and suitable recording sources.

  • PreSonus lists two balanced main outputs and one headphone output.
  • If you need more physical line outputs, look for a different connection layout. If you need an independent headphone mix, check how signals can be assigned on the specific model.

RME

According to RME, the Babyface Pro FS lets you route signals to physical outputs using TotalMix FX.

  • RME describes routing that can be assigned separately to physical outputs.
  • The two headphone sockets are wired in parallel, so they don’t provide two separate headphone mixes.

Related products at Joybuy

The products below are for additional microphone recording or USB audio playback through headphones and RCA outputs. Before buying, check that each device offers the recording and routing features you need for your short-film music.

Yinkaer G10-P17-P17 podcast kit with two microphones

Yinkaer G10-P17-P17 podcast kit with two microphones

If you want to record with additional microphones, the product name lists two condenser microphones and an audio mixer.

Includes: two 3.5 mm condenser microphones and disc stands.

View at Joybuy
Yinkaer G10-P17 podcast microphone kit with audio mixer

Yinkaer G10-P17 podcast microphone kit with audio mixer

If you want to record an additional microphone source, this kit is described as a microphone and mixer set.

Includes: 3.5 mm condenser microphone and G10 audio mixer. The product description says the microphone is compatible with PC and Mac.

View at Joybuy
Nobsound Q4 USB audio gaming DAC with headphone amplifier

Nobsound Q4 USB audio gaming DAC with headphone amplifier

If you want to play USB audio through headphones or RCA outputs, this device is described as a DAC and headphone amplifier. It isn’t listed as an audio interface with additional recording inputs.

Features include an optical input, RCA outputs and 24-bit/192 kHz. Check whether you need playback rather than additional recording and routing inputs in your signal chain.

View at Joybuy

Frequently asked questions

Do I actually need an audio interface for film music that’s already been recorded?

Not just for mixing. If your existing headphone output is enough and you don’t want to connect additional monitors or external equipment, or record new signals, first work out what extra monitoring or connections you actually need.

How do I set up a different headphone mix?

This is only possible if the specific model supports headphone routing. According to Audient, you can assign a cue mix in the system panel on the iD14 MKII. Audient warns that ‘DAW thru’ bypasses the volume control for this output and can be very loud, so turn the level down before switching.

How can I protect my hearing during long headphone mixing sessions?

Keep the volume down and take listening breaks. The World Health Organization points out that volume, duration and frequency of exposure all matter. A more powerful headphone amplifier isn’t, by itself, a measure of quality.

Who is responsible if a product develops a fault after purchase in Germany?

Your statutory rights are with the seller; these are separate from any voluntary manufacturer’s or retailer’s guarantee. If a product is faulty, the first option may be to have it repaired or replaced. Also check what any guarantee on offer covers.

Does an audio interface need to carry a CE marking?

That depends on whether the relevant harmonised EU rules require CE marking for the specific product. The European Commission sets out the EMC Directive 2014/30/EU. Check the product version in the listing and the marking requirements that apply to it.