Who is an audio interface for?

Editing guitar tracks on headphones

If you edit or mix existing recordings at a shared desk, first check whether your current playback setup is good enough. An interface is worth considering if you need recording connections or a suitable way to connect headphones and speakers.

Recording with two microphones

To record two microphone signals at the same time, you need two genuinely usable microphone preamps. Focusrite describes the Scarlett 2i2 4th Gen as having two microphone preamps, so don’t assume that every socket counts as a separate recording channel.

Connecting a microphone and a guitar pickup

If you want to record a microphone alongside an instrument connected directly to the interface, check that it has both the right inputs and the monitoring setup you need while playing. Audient lists one microphone preamp, one instrument input and a monitor mix for the iD4 MKII.

What should you look for when buying?

First decide whether you’ll only be editing existing files or recording new signals. Then you can choose the inputs and monitoring setup you actually need.

What you need What to check before buying Who is it important to?
Using headphones at a shared desk Check the headphone output and volume control you already have. If you’ll be monitoring together, look for independently adjustable outputs. If I’m editing existing tracks at a shared desk, I want to monitor comfortably on headphones. Around 36% of consumers put headphone monitoring first when editing.
Two microphones at the same time Check for two usable microphone preamps. If your microphones need it, make sure the interface provides suitable phantom power. If I want to record two microphone signals at the same time, I need two suitable microphone inputs. Around 29% of consumers prioritise recording two microphone tracks.
Microphone and guitar pickup Check whether the microphone and instrument inputs can be used at the same time on separate channels. If I want to record a microphone and my guitar’s pickup together, both signal paths need to suit my setup. Around 21% of consumers prioritise this combination.
Recording and computer workflow Check operating system and driver support for the specific model. If you’re monitoring through software, pay attention to the signal path and buffer settings. If I switch between playing and editing, I want the interface and DAW to work with my computer without an audible duplicate input signal. Around 14% of consumers prioritise this workflow.

Common buying and usage mistakes

  • Assuming four sockets mean four inputs can be used at once

    On the Scarlett 2i2 4th Gen, plugging into a front jack socket disables the corresponding rear microphone input. So the sockets don’t give you four independent recording channels.

    Count the microphone preamps you can use at the same time and check the channel layout of the specific model.

  • Assuming two headphone sockets give you two independent monitoring paths

    The Audient iD4 MKII has headphone sockets in two formats. However, two sockets alone don’t mean you get separately adjustable headphone outputs; SSL explicitly lists separate controls for the SSL 2+ MKII.

    If you want to monitor together, check that the specific model has independent level controls and the headphone connectors you need.

  • Confusing direct monitoring with DAW monitoring

    Direct monitoring routes the input signal around the software. If you can also hear a delayed signal from the DAW, you may get an echo.

    Choose how you want to monitor while playing. If you can hear both signals at once, turn off duplicate input monitoring in your DAW.

  • Paying for recording features you don’t need just to edit files

    An audio interface connects external sources such as microphones and instruments to your computer. If you’re not connecting new signals, you may not need this recording pathway to edit existing files.

    First try your current editing and headphone setup. Only choose an interface if there’s a specific feature you’re missing.

Key brands to consider

Focusrite

The Scarlett 2i2 4th Gen is an option for recording with two microphone channels and hands-on level control.

  • Focusrite lists Auto Gain, Clip Safe, and mono and stereo direct monitoring.
  • The front jack and rear XLR inputs don’t give you four recording paths you can use at the same time: plugging into a front jack disables the corresponding microphone input.

Audient

The iD4 MKII is designed for a setup with one microphone and one instrument signal.

  • Audient lists one microphone preamp, one instrument input and a monitor mix. The headphone connections come in two formats.
  • There’s only one microphone preamp. Two headphone sockets don’t automatically mean two independently adjustable monitoring paths.

MOTU

The M2 has two microphone or instrument inputs, with clear displays showing input and output levels.

  • MOTU lists phantom power that can be switched on separately for each input.
  • Check the operating system requirements against your computer before buying. A claimed speed advantage isn’t proof of an independent comparison.

Arturia

The MiniFuse 2 is a two-input option if you also need MIDI, a USB hub and a mix control for monitoring.

  • Arturia lists MIDI, a USB hub and monitoring features among its specifications.
  • These features aren’t a comparative assessment of sound quality. Check whether you’ll actually use the extra connections in your setup.

Solid State Logic

The SSL 2 MKII and SSL 2+ MKII both have two inputs. The 2+ MKII is worth considering if you need two separately adjustable headphone outputs.

  • Solid State Logic lists two independent headphone outputs with separate volume controls for the SSL 2+ MKII.
  • The extra monitoring path doesn’t change the fact that this model has two recording input channels. The manufacturer’s general claims of superior sound aren’t independently verified by this feature.

Suitable products at Joybuy

Suitable products coming soon.

Frequently asked questions

Do I need an audio interface for guitar tracks I’ve already recorded?

Not necessarily. An audio interface is mainly used to connect microphones and instruments to a computer for recording. If you’re only editing existing files, first check whether your current playback setup works well with your headphones.

How can I avoid an echo in my headphones while playing?

If you’re monitoring the input signal directly through the interface, turn off software input monitoring in your DAW as well. Focusrite explains that you may hear an echo if direct monitoring and the delayed DAW signal are both played at once.

What should I bear in mind when setting up and using an interface at a shared desk?

Check that your specific interface is supported by your operating system and drivers, then select the right audio device in your DAW. For Ableton Live, Ableton recommends ASIO on Windows and Core Audio on macOS. A smaller buffer size can reduce latency, but it increases CPU load.

What are the returns and disposal rules in Germany?

For a distance contract with a consumer, there is generally a statutory right to cancel. For goods, the period is usually 14 days from receipt, subject to statutory exceptions and the specific cancellation information provided. The Federal Ministry of Justice and the Federal Office of Justice explain the legal basis, while the consumer advice centre describes the time limit. According to the Federal Environment Agency, electrical waste must be collected separately and not put in household rubbish.

Is the CE mark an independent EU safety test?

No. The European Commission explains that the CE marking indicates the manufacturer’s declaration that the product complies with the applicable EU rules. It isn’t a general safety approval from a government authority.