Which interface is right for you?

Headphone mixing at a shared desk

You mostly mix existing DAW tracks on your own and want to adjust your headphone level directly on the interface, without having to use speakers all the time. Bonedo says that a main output and a headphone output are enough for many electronic music productions. The World Health Organization notes that both volume and listening time affect the risk to your hearing.

Producers with hardware synths

You’d like to record external sound sources occasionally or connect them via MIDI. What matters is which inputs and outputs you need to use at the same time; MOTU and Steinberg list MIDI connections on the models covered here.

Mixing with multiple monitoring paths

You need additional outputs alongside your regular stereo monitoring, each of which can be fed independently. RME describes the Babyface Pro FS as offering flexible signal routing. Still, check the routing features of the specific model rather than judging by the number of sockets alone.

What to look for when choosing

What matters when buying What to look for Who it matters most to
Headphone monitoring Check the connection and plug type, make sure the level control is easy to reach, and check the specifications for the headphones you use. Set the volume so you don’t have to listen unnecessarily loudly for extended periods. If you mostly mix on headphones at a shared desk, you’ll want to be able to adjust the level easily. Around 39% of consumers put headphone monitoring first.
Synthesizers and MIDI Check that the mono or stereo inputs you need, the line level and, where applicable, five-pin MIDI In/Out are compatible with your devices. If you want to record a hardware synth or connect a device via MIDI, the right connections and the number of inputs you can use simultaneously are key. Around 23% of consumers prioritise hardware connectivity.
Independent monitoring paths Check the manual to see which physical outputs can be addressed independently and whether the headphone output mirrors the monitor signal. If you want to monitor different signals at the same time, you’ll need genuinely separate signal paths, not just a second volume control. Around 15% of consumers prioritise independent routing.
Space and computer connection Check the dimensions of the unit, including the space needed for connected cables, its USB connection, and the manufacturer’s current operating system and power requirements. If you share your desk or have limited space, you’ll want to fit the interface and cables in comfortably and make sure it can connect to your computer. Around 23% of consumers prioritise space requirements and computer connectivity.

Common buying mistakes

  • Confusing two volume controls with two independent monitor mixes

    According to Arturia, the MiniFuse 2’s headphone output mirrors the monitor signal, even though it has its own level control. A separate control doesn’t necessarily mean a separate signal path.

    If you want to monitor different signals at the same time, check the signal routing in the manual for the exact model version.

  • Assuming the highest bit depth and sample rate are the main benefits for mixing

    A maximum resolution specification doesn’t tell you whether the connections, controls and computer compatibility are right for your setup. On its own, it’s not an independent listening comparison either.

    Start by checking the signal path you actually use and the features you need against the manufacturer’s specifications.

  • Buying lots of inputs just in case, when you only mix in a DAW

    If you only mix existing tracks on your computer, extra recording inputs may go unused. Bonedo says that a main output and a headphone output are usually enough for electronic music made entirely in the computer.

    Before choosing, count the external devices you actually want to connect or record at the same time.

Key audio interface brands at a glance

Focusrite

The 4th Generation Scarlett 2i2 offers compact stereo monitoring, with separate controls for the main and headphone levels.

  • Focusrite lists two balanced line outputs on the rear and a headphone output on the front.
  • Two playback channels don’t provide additional stereo monitoring paths that can be routed independently. Specifications for the 4th Generation don’t automatically apply to older Scarlett models.

MOTU

The M2 combines two combo inputs and MIDI In/Out with stereo line outputs and a front-panel level display.

  • MOTU lists separate level controls for the monitor and headphone outputs.
  • The manufacturer’s latency figure applies only under the stated driver, buffer and sample rate conditions; it isn’t an independent comparison with other models.

Arturia

The MiniFuse 2 offers two inputs, MIDI In/Out and a USB hub for compatible peripherals.

  • Arturia says the headphone output has its own volume control.
  • The headphone output mirrors the monitor signal. The hub and MIDI connections are only useful if you need them for your devices.

Steinberg

The UR22C is a 2-in/2-out interface with MIDI In/Out and a monitor mix, designed for production and occasional recording.

  • Steinberg specifically describes Loopback as a feature for streaming.
  • The maximum resolution quoted doesn’t, by itself, prove an audible benefit when mixing an existing track.

RME

The Babyface Pro FS is worth considering if you need TotalMix FX for routing, additional monitoring options or expandability.

  • RME describes flexible signal routing and a switchable output level for sensitive active monitors.
  • These features aren’t necessarily needed for a single pair of headphones and one stereo pair of speakers. They don’t establish that the unit has generally superior sound quality.

Audio interfaces at Joybuy

Related products coming soon.

Frequently asked questions

Do I need two mic preamps for a dance track that’s already been recorded?

Not if you’re only mixing existing DAW tracks. First decide which headphone and monitor outputs you need; extra inputs are useful if you want to record external signals.

Can I connect headphones and speakers and hear two different mixes?

Not necessarily. According to Arturia, the MiniFuse 2’s headphone output mirrors the monitor signal, even though it has its own level control. If you want separate mixes, check the independent routing options for the exact model version.

What should I bear in mind when setting up and mixing for long sessions?

Check that the USB connection, power supply and operating system meet the manufacturer’s requirements for the specific interface. Start with your headphones set to a low volume and take listening breaks: the World Health Organization notes that volume and listening time together affect the risk to your hearing.

Who is responsible if a product develops a fault after purchase in Germany?

For a consumer purchase from a business seller, the seller is generally responsible for the statutory guarantee. According to the European Union’s Your Europe website, goods bought in the EU are covered for a minimum of two years from receipt; a purchase from a private individual isn’t covered in the same way. An additional manufacturer’s warranty doesn’t replace your statutory rights.

Which product requirements apply when buying in Germany?

Devices sold in the EU must comply with the relevant product safety rules. For the specific device, check whether the applicable EU rules require a CE marking and what information the manufacturer provides. The CE marking isn’t an independent sound quality test.