Solo mixer at a shared desk
You mainly mix existing jazz tracks on headphones and want to be able to adjust the speaker volume separately when needed.
For mixing existing jazz tracks at a shared desk, a model with a practical headphone output and stereo monitor output may be enough if you’re listening on your own and don’t need a separate mix for someone else. If you need two headphones carrying different signals, or two pairs of monitors, genuinely separate outputs and documented routing matter. Extra inputs are mainly relevant if you also want to record. Check the connections, computer compatibility and, where applicable, USB power requirements for the specific model.
You mainly mix existing jazz tracks on headphones and want to be able to adjust the speaker volume separately when needed.
You want to listen to the mix on two pairs of headphones at the same time, or one person needs their own cue mix.
You compare the mix on two pairs of speakers or need extra output paths, and are happy to set up more routing.
First decide which signals you want to hear at the same time. Then check the outputs you’ll need, how they’re assigned and whether the connections are right for your computer.
| What you need | What to check before buying | Who it matters most to |
|---|---|---|
| Mix without disturbing others on headphones | Check the headphone socket and the right plug or adapter, separate volume control and the signal feed. | If I’m mixing alone at a shared desk, I want to adjust the headphone volume without changing the monitor level. Around 36% of consumers would prioritise uninterrupted headphone monitoring above all else. |
| Listen on headphones with another person | Check the number of headphone sockets and volume controls, as well as the documented cue or output assignment. | If someone else is listening, we need suitable headphone outputs at the very least; for different signals, the routing must support this too. Around 29% of consumers would prioritise two headphone outputs for shared listening or a separate cue mix. |
| Switch between pairs of monitors | Check whether there are two independently usable stereo output pairs and how you switch between them. | If I regularly compare my mix on two pairs of speakers, I want to be able to switch between them easily. Around 21% of consumers would prioritise switching between monitor pairs or having extra output paths. |
| Record and connect additional equipment | Check the inputs you can use simultaneously, and make sure the operating system and USB power requirements are compatible with your computer. | If I also want to record instruments or microphones at the same desk, the number of inputs I can actually use at the same time and the computer connection both matter. Around 14% of consumers would prioritise extra recording inputs or integration with their computer. |
According to Focusrite, the headphone and line outputs on the Focusrite Scarlett 2i2 4th Gen share the same signal feed. Arturia also describes the MiniFuse 2 headphone output as mirroring the monitor signal.
If you need to hear different content, check the actual cue and DAW output assignments before buying.
MOTU says the RCA outputs on the M2 mirror the main outputs. By contrast, Audient describes the iD14 MKII as having an additional pair of line outputs with an Alt Speaker setup.
Distinguish between the number of sockets and the number of independently usable stereo output pairs.
You may need a different interface and extra cables for additional monitor outputs.
Arturia warns that passive USB hubs may not supply enough power to the MiniFuse 2. For the Scarlett 4i4 4th Gen, Focusrite specifies an additional power option if your computer doesn’t provide the required USB-C power.
Check the power requirements of the exact model against your computer or hub.
Depending on your setup, you may need a powered hub or a suitable additional power supply.
According to Focusrite, plugging a jack into the Focusrite Scarlett 2i2 4th Gen disables the XLR input on the same channel.
If you also want to record, count the channels you can use simultaneously, not just the visible sockets.
The Scarlett 2i2 4th Gen offers one headphone output and one stereo monitor output; choose the Scarlett 4i4 4th Gen if you need extra line outputs.
The M2 is a two-input model with a headphone output, stereo line outputs and a front-facing level display.
The MiniFuse 2 could suit a compact workspace where you need stereo playback and may also want MIDI or a USB hub.
The SSL 2+ MKII is an option if two people each need a headphone connection with their own volume control.
The iD14 MKII may suit certain setups that need an alternative pair of speakers or an assignable headphone cue.
This selection is for playing a mix from your computer through headphones or connected speakers. A USB DAC isn’t a substitute for an audio interface if you also want to record instruments or microphones.
No image available
Could be suitable for playing a mix from your computer through headphones, or via the RCA output to an amplifier or active speakers.
USB DAC with optical input; specified features include 24-bit 192 kHz, Bluetooth, a headphone amplifier, Treble and Depth controls, and a remote control.
Requires an external DC power supply; according to the product description, use only the appropriate power supply. If you’re buying in Germany, check the compliance information and any required German-language documentation for the specific listing.
For playback alone, the outputs you need for monitoring are what matter. If you might record instruments or microphones later, count the sources you’ll need to record at the same time; recording a band or drums may require more inputs.
Audient explains how to connect the pairs to line outputs 1/2 and 3/4, then assign 3/4 as Alt Speaker in the iD software. According to Audient, you can then assign switching to an iD button; check the levels before listening.
Arturia warns that some passive USB hubs don’t supply enough power to the MiniFuse 2; in this case, the manufacturer recommends using a powered hub. For the Scarlett 4i4 4th Gen, Focusrite specifies an additional power option if your computer doesn’t provide the required 1.5 A over USB-C. These recommendations apply to the models mentioned.
For relevant electrical and electronic products, Germany’s Federal Network Agency lists a correctly applied CE mark, product identification and required accompanying documents, such as German-language operating and safety instructions, among the points to check. Check the information for the specific listing; the CE mark is not a recommendation of sound quality.
Your statutory rights against the seller are separate from a voluntary manufacturer’s or retailer’s guarantee. According to EU consumer information, you’re generally entitled to a minimum two-year legal guarantee from the date you receive the goods; if a product is faulty, repair or replacement are the first remedies to consider.