Which interface is right for you?

Mixing on headphones at a small desk

If you mainly edit existing piano recordings using headphones, look for easily accessible sockets and controls, as well as enough room for the cables. Focusrite user guides, MOTU and Audient document different connection and control layouts for their respective models.

Mixing with nearfield monitors

If you switch between headphones and a pair of speakers, the outputs and signal routing need to work with your monitors. Focusrite user guides and Arturia describe the connections and routing features of their respective models.

Pianists who also record

If you sometimes want to record a digital piano or other sources as well as mixing, check which inputs can be used at the same time. Focusrite user guides show how to connect a stereo keyboard to two line inputs on the Scarlett 2i2 4th Gen, and list two additional rear line inputs on the Scarlett 4i4 4th Gen.

What should you look for when buying?

For recordings you already have, focus on the right playback connections. Extra inputs become important if you want to record the piano itself or connect other sources.

Compact 2-in/2-out interface

A good fit if: you mainly mix on headphones and, at most, one pair of speakers, or occasionally record a stereo keyboard using two inputs.

Bear in mind: On the Scarlett 2i2 4th Gen, the stereo keyboard's two line signals use inputs 1 and 2.

More inputs and separate mixes

A good fit if: you want to connect other analogue sources as well as a stereo instrument, or create different mixes for your headphones and monitors. Focusrite documents this separate routing on the Scarlett 4i4 4th Gen.

Bear in mind: You'll need to set up the extra routing options in the accompanying software.

Small interface designed for headphone use

A good fit if: a small footprint and headphone use matter more to you than connecting several microphones at once. Audient lists the iD4's footprint as 13 × 12 cm.

Bear in mind: Audient lists one microphone preamp for the iD4. Two headphone sockets don't automatically mean you can create two separate mixes.

Buying criterion What to check before buying Who is this important to?
Headphones and space Check the plug type, whether the volume control is easy to reach, the space needed for the unit and its cables, and the USB power requirements. If I'm mixing on headphones at a small desk, the socket and control need to be easy to reach, and there must be room for the cables. For around 33% of consumers, headphone use and space are the top priorities.
Speaker connections Check your monitors' connections, the right output plugs and the actual signal routing. If I'm mixing on nearfield monitors, the left and right outputs need to work with my pair of speakers. For around 25% of consumers, speaker connections are a priority.
Stereo recording Check the digital piano's audio outputs and the right cables; don't mistake MIDI connections for audio inputs. If I also want to record my digital piano in stereo, both audio signals need to reach suitable inputs at the same time. For around 25% of consumers, stereo recording is the top priority.
Separate mixes Check the manual for the exact model to see whether you can send different mixes to your headphones and monitors. If I want to hear something different through my headphones from what I'm hearing through the speakers, I need separate mixes, not just independent volume controls. For around 17% of consumers, this routing is the deciding factor.

Common misconceptions

  • Extra sockets mean extra mixing options

    Not necessarily. MOTU says the M2's RCA outputs mirror the analogue output pair. On the Arturia MiniFuse 2, the headphone output mirrors the monitor signal, even though it has its own volume control.

    If you want to send different signals to your headphones and speakers, check the mixing and output routing on the exact model.

  • Microphone and line sockets are always additional channels

    On the Focusrite Scarlett 2i2 4th Gen, plugging into a front line input disables the corresponding rear XLR microphone input.

    For your set-up, count the inputs that can actually be used at the same time, not just the visible sockets.

  • A USB-C connection guarantees the right power supply

    The plug type alone doesn't tell you whether your computer's connection can meet the interface's power requirements. Focusrite lists a separate 5-V power input for the Scarlett 4i4 4th Gen.

    Check the power requirements of the specific model and the power available from your computer's connection. Depending on the connection, you may need an additional 5-V power supply.

Key brands at a glance

Focusrite

The Scarlett models vary in their inputs and routing, so choose the one with connections that suit your set-up.

  • Focusrite user guides list extra rear line inputs and separately assignable mixes on the Scarlett 4i4 4th Gen.
  • On the Scarlett 2i2 4th Gen, using a front jack input can disable the corresponding rear XLR microphone input.

MOTU

The M2 is a possible option for a compact workspace, with two combo inputs, MIDI and an on-unit level display.

  • MOTU lists separate monitor and headphone volume controls, as well as a display for input and output levels.
  • MOTU says the RCA outputs mirror the analogue output pair, so they don't provide an additional independent mix.

Arturia

The MiniFuse 2 combines two inputs with MIDI and a USB hub.

  • Arturia lists MIDI input and output, a USB hub and a dedicated headphone volume control.
  • Arturia says the headphone output mirrors the monitor signal; a separate volume control doesn't mean you can create a separate mix.

Audient

The iD4 is designed for a small footprint and headphone use.

  • Audient lists a footprint of 13 × 12 cm and two headphone sockets.
  • Audient lists one microphone preamp for this model; two sockets don't mean there are two independently mixable headphone outputs.

Steinberg

The UR22C combines audio connections with MIDI and a monitor mix function described by the manufacturer.

  • Steinberg lists two inputs and outputs, as well as MIDI input and output.
  • The documented loopback function is for streaming and isn't automatically relevant if you're simply mixing piano files you already have.

RME

According to the manufacturer, the Babyface Pro FS offers extensive routing for a mobile set-up.

  • RME describes two parallel headphone outputs with different driver stages.
  • The extra routing features are only relevant if you actually need them in your workflow.

Joybuy products

Similar products will be available soon.

Frequently asked questions

Do I need two microphone inputs for piano files I've already recorded?

No, not just to play and mix files you already have. If you later want to record a stereo keyboard via an analogue connection, Focusrite shows how to connect it to the Scarlett 2i2 4th Gen using two mono line inputs. Check the audio outputs on your instrument.

How do I connect a digital piano in stereo?

Connect the instrument's left and right audio outputs to two separate inputs. Focusrite shows this connection for the Scarlett 2i2 4th Gen; for line signals, Instrument mode should be switched off. Also check the channel assignment in your recording software.

How do I connect speakers to an interface?

Connect the interface's left and right outputs to the corresponding inputs on your monitors. Focusrite lists rear L and R outputs on the Scarlett 2i2 4th Gen, and balanced 6.35-mm TRS cables for monitors with compatible inputs. Remember to allow space on your desk for the plugs and cables.

Is a dedicated headphone volume control enough for a separate mix?

No, having a dedicated volume control doesn't prove that you can send different signals to your headphones and monitors. Check the routing features of the exact model. Focusrite documents separate mixes for monitors and headphones on the Scarlett 4i4 4th Gen.