Which setup is right for you?

Solo speakers with varying volume

You’re recording one voice and want to set and monitor your levels for quiet and loud passages before the actual take.

Duos recording separate microphone tracks

You’re speaking at the same time and need two usable microphone preamps, not just two inputs of any kind.

Anyone recording in different rehearsal rooms

You set up your equipment in different places and need to make sure the headphone connection, computer connection and power supply work together on site.

What should you look for when buying?

First decide how many microphones you want to record at the same time. Then check the level controls, monitoring options and power supply for the rehearsal room you’ll be using.

Buying criterion What to check Who is this particularly important for?
Sudden changes in volume Check the microphone input and level meter. Only consider automatic gain assistance or 32-bit float if your recording software supports the relevant workflow. When I’m recording quiet verses and emphatic passages, I want to check the level at the loudest point. Around 33% of consumers prioritise managing these changes in level.
Two microphone tracks Count the microphone preamps that can be used at the same time, and check that the phantom power you need is compatible with your microphones. When two people are speaking at the same time, I want to record each voice with its own microphone. Around 27% of consumers prioritise two separate microphone tracks.
Monitoring and room sound Check for a headphone connection and Direct Monitoring or Monitor Mix. Listen to a test recording made from the planned speaking position. When I’m recording in a rehearsal room, I want to monitor the voice and assess how the room sounds at the same time. Around 20% of consumers prioritise monitoring and room acoustics.
Connection and power Check compatibility with your operating system, software and drivers, as well as the USB cable and requirements of the computer connection you’ll actually use. When I’m setting up in different rehearsal rooms, I want to be able to connect the interface reliably to whichever computer I’m using. Around 20% of consumers prioritise a setup that works in different locations.

An interface can’t remove room reflections from a recording. Shure points out that a microphone can’t effectively distinguish direct sound from reflected sound. A test recording can therefore help you assess the microphone position and room sound.

Common misconceptions

  • “Two inputs” doesn’t automatically mean “two microphones”

    On the Audient iD4 MKII, one of the two analogue inputs is an instrument input; it doesn’t replace a second microphone preamp.

    Count the microphone inputs you can use at the same time, rather than looking only at the total number of inputs.

  • 32-bit float or automatic gain won’t eliminate echo in a rehearsal room

    Level controls and recording features affect how the signal is captured. They don’t stop a microphone from picking up room reflections.

    Before relying on a particular format or automatic feature, test the interface with a recording made from the planned microphone position.

  • A USB-C plug doesn’t guarantee sufficient power

    Requirements vary by model and computer connection. Audient specifies at least 0.9 A at 5 V from a USB 3.0 port for the iD4 MKII; Focusrite documents an optional additional 5 V power supply for the Scarlett 2i2 4th Gen.

    Check the exact model’s requirements against the connection you’ll actually use in the rehearsal room.

Key brands at a glance

Focusrite

The Scarlett Solo 4th Gen is designed for one XLR microphone, while the Scarlett 2i2 4th Gen has two microphone inputs. Focusrite also documents Auto Gain and Clip Safe for the 2i2.

  • The 2i2 4th Gen’s level-assistance features can be useful when setting up for a speaker whose volume varies.
  • A Bonedo review notes that the Scarlett 2i2 4th Gen doesn’t let you adjust the Direct Monitoring mix and doesn’t have MIDI I/O.

Audient

The iD4 MKII combines one microphone preamp with an instrument input and a Monitor Mix. Audient also lists 48 V phantom power and Loopback for this model.

  • Monitor Mix lets you listen directly to the input signal.
  • The instrument input isn’t a second microphone preamp, so this input configuration isn’t enough to use two XLR microphones at the same time.

MOTU

MOTU lists two inputs for the M2, each of which can take a microphone or guitar, along with independent gain controls, 48 V phantom power and Direct Monitoring.

  • The independent gain controls and on-device level meters are useful when setting your recording levels.
  • Manufacturer latency figures are based on specific conditions and aren’t a general guide to performance on every computer.

Zoom

Zoom describes the UAC-232 as an interface with two XLR/TRS combo sockets and a 32-bit float recording path. It also lists Direct Monitoring and 48 V phantom power.

  • Its recording path may be worth considering if your volume varies considerably and you have a compatible 32-bit float workflow.
  • The feature depends on support from the software you’re using, so check the recording path with your own setup.

RØDE

The RØDECaster Duo combines two microphone combo sockets with additional signal paths, including wireless, headset, Bluetooth and USB connections.

  • The additional signal paths may be useful if your setup includes sources beyond two microphones or live routing.
  • You won’t necessarily need all these extra features for a simple solo voice recording. More signal paths also don’t mean more XLR microphone sockets.

Joybuy products for voice recording

The Joybuy products below are intended for voice recording with an audio interface or sound card.

Yinkaer G10-P17-P17 podcast kit with two microphones

Yinkaer G10-P17-P17 podcast kit with two microphones

This set is sold as an audio interface or sound card for recording on a computer or phone.

The product title lists two 3.5 mm condenser microphones in the set, as well as effects.

If you need two separate XLR microphone tracks, check that the set’s connections and recording path are suitable before you buy.

View at Joybuy

Frequently asked questions

Do I always need 48 V for a condenser microphone?

First, check the power requirements for your specific microphone. If it needs 48 V phantom power, the microphone input you choose must provide it. Focusrite states that the 48 V switch on the Scarlett 2i2 4th Gen powers both XLR inputs.

How can I check a recording before giving the full performance?

First, record a quiet passage and the loudest passage you plan to perform. Watch the input level, then listen to the saved test recording. Direct Monitoring lets you hear the input signal; for the actual recording, you should also listen back to the saved file.

Can I simply remove echo or distracting noises later?

Don’t count on it. Shure explains that a microphone can’t effectively separate direct sound from room reflections. Audacity describes its noise reduction as being mainly for steady background noise, not individual sounds or changing noise. So check the microphone position and room with a test recording.

What rights apply when buying an audio interface online?

According to the European Union’s consumer information, when you buy from a business, you’re generally entitled to at least two years of statutory protection against faulty goods. For a qualifying distance purchase, you generally have 14 days from delivery to cancel. Possible exceptions and information about return costs should be checked separately. This is different from a voluntary manufacturer’s guarantee.

Can I record other people in the rehearsal room and publish the performance?

Get the agreement of everyone involved before recording: section 201 of the German Criminal Code (StGB) makes it an offence to record another person’s non-public speech without authorisation. If you want to make someone else’s protected poem publicly available, section 19a of the German Copyright Act (UrhG) is also relevant. Whether you have the rights to use a particular text and publish it as planned depends on who created it and how you intend to use it.