Who is this selection for?

Working solo at a shared editing desk

You mostly edit existing session tracks through headphones and want to adjust the volume directly on the device, without using speakers that others might need. Audient lists two headphone connections on the iD4 MKII, but the number of connections alone tells you nothing about whether you can create separate mixes.

An editing team listening together

You listen together in a pair or need different monitoring signals. Focusrite says the 4th Generation Scarlett 4i4 can provide separate mixes for headphones and line outputs; Solid State Logic lists two independently controlled headphone outputs on the SSL 2+ MKII.

A mobile editing setup with overdubs

You switch between computers and may want to record additional sources. Check the input types, power supply and system requirements for each model. Focusrite specifies a minimum power requirement of 5 V at 1.5 A for the 4th Generation Scarlett 4i4.

What should you look for when buying?

First, decide whether you’ll only be editing recorded tracks or also capturing new sources. Then check the monitoring options you need and whether the interface will work with the computers you actually use.

What matters when buying What to look for Who should pay particular attention
Direct headphone monitoring Check the plug and headphone socket, how easy the volume control is to reach, and whether the connections are suitable for your existing speakers. If I’m editing existing tracks on my own through headphones and don’t want to use speakers at a shared workstation, direct volume control is my priority. Around 36% of consumers would prioritise solo headphone monitoring as their main buying consideration.
Separate monitoring paths Work out whether two people simply need to hear the same mix at different volumes or actually need different mixes; then check the routing on the specific model. If we’re listening together, I want to know whether we need separate volume levels or different signals. Around 29% of consumers would put shared or separate monitoring first.
Switching between computers Check the operating system, required drivers, USB connection and power supply for every computer you use. Focusrite specifies a minimum of 5 V at 1.5 A for the 4th Generation Scarlett 4i4. If I switch between several computers at a shared workstation, I want to make sure the interface works with each one. Around 21% of consumers would prioritise compatibility with different computers as their main buying consideration.
Additional recording sources Count the microphone, instrument and line sources you’ll need to use simultaneously in future. Don’t assume line inputs are extra microphone preamps. If I sometimes want to record new sources as well as edit, I choose the inputs based on their type and number. Around 14% of consumers would put additional recording sources first.

Avoid common misconceptions

  • Two headphone sockets don’t automatically mean two separate mixes

    The number of sockets, separate volume controls and independently assignable signals are different features. Treating them as the same thing could lead you to choose a model without enough monitoring options for working together.

    Before you buy, decide whether everyone will listen to the same mix or needs different signals, then check the routing on the exact model.

  • Four inputs don’t necessarily mean four microphone inputs

    On the 4th Generation Scarlett 4i4 and the MOTU M4, two of the four analogue inputs are additional line inputs. So the total number doesn’t tell you how many microphones you can connect directly.

    List the microphone, instrument and line sources you’ll need to use simultaneously, then compare them with the inputs on each model.

  • Don’t assume bus power will be enough without checking

    Focusrite specifies a minimum of 5 V at 1.5 A for the 4th Generation Scarlett 4i4. Arturia says the USB hub ports on the MiniFuse 4 only work when the power supply is connected.

    Check the power requirements and the additional features you want to use with the computer you’ll actually be using. If necessary, make sure you have a suitable power supply connection.

Key brands to consider

Focusrite

The 4th Generation Scarlett 4i4 is worth considering if you want headphones and line outputs to receive different mixes.

  • Focusrite describes separate mixes for headphones and line outputs, two microphone preamps and two additional line inputs.
  • The model has one headphone socket; the extra line inputs are not a substitute for additional microphone preamps. Focusrite specifies a minimum of 5 V at 1.5 A, so the supplied power supply is relevant if your USB connection can’t provide enough power.

MOTU

The M4 may suit you if a level meter and additional line connections fit your editing and recording workflow.

  • MOTU lists a level meter, two combo microphone/line/instrument inputs and two additional line inputs.
  • One headphone socket is listed. Manufacturer claims about sound or speed don’t, on their own, prove an advantage over other models.

Solid State Logic

The SSL 2+ MKII is worth considering if two people need to listen at the same time through separately controlled headphone outputs.

  • Solid State Logic’s manual lists two independent headphone outputs with separate volume controls and two recording input channels for the SSL 2+ MKII.
  • The SSL 2 MKII is a different model. Specifications for the 2+ MKII don’t apply to it; if you need different mixes, check the signal assignment too.

Audient

The iD4 MKII is a useful comparison for solo editing with limited additional recording needs; the iD14 MKII offers more connections.

  • Audient lists one microphone preamp, one instrument input and two headphone connections on the iD4 MKII. For the iD14 MKII, Audient also lists ADAT expansion and additional line outputs.
  • The documented bus-powered operation of the iD14 MKII requires at least a USB 3.0 connection with 900 mA. The number of headphone sockets proves neither that separate mixes are available nor that different models offer the same power features.

Arturia

The MiniFuse 4 is a useful comparison for a desk with two pairs of headphones and additional USB devices.

  • Arturia lists four inputs and four outputs, two headphone connections and an integrated USB hub.
  • Arturia says the hub ports only work when the power supply is connected. The listed product specifications alone don’t prove that two different headphone mixes are possible.

Joybuy products

Related products will be available soon.

Frequently asked questions

For a multitrack live recording, do I need as many inputs as there are tracks?

No, not just for tracks that are already stored on your computer. Choose the number and type of analogue inputs based on the sources you want to record simultaneously in future; additional line inputs are not additional microphone preamps.

Does direct monitoring help prevent latency while editing?

Direct monitoring sends a newly connected input signal straight to the monitoring output, so it’s mainly useful when recording. Focusrite describes this signal path for inputs; it doesn’t replace a suitable computer and software setup for tracks already stored in your DAW.

What should I check before using the interface with another computer?

Check the operating system, required driver, USB connection and power supply for the specific model. Focusrite specifies a minimum of 5 V at 1.5 A for the 4th Generation Scarlett 4i4 and recommends using the supplied power supply if the USB connection can’t provide enough power.

Are two headphone connections enough for two people to hear different signals?

No, two connections alone don’t prove that independently assignable mixes are available. Solid State Logic lists two separately controlled headphone outputs on the SSL 2+ MKII; if you need different signals, check the routing on the exact model too.

What does the CE marking tell me about an audio interface?

CE marking is a declaration made by the manufacturer under its own responsibility, not an independent seal of sound quality. The Federal Network Agency lists correct labelling and identifiable manufacturer details among the points it checks when monitoring the market.