Quiet mixers sharing a desk
You share a desk and usually assess your demo on headphones. An easy-to-reach headphone level control and the right connections for your monitors are therefore important.
If you’ll mainly be mixing existing tracks on headphones, an easy-to-reach headphone level control and the right outputs for your monitors matter more than extra recording features. To record vocals and guitar at the same time, you’ll need two suitable inputs; separate headphone mixes or extra microphones call for the right routing or additional inputs. Also check compatibility with your computer and headphones: Focusrite, MOTU and Solid State Logic each list model-specific features and requirements.
You share a desk and usually assess your demo on headphones. An easy-to-reach headphone level control and the right connections for your monitors are therefore important.
You mix existing tracks and also record vocals and acoustic guitar. The key things to consider are how many inputs can be used at the same time and how you’ll monitor while recording.
You’d like to connect two pairs of headphones at the same workstation or listen to different mixes. The outputs and routing need to suit the way you work.
First, decide whether you’ll only be mixing quietly or also recording new sources at the same time. Then check that the computer connection and monitoring options will work for your shared workspace.
| What matters | What to check when buying | Who it matters to |
|---|---|---|
| Quiet, controlled monitoring | Check the headphone socket and level control, as well as the monitor outputs you need. If you’ll be listening together, check the separate level controls and independent mixes individually. | If you usually mix on headphones at a shared desk, you’ll want to adjust the level easily. Around 40% of consumers put quiet, controlled monitoring first. |
| Inputs for additional recording | Check the number and type of microphone, line and instrument inputs you can use at the same time. Phantom power is only needed if your microphone requires it. | If you want to record vocals and guitar at the same time, you’ll need suitable inputs for both sources. Around 30% of consumers prioritise recording vocals and instruments simultaneously. |
| Computer connection | Check your operating system and available connection against the specifications for the exact model. Also consider drivers, adapters and USB power. | If you’re connecting the interface to your computer at a shared workstation, it should be compatible with its connections and operating system. Around 20% of consumers prioritise an easy computer connection. |
| Listening together and expanding your setup | For two people, check the sockets, separate level controls and independent mixes individually. If you plan to add microphones later, find out what additional input route you’ll need. | If you want to monitor together or add more recording sources later, routing and suitable expansion options matter. Around 10% of consumers prioritise separate monitoring or expandability. |
The number of sockets alone doesn’t tell you whether two people can hear different signals. Solid State Logic describes the SSL 12 as offering independent mixes; for other models, check the routing against the way you plan to use it.
Check separately whether the levels can be adjusted individually and whether independent cue mixes are explicitly supported.
Extra routing setup or a headphone amplifier may be needed to expand your shared workstation setup.
On the Audient iD14 MKII, the built-in microphone preamps are separate from the expansion available through the optical input. You’ll need suitable external hardware to record additional analogue sources.
Count the analogue inputs available straight away, then check which input route each planned simultaneous recording will need.
Expanding later via the optical input requires suitable external converters or preamps.
USB connection, power supply and driver requirements vary by model and operating system. So a matching connector type alone doesn’t confirm that the interface will work as intended with your computer.
Before buying, check your operating system and available connection against the manufacturer’s information on drivers and power supply.
Depending on your computer, you may need a suitable adapter or changes to its configuration.
The Scarlett 2i2 4th Gen is a compact two-input option for solo musicians working at a desk.
The M2 is designed for two recording sources and connecting MIDI devices.
The iD14 MKII may suit you if you need two headphone connections at your workstation or want the option of adding digital inputs later.
The SSL 12 is designed for shared sessions with several microphones and different headphone mixes.
The MiniFuse 2 combines two inputs with MIDI and a USB hub.
Not if you’re only playing back and mixing existing tracks. Instead, count the sources you want to record at the same time: two suitable inputs may be enough for vocals and one instrument; you’ll need more inputs for more sources being miked up simultaneously.
Check whether the specific interface offers direct monitoring. If you monitor through your DAW, the buffer size also affects latency: Steinberg explains that a smaller buffer can reduce latency, but it also increases the load on your computer and can cause dropouts if it can’t keep up.
Check the USB connection, power supply, operating system and, where relevant, drivers against the specifications for the exact model. Adjust the level carefully when switching between headphones and speakers; Audient notes that the ‘DAW thru’ routing option on the iD14 MKII can bypass the volume control.
For a consumer purchase from a business seller in the EU, you’re generally entitled to a legal guarantee of at least two years from the date you receive the goods. Your Europe distinguishes this guarantee from any additional manufacturer’s warranty and notes that exceptions apply, particularly to purchases from private sellers.
No. The German Environment Agency explains that discarded electrical equipment must be collected separately from household waste; local collection points generally accept old electrical equipment free of charge. This is a disposal requirement, not an additional technical buying requirement for every interface.