Who uses the editing workstation?

Editors who check audio alone on headphones

If you mainly check dialogue edits on your own at a shared desk, you need an easy-to-reach headphone level control, not necessarily a host of recording features. Focusrite and MOTU list separate level controls for headphones and monitors. However, according to Focusrite User Guides, the headphones and line outputs on the Scarlett 2i2 4th Gen share the same signal feed.

Editing teams who listen together

If two people are listening at the same time, first establish whether separate volume controls are enough or whether you need different headphone mixes. Solid State Logic describes the SSL 2+ MKII as having two independent headphone outputs; Audient explains cue routing for the iD14 MKII.

Editors who switch between monitoring setups

If you check dialogue on headphones and across several pairs of speakers, look for assignable outputs and a straightforward way to switch between them. Audient describes using outputs 3/4 for alternative speakers with the iD14 MKII, with switching handled through the iD software.

What should you look for when buying?

First, decide whether you’ll be checking audio alone or with someone else. Then consider whether separate volume controls will do, or whether you need different signals and the ability to switch between pairs of speakers.

Priority What to check before buying Who it matters most to
Headphone level and undisturbed solo checking Check whether you can adjust the headphones and monitors directly, and whether they use the same signal feed. Focusrite says the Scarlett 2i2 4th Gen shares a feed between the headphones and line outputs. If I usually check dialogue on headphones at a shared desk, I want to adjust the level quickly without disturbing anyone with speakers. Around 36% of consumers put headphone monitoring for solo checks first.
Two people and separate monitoring routes Check whether two outputs really provide independent signals or simply have their own level controls. Solid State Logic describes the SSL 2+ MKII as having independent headphone outputs; Audient points to the routing settings on the iD14 MKII. If we’re listening together, we need to know whether separate volume controls are enough or whether each person needs a different signal. Around 29% of consumers prioritise checking dialogue together.
Switching between pairs of speakers Look for assignable outputs and a clearly explained way to switch between them. MOTU describes the M2’s RCA outputs as mirrored; Audient describes using outputs 3/4 for alternative speakers with the iD14 MKII. If I switch between headphones and several pairs of speakers when checking audio, I need assignable outputs and a straightforward way to change over. Around 21% of consumers put this first.
Connecting to your existing editing computer Check the USB connection and system requirements against the exact model version. MOTU specifies macOS 12 or later, or Windows 11 23H2 or later, for the M2. If I already have an editing computer, I want to check that the connection and operating system are compatible before buying. Around 14% of consumers prioritise computer and connection compatibility.

Common misconceptions

  • Two headphone sockets mean two independent mixes

    The number of sockets, separate volume controls and independently assignable signal paths are different features. Check the manual for the exact model version to see which signals are available at each output.

    Before buying, decide whether two people just need different volume levels or need to hear different signals. Audient warns that “DAW thru” bypasses the volume control for the relevant output on the iD14 MKII.

  • Mirrored outputs can be switched like a second pair of speakers

    According to the manufacturer, the RCA outputs on the MOTU M2 mirror the main outputs. That’s not the same as having an independently assignable speaker output.

    If you want to switch between two pairs of speakers, look for an explicitly described assignment and switching feature, such as setting up alternative speakers on the Audient iD14 MKII.

  • A ranking for one model generation also applies to another

    A comparison list published by WELT.de on 29 October 2026 ranked the Scarlett 2i2 3rd Gen at number 1. The Focusrite details in this article refer to the Scarlett 2i2 4th Gen; the two generations aren’t interchangeable.

    Check the full model name and generation against the relevant manufacturer’s manual before applying features or rankings to another model.

Key brands at a glance

Focusrite

The Scarlett 2i2 4th Gen is an option for a solo workstation with headphones and one pair of speakers.

  • Focusrite User Guides list separate level controls for headphones and line outputs.
  • According to Focusrite, the headphones and line outputs share the same signal feed, so bear this in mind if you need different headphone mixes.

MOTU

The M2 is aimed at a solo workstation where level meters and separate monitor and headphone controls are useful.

  • MOTU lists separate controls and level meters; the RCA outputs mirror the main outputs.
  • The RCA outputs don’t provide a second, independently routable speaker path. Also check the system requirements for your computer.

Solid State Logic

The SSL 2+ MKII is worth considering for a shared workstation if you need two headphone routes with separate level controls.

  • Solid State Logic lists two independent headphone outputs and four balanced outputs.
  • If you mainly check audio alone, consider whether the extra outputs are useful for your workflow.

Audient

The iD14 MKII could suit a workstation that needs headphone cue routing or a second pair of speakers.

  • Audient describes four line outputs, two headphone sockets and alternative speakers via the iD software.
  • Audient warns that “DAW thru” bypasses the headphone route’s volume control. Check that the routing gives you the separation you need.

RME

The Babyface Pro FS offers routing options for workstations set up to use TotalMix.

  • RME describes routing via TotalMix FX and two headphone connection formats.
  • A wider feature set doesn’t prove a sound-quality advantage for cleaning up dialogue, and should suit your workflow.

Joybuy products for PC playback

This selection is for PC playback through headphones or connected speakers at a solo workstation. If you need independently routable headphone mixes or several switchable monitor paths, look specifically for those features.

Nobsound Q4 USB Audio Gaming DAC

Nobsound Q4 USB Audio Gaming DAC

Could be suitable for PC playback through headphones or via an RCA output to active speakers. The connections listed don’t confirm independently routable monitoring paths for multiple people.

Features listed include a USB audio input, RCA output, headphone amplifier, optical input, Bluetooth, 24-bit 192 kHz, treble and bass controls, and a remote control.

View at Joybuy

Frequently asked questions

Do I need two microphone inputs to check cleaned-up dialogue?

Not for playback alone. Start by considering your headphone, speaker and routing requirements. Microphone inputs matter if you also want to record speech at the same workstation.

How do I set up a second pair of speakers with the Audient iD14 MKII?

Audient describes connecting speakers to outputs 1/2 and 3/4, assigning 3/4 as alternative speakers in the iD Mixer, and optionally switching via the iD button. Turn the level down before listening for the first time; Audient also notes that “DAW thru” can bypass the headphone route’s volume control.

What should I know about the legal guarantee and extra accessories when buying?

According to Your Europe, for consumer purchases in the EU, you have a minimum two-year legal guarantee from the seller for faulty goods, starting from the date you receive them. An additional manufacturer’s guarantee doesn’t replace this right. Check separately whether you already have suitable headphones and audio cables; these consumer rights don’t automatically apply to business purchases.

What rules apply to CE marking and disposing of an audio interface?

According to the European Commission, CE marking is required only for products covered by applicable harmonised EU rules that explicitly require it. For old electrical equipment, the German Environment Agency recommends not disposing of it with household waste.