If you’re mixing existing tracks in stereo and your current outputs connect properly to your headphones or monitors, you don’t need a new audio interface just because you’re working on a short film. Choose one that meets your actual monitoring, input and routing needs. Extra connections are only worth having if you’ll use them. Agree the delivery format with the film production team, rather than assuming that a higher maximum sample rate will give you a better mix.
Who benefits from which features?
Desktop stereo mixers
If you mainly work with existing music tracks, you’ll need a suitable, easy-to-use connection to your headphones or monitors. PreSonus lists two main outputs for the Studio 24c. Focusrite describes the 4th Generation Scarlett 4i4 as offering separate mixes for headphones and line outputs.
Mixers using multiple monitoring setups
If you switch between different speakers or need a separately assignable signal path, check the physical outputs and their routing options together. MOTU lists four balanced line outputs for the M4. SSL describes alternative monitor switching and multiple headphone mixes for the SSL 12.
Composers making additional recordings
If you’re recording new instruments or dialogue, plan separately for the number of mic, instrument and line inputs you’ll need to use at the same time. PreSonus lists two mic/instrument/line inputs for the Studio 24c. Focusrite notes that microphones cannot be connected directly to inputs 3 and 4 on the 4th Generation Scarlett 4i4.
What should you look for when buying?
First, decide which sources and monitoring setups need to be connected at the same time. Then you can work out whether a simple stereo path is enough or whether extra inputs and outputs serve a specific purpose.
| What you need |
What to check before buying |
Who should pay particular attention |
| Reliable stereo monitoring |
Check that the specific device has suitable headphone and monitor connections, and that its level controls meet your needs. |
If I mainly mix existing tracks in stereo, an easily accessible level control matters more to me than unused recording inputs. Around 36% of consumers would make reliable stereo monitoring their top priority. |
| Additional monitoring paths |
Check the output pairs and headphone paths, and confirm how they can actually be assigned in the control software. |
If I want to compare my mix on another pair of speakers or through a separate headphone mix, I need signal paths that can be assigned accordingly. Around 29% of consumers would prioritise additional monitoring paths and signal routing. |
| Inputs for new recordings |
Count the microphones, instruments and line sources you’ll use at the same time, then check that they match the built-in connections. |
If I want to record additional music or dialogue tracks, each input needs to suit the signal type. Around 21% of consumers would make inputs for new recordings their top priority. |
| Computer and project compatibility |
Check the exact model’s operating system, drivers, USB connection and power supply requirements. Agree the delivery format with the production team. |
If my computer or the agreed production workflow requires specific connections and settings, the interface needs to be compatible. Around 14% of consumers would check computer and project compatibility first. |
Which assumptions should you avoid?
-
Assuming four inputs means four microphone connections
On the 4th Generation Focusrite Scarlett 4i4, inputs 3 and 4 are line inputs. Focusrite says microphones cannot be connected directly to them.
For simultaneous recording, count microphone preamps and line inputs separately.
-
Treating ADAT as a set of built-in analogue inputs
An ADAT connection alone can’t record an analogue microphone signal. You’ll need compatible external hardware for additional analogue sources.
Count built-in inputs separately from those that only become available with an external converter or preamp.
Expanding your setup may require a suitable additional device and connection cables.
-
Confusing a level meter with film mix approval
The EBU treats programme loudness as a separate measurement. Its guidance on adapting film content for broadcast and streaming is not a blanket production requirement for films.
Agree the delivery requirements and check any specified loudness values with suitable metering software, rather than relying on the interface display alone.
-
Assuming a trial version is a permanent software licence
The Fender Studio Pro offer listed with the PreSonus Studio 24c is a six-month trial.
Check the licence period for the specific bundle separately from the hardware.
If you still need the software after the trial, you may need to buy it separately.
Which brands are worth considering?
PreSonus
The Studio 24c is a compact option for stereo monitoring and up to two suitable recording sources.
- PreSonus lists two balanced main outputs, two mic/instrument/line inputs, MIDI and a control for direct input monitoring.
- Two main outputs don’t provide a second, independently fed stereo monitor path. Direct input monitoring also doesn’t automatically give you the DAW signal with effects.
Focusrite
The 4th Generation Scarlett 4i4 is worth considering if you need extra line signal paths and separate mixes for headphones and line outputs.
- Focusrite lists line inputs 3 and 4, as well as separate mixes for headphones and line outputs.
- Focusrite says microphones can’t be connected directly to inputs 3 and 4 on the Scarlett 4i4. The 3rd Generation 8i6 and 2i2 are different models, so check their connections and features separately.
MOTU
The M4 is worth considering if four balanced line outputs, MIDI and visible input and output levels suit your planned signal path.
- MOTU lists four balanced TRS line outputs.
- According to MOTU, the four RCA outputs mirror the analogue outputs; they aren’t four additional independent paths.
Solid State Logic
The SSL 12 is worth considering if you need to record multiple sources, create separate headphone mixes or switch between monitor setups.
- SSL describes four built-in microphone preamps, configurable mixes and an ADAT input.
- You set up the mixes in SSL 360°. ADAT won’t provide additional analogue connections without suitable external hardware.
RME
The Babyface Pro FS is an option for a workstation where you need to plan signal paths carefully and flexibly.
- RME describes independent routing with TotalMix FX and a switchable output level for compatible active monitors.
- These manufacturer claims aren’t an independent comparison of sound or reliability with other devices.
Audio interfaces at Joybuy
Suitable products coming soon.
Frequently asked questions
Do I need an interface with 192 kHz for a short film?
No. A short-film project doesn’t automatically require that kind of device. The EBU specifies 48 kHz for the television production context described; check the actual project and delivery format with the film production team. A high maximum sample rate doesn’t guarantee a particular delivery result.
How do I set up a second monitoring path?
Check whether the interface has an additional physical output pair and allows you to assign it separately. Connect the relevant monitors and assign the desired signal to them in the interface or DAW software. For the SSL 12, the manufacturer describes alternative monitor switching and multiple mixes, set up using SSL 360°.
Can I connect a microphone to any input on an audio interface?
No. Inputs may be designed for different signal types. Focusrite says inputs 3 and 4 on the 4th Generation Scarlett 4i4 are line inputs, so microphones can’t be connected directly to them. Check the input type for each connection on the exact model.
Which sample rate should I choose for short-film music?
Follow the agreed production and delivery format, rather than choosing based only on the interface’s maximum sample rate. The EBU’s 48 kHz recommendation applies to the television production context described; it isn’t a blanket requirement for every short film.