Which interface is right for you?

Solo singers with an XLR microphone

If you’re recording vocals, choose an input that’s suitable for your microphone and lets you control the level. Whether you need 48 V depends on the specific microphone. Focusrite describes the Scarlett Solo 4th Gen as having an XLR microphone input, while Shure recommends checking the microphone’s specifications to see whether it requires phantom power.

Singers using a backing track

If you’re singing along to an existing track, check how you can monitor your voice and playback together through headphones. Focusrite describes the Scarlett Solo 4th Gen as offering an adjustable Direct Monitor mix with the playback channels.

Singers in a reverberant rehearsal room

Alongside the interface, microphone placement and the room’s acoustics matter here. Shure points out that a microphone can’t improve the acoustics of the space it’s in.

What should you look for when buying?

What you need What to check before buying Who will find this especially important?
Connecting and powering a microphone Check the number of XLR microphone inputs and the microphone connection. If phantom power is required, check the microphone’s instructions. If I want to connect my XLR microphone, the input must be suitable, as must any phantom power it requires. Around 28% of consumers prioritise microphone compatibility.
Monitoring vocals and playback Check for a headphone socket and documented support for adjusting the input signal and computer playback in the monitor mix. If I’m singing along to a backing track, I want to hear my voice and the playback together through headphones at a suitable balance. Around 22% of consumers prioritise the headphone mix.
Reverb and room acoustics Before paying extra for interface features, listen to a test recording made at the intended microphone position. According to Shure, a microphone won’t improve the room’s acoustics. If my rehearsal room sounds noticeably reverberant, I want to assess the sound at the actual recording position rather than expect the interface to change the room’s acoustics. Around 22% of consumers prioritise room acoustics.
Controlling the recording level Check for a gain control and level meter. Compare automatic features such as Auto Gain or Smartgain only against the documented features of each model. Focusrite and Audient list these features for certain models. If I’m setting up the recording on my own, I want to check the input level and spot clipping. Around 17% of consumers put level control first.
Connecting a second microphone Count the microphone preamps, not just the total number of inputs and outputs. You’ll need two suitable microphone preamps to record two XLR microphones at the same time. If I want to record a second voice at the same time in future, I’ll need another suitable microphone input. Around 11% of consumers prioritise the option to expand.

Common buying misconceptions

  • “2-in/2-out” doesn’t automatically mean two microphone inputs

    According to Focusrite, only one of the two analogue inputs on the Scarlett Solo 4th Gen is an XLR microphone input; the other is for line-level or instrument signals.

    If you want to record several microphones at the same time, check the specifications specifically for the number of microphone preamps.

    If you want to record with two microphones at the same time in future, you may need a different interface or another suitable recording setup.

  • More bit depth won’t fix a reverberant room

    Microphone placement and room acoustics affect your recording. Steinberg documents 32-bit Integer for the UR22C, provided you use a suitable driver and DAW. This isn’t 32-bit Float, and on its own it doesn’t demonstrate an advantage for solo vocals.

    Listen to a test recording in the room first, then check the recording format and the requirements for the specific model before comparing features.

  • A USB-C socket doesn’t guarantee sufficient power

    Focusrite says the Scarlett 2i2 4th Gen can use an optional 5 V power supply if the computer doesn’t provide enough power over USB-C.

    Check that your computer meets the power requirements and has the right connection for the interface you’re considering.

    Depending on your computer, you may need an additional power supply or a suitable connection.

Key brands to consider

Focusrite

The Scarlett Solo 4th Gen is designed for one XLR microphone; the Scarlett 2i2 4th Gen has two microphone preamps.

  • Focusrite lists Direct Monitoring and 48 V at the XLR input on the Scarlett Solo 4th Gen, as well as Auto Gain and Clip Safe on the Scarlett 2i2 4th Gen.
  • The Scarlett Solo 4th Gen doesn’t have a second XLR microphone input. According to Focusrite, the Scarlett 2i2 4th Gen may need an additional power supply if the computer doesn’t provide enough power over USB-C.

Audient

According to Audient, the EVO 4 has two microphone preamps, Smartgain and Monitor Mix for recording sessions you set up yourself.

  • Smartgain and Monitor Mix are documented features of the EVO 4.
  • Audient’s claims about sound quality are the manufacturer’s own and don’t demonstrate an advantage in independent comparisons.

Behringer

The UMC202HD is a USB-powered option with two microphone preamps and Direct Monitoring.

  • Behringer lists switchable 48 V phantom power and a separately adjustable headphone output.
  • For Windows, Behringer specifies a driver that you’ll need to download. Check that the USB connection is compatible with your computer.

Steinberg

The UR22C combines two microphone preamps with DSP monitoring and MIDI connections, if you need those features.

  • Steinberg documents DSP monitoring and MIDI connections for the UR22C.
  • According to Steinberg, 32-bit Integer requires a suitable driver and DAW. Bit depth alone doesn’t demonstrate an advantage for solo singing in your particular room.

Matching products at Joybuy

Matching products will be available soon.

Frequently asked questions

Are two inputs automatically enough for two XLR microphones?

No. One of the two analogue inputs on the Focusrite Scarlett Solo 4th Gen is intended for line-level or instrument signals. To record two XLR microphones at the same time, check that the interface has two microphone preamps.

When should I switch on 48 V phantom power?

Switch it on if your specific microphone’s instructions say it’s required. A standard dynamic microphone such as the Shure SM58 doesn’t need it. For ribbon microphones, Shure recommends checking the manufacturer’s specifications before connecting one.

What should I check when singing along to a backing track?

Make a test recording and check both the input level and how you’re monitoring your voice and the playback. Focusrite describes a setting on the Scarlett Solo 4th Gen that lets you mix Direct Monitor and playback.

Can an audio interface get rid of reverb in the rehearsal room?

No, an interface won’t change the room’s acoustics. Shure points out that a microphone can’t improve its acoustic surroundings, so listen to a test recording from the intended microphone position.

What are my rights if a newly bought interface is faulty?

For a consumer purchase from a business seller in the EU, you’re generally entitled to a minimum two-year legal guarantee against faults from the date you receive the goods, as explained by Your Europe. For a standard online distance purchase, you’re also generally entitled to a 14-day cooling-off period from delivery; legal exceptions may apply.