Who mixes at a small desk?

Mixing alone at a compact workstation

Usually mixes existing folk tracks through headphones or a pair of speakers, and wants to adjust levels without complicated routing. Focusrite and MOTU document dedicated headphone level controls on the models mentioned here.

Demo mixer recording new takes

Mixes tracks that have already been recorded and wants to add vocals or acoustic instruments. The key is knowing which inputs can be used at the same time. For example, the Audient iD4 MKII has a microphone preamp and an instrument input.

Listening together

Listens back to the demo with someone else and checks whether you need separate headphone volume controls or genuinely different signals. SSL lists two headphone outputs with separate volume controls for the SSL 2+ MKII.

What should you look for when choosing?

Use your computer’s existing output

A good fit if: you’re only mixing existing DAW tracks and can already connect and control your headphones or speakers as needed.

The trade-off: You won’t need an extra device or desk space, but you may still need an interface to record new vocals or instruments.

Compact interface with a stereo monitor path

A good fit if: you want to connect a pair of speakers and one pair of headphones, and occasionally record suitable sources. The Focusrite Scarlett 2i2 4th Gen and MOTU M2 have separate level controls for the monitor and headphone outputs.

The trade-off: Separate volume controls don’t automatically mean separate signals: the Scarlett 2i2’s line and headphone outputs share the same signal feed, while the M2’s RCA outputs mirror the main outputs.

Interface with additional assignable outputs

A good fit if: you need an extra signal path, for example for an external processor or a different monitor mix. With the Scarlett 4i4 4th Gen, outputs 3/4 can be assigned in Focusrite Control 2.

The trade-off: You’ll need to set up the additional routing. Extra outputs aren’t automatically useful if you only need stereo playback.

Two independently controlled headphone paths

A good fit if: you regularly listen to your demo with someone else using separate headphones. SSL lists two headphone outputs with separate volume controls for the SSL 2+ MKII.

The trade-off: Two headphone paths don’t increase the number of sources you can record at the same time. Also check whether you need different volume levels or genuinely different mixes.

Consideration What to check before buying Who is this important for?
Compact stereo monitoring Check the speaker connections, headphone socket and accessible level controls. Also consider signal routing and the space needed for the unit and its cables. If I’m mainly mixing existing tracks at a small desk through headphones or a pair of speakers, straightforward controls matter to me. Around 36 % of consumers put simple solo monitoring first.
Inputs for new takes Count the microphone, instrument and line signals you’ll use at the same time. Check whether any sockets share a channel on the specific model. If I want to add vocals or an acoustic instrument, I need to know which inputs can work at the same time. Around 29 % of consumers prioritise suitable inputs for new recordings.
Additional monitoring paths Check the headphone sockets, separate volume controls and independently assignable signals individually. If we want to listen to the demo together or need another signal path, I want to know whether genuinely separate signals are available. Around 21 % of consumers focus primarily on shared or expanded monitoring.
Computer and power supply Check that the operating system, drivers, USB connection and power requirements are compatible with your computer. If needed, allow for the additional power connection specified. If I want to use the interface with my existing computer, I’ll check the drivers and power requirements first. Around 14 % of consumers put straightforward computer connectivity first.

Common buying misconceptions

  • More sockets mean more independent monitor mixes

    The MOTU M2’s RCA outputs mirror the main outputs, while the Focusrite Scarlett 2i2 4th Gen’s line and headphone outputs share the same signal feed.

    Check the signal routing in the manual for the specific model, not just the number of sockets.

  • Two connection types for one channel mean two simultaneous inputs

    On the Focusrite Scarlett 2i2 4th Gen, plugging in a jack disables the microphone input on the same channel.

    Before buying, make a note of which vocal, guitar and line signals you want to record at the same time, then check how the channels are configured.

  • A USB-C connection guarantees computer compatibility

    A USB-C connector alone doesn’t tell you whether the drivers and power supply will work with your computer. SSL says the SSL-ASIO/WDM driver is required for the SSL 2+ MKII on Windows.

    Compare the manufacturer’s requirements with your specific computer and operating system.

Key brands at a glance

Focusrite

The Scarlett 2i2 4th Gen is designed for a straightforward stereo monitoring setup with two recording channels. Choose the Scarlett 4i4 4th Gen if you need extra line inputs and outputs.

  • Focusrite says both models have dedicated headphone level controls.
  • On the Scarlett 2i2, the headphones and line outputs share the same signal feed. The Scarlett 4i4 has additional assignable outputs, which need to be set up.

MOTU

The M2 suits a compact setup with two recording sources, one pair of headphones and clearly visible input and output levels.

  • MOTU lists a full-colour display, separate monitor and headphone controls, and MIDI In/Out.
  • The additional RCA outputs mirror the main outputs, so they don’t provide an independent second mix.

Solid State Logic

The SSL 2+ MKII is worth considering if you need two headphone paths or extra line outputs alongside two recording channels.

  • SSL says the volume of the two headphone outputs can be controlled separately.
  • Solid State Logic lists the unit as measuring 234 × 159 × 70 mm, including the height of the controls. Make sure you allow enough desk space.

Audient

The iD4 MKII suits a compact setup with one microphone input and one instrument input.

  • Audient lists two headphone connections and two line outputs.
  • Audient says the iD4 MKII has one microphone preamp. Having two headphone sockets alone doesn’t mean you can create independently controlled mixes.

PreSonus

The Studio 24c is an option for occasional two-channel recording, with an easy-to-access mix of input signal and computer playback.

  • PreSonus lists two flexible inputs, balanced stereo main outputs, a headphone output and a mix control.
  • The manufacturer’s specifications listed here don’t mention an additional independently assignable stereo line output.

Recommended products at Joybuy

Recommended products coming soon.

Frequently asked questions

How many inputs do I need if I mainly mix tracks that have already been recorded?

For playing back existing tracks, the number of microphone inputs isn’t what matters: you need a suitable monitoring path. If you also want to record, count the microphone, instrument and line channels you’ll need to use at the same time. On the Focusrite Scarlett 2i2 4th Gen, the XLR and jack connections share a channel, so you can’t use both at once.

Do I automatically need an interface with four outputs for two pairs of headphones?

No. First check whether you need two headphone sockets, separate volume controls or two different signals. SSL describes the SSL 2+ MKII as having two independently controlled headphone outputs. On the Focusrite Scarlett 2i2 4th Gen, the headphones and line outputs share the same signal feed.

What should I consider when setting up in a tight space?

Measure the space you have, including room for plugs and cables. Focusrite lists the Scarlett 2i2 4th Gen as measuring 180 × 117 × 47,5 mm; Solid State Logic lists the SSL 2+ MKII as measuring 234 × 159 × 70 mm, including the height of the controls. Position the speaker and USB cables so they don’t keep pulling on the sockets.

What should I check about my computer and cables before buying?

Check that you have suitable monitor and USB cables, and that your computer meets the power and driver requirements for the model you’ve chosen. SSL says the SSL-ASIO/WDM driver is required for the SSL 2+ MKII on Windows.