Who is an audio interface for solo vocals suitable for?

Solo singers with an XLR microphone

You want to record one voice and need a suitable microphone input, potentially with phantom power, as well as a headphone socket. Musikhaus Korn explains that one microphone preamp may be enough for solo vocals; Focusrite describes 48 V power for microphones that require it.

Singers who care about monitoring

You sing along to a backing track and want to hear your voice as you record, with control over its level. Focusrite describes Direct Monitoring as a direct monitoring path with virtually no delay caused by the computer.

Solo recording artists planning to expand

You’re starting with one voice, but might want to connect a second microphone and use both at the same time later on. Musikhaus Korn points out that you’ll need two microphone preamps for this; an instrument input doesn’t count as a second microphone input.

What should you look for when choosing one?

First check that your microphone and its power requirements are compatible, then decide which monitoring and expansion options you actually need.

What matters What to look for Who will find this especially important?
Microphone connection and power Check your microphone’s connection and power requirements, as well as the number of XLR microphone preamps and whether switchable 48 V phantom power is available if needed. When connecting my XLR microphone, I want to know whether the preamp and any required phantom power are compatible. Around 36% of consumers put this compatibility first.
Headphone monitoring while recording Look for a headphone socket and check whether you can mix the input signal and backing track to suit your needs. When recording vocals to a backing track, I want to hear my voice through headphones without distracting delay. Around 29% of consumers put monitoring while recording first.
Level control for solo recordings Compare the gain controls and the level or clipping indicators on the specific model. When recording on my own, I want to check the input level before singing the whole take. Around 21% of consumers say setting levels is their main concern.
Additional microphones and computer connection Count the microphones you’ll need to use at the same time separately from any instruments, and check the USB connection, power requirements and system requirements against your computer. If I want to use two XLR microphones at the same time later on, I’ll need two microphone preamps, not just two analogue inputs. Around 14% of consumers prioritise this scope to expand.

Common buying mistakes

  • Assuming “two inputs” means two microphone inputs

    The Scarlett Solo 4th Gen and Audient iD4 MKII each combine one microphone preamp with a differently configured input. So, this number of inputs isn’t enough to connect a second XLR microphone at the same time.

    Check how many microphone preamps the specific model actually has if you want to record with two microphones at once.

  • Thinking a higher sample rate is a substitute for suitable monitoring

    The maximum sample rate doesn’t tell you how you’ll monitor while recording vocals. Direct Monitoring, on the other hand, affects how you hear the input signal as you record.

    Check for a headphone socket and monitor mix first. If you want to hear software effects while singing, also find out how they’re routed to your monitoring path.

  • Expecting the interface to solve room echo

    Shure explains that reflections and the room’s layout can affect your recording. Additional inputs on an interface won’t change these acoustic conditions.

    Record a test take in the room you plan to use, then assess the microphone position and audible room sound separately from your choice of interface.

  • Relying on a software trial as a permanent licence

    The German PreSonus website lists a six-month trial of Fender Studio Pro with the Studio 24c. This isn’t a permanent licence.

    Check the duration and licence terms for the specific bundle before relying on it to meet your software needs.

Key brands to consider

Focusrite

The Scarlett Solo 4th Gen is designed for one XLR microphone and a separate line or instrument input.

  • Focusrite lists 48 V, Direct Monitoring and separate controls for headphone and speaker outputs on this model.
  • The second analogue input isn’t a second microphone input. These specifications apply to the Scarlett Solo 4th Gen, not to every Scarlett model.

Audient

The iD4 MKII combines one microphone preamp with a separate instrument input and a monitor mix.

  • Audient lists features including loopback, two headphone sockets and 48 V for the iD4 MKII.
  • There’s only one microphone preamp. Audient specifies a minimum USB power supply of 0.9 A at 5 V via a suitable USB 3.0 port; check that your computer can provide this.

MOTU

The M2 is aimed at users who want two microphone inputs and level meters on the unit itself.

  • MOTU lists two combo XLR/TRS inputs with individually switchable phantom power, plus a colour display for levels.
  • Check that your computer supports the operating system versions listed by MOTU. Extra microphone inputs aren’t essential for recording a single voice.

PreSonus

The Studio 24c offers two microphone preamps, an adjustable Direct Monitor mix and LED level meters.

  • PreSonus lists two inputs that can be used simultaneously, along with USB-C to USB-C and USB-C to USB-A cables in the box.
  • For a single vocal, the additional inputs will go unused if you only use one microphone input.

Behringer

The UMC202HD is an option with two microphone preamps and Direct Monitoring.

  • Behringer lists signal and clip LEDs, as well as a separate headphone level control.
  • For the UMC202HD, Behringer specifies a USB Type-B connection and a driver download for Windows. These features don’t necessarily apply to the rest of the UMC range.

Joybuy products for recording solo vocals

Related products coming soon.

Frequently asked questions

Do I need two microphone preamps to record a single vocal?

One suitable microphone preamp is generally enough for a single XLR microphone. If you want to record with two XLR microphones at the same time later on, you’ll need two suitable microphone inputs; an additional instrument input doesn’t count as a second microphone preamp.

When should I switch on 48 V phantom power?

Switch it on if your specific microphone or an active device in the signal chain requires this power supply, according to its instructions. Focusrite describes 48 V at the XLR input on the Scarlett Solo 4th Gen for devices that need it; it isn’t a universal setting for every microphone.

Why does my voice sound doubled or delayed when I record?

If you monitor both the direct input and the delayed signal returning from your recording software, you may hear two signal paths. For direct monitoring, Focusrite recommends muting the monitoring for the software track currently being recorded while leaving the backing track playing; check the relevant setting in your software.

What should I check about drivers and included software?

Check the system requirements for the specific model against your operating system, and review the duration and licence terms for any included software. The German PreSonus website lists a six-month trial of Fender Studio Pro with the Studio 24c; this doesn’t mean you’ll receive a permanent licence.