Which setup is right for you?

Comparing finished recordings

If you want to compare files fairly at your desk, match their perceived loudness using suitable software. The EBU recommends measuring programme loudness, while the Audacity manual explains loudness normalisation.

Recording different sources

If you record different voices or instruments, you should monitor the input level for each source and avoid confusing it with the loudness of the finished file. Focusrite documents Auto Gain and Clip Safe as recording workflow features on the 4th Generation Scarlett 2i2.

Frequent monitoring while standing

If you often switch between recording, computer playback, headphones and speakers while you work, easily accessible monitoring controls can be important. MOTU describes separate monitor and headphone controls on the M2, while PreSonus lists a control for the monitor mix on the Studio 24c.

What should you look for?

First, work out whether you’re comparing finished files or setting levels for new recordings. This will determine whether software, inputs or easily accessible monitoring controls matter most to you.

Priority What to check before buying Who is it important to?
Loudness of finished recordings Check your existing monitoring setup and the software’s loudness features. If you want to compare saved files fairly, you’ll need a software workflow to match perceived loudness. Around 36% of consumers make this a priority.
Input levels for new takes Check that the inputs are suitable and the level display is easy to read. If you record different sources, you’ll want to be able to monitor the input level without confusing it with the file’s eventual loudness. Around 29% of consumers prioritise setting levels during recording.
Monitoring controls at a standing desk Check the monitor and headphone controls, as well as signal routing. If you often switch between recording and playback while you work, easily accessible monitoring controls can make things easier. Around 21% of consumers pay particular attention to these controls.
Inputs for multiple sources Check the type and number of inputs you can use simultaneously. If you want to record multiple sources, the input combination needs to suit your microphones and instruments. Around 14% of consumers prioritise suitable inputs for multiple sources.

Which buying mistakes should you avoid?

  • Confusing peak level with perceived loudness

    Similar peak levels don’t necessarily mean that two programmes will sound equally loud. The EBU recommends measuring programme loudness; an interface meter alone won’t match the levels of finished files.

    First decide whether you want to monitor the input level while recording or compare the loudness of saved files. For the latter, use a suitable loudness tool.

  • Assuming extra sockets provide independent monitoring

    According to the manufacturer, the RCA outputs on the MOTU M2 mirror the main outputs. So, extra sockets don’t mean you can route a second, independent mix to them.

    Check specifically whether the outputs can be routed independently, rather than simply comparing the number of sockets.

  • Assuming similarly named model generations are identical

    Auto Gain and Clip Safe are documented features of the 4th Generation Scarlett 2i2. The 3rd Generation model has different features.

    Before you buy, check the full model name and generation against the features you need.

Brands and model ranges to consider

MOTU

The M2 is worth considering if you want to see input and output levels directly on the device.

  • MOTU says the LCD meter displays input and output levels, with separate controls for monitor and headphone volume.
  • According to MOTU, the RCA outputs mirror the main outputs, so they don’t provide a second mix that can be routed independently.

Focusrite

The 4th Generation Scarlett 2i2 is worth considering if you often switch recording sources.

  • Focusrite lists Auto Gain and Clip Safe as recording workflow features on this generation.
  • These features don’t match the programme loudness of finished recordings, and the 3rd Generation model isn’t the same.

PreSonus

The Studio 24c combines two analogue inputs, LED level displays and a control for the direct monitor mix.

  • PreSonus lists displays for two inputs and two main outputs, plus a mix control for the input signal and computer playback.
  • The monitor mix doesn’t change the saved loudness of individual files.

Audient

The iD4 MKII is a compact option if you want to connect a microphone and an instrument.

  • Audient lists a microphone preamp, an instrument input, Monitor Mix and ScrollControl.
  • If you want to connect two microphones at once, check the exact input configuration rather than assuming it from the ‘2-in’ label.

Solid State Logic

The SSL 2 MKII is a two-input option if instrument inputs and stereo loopback suit your workflow.

  • Solid State Logic describes two analogue preamps, an instrument mode, stereo loopback and two headphone sockets.
  • Two headphone sockets alone don’t mean you can route separate mixes to each one.

Related products at Joybuy

Here you’ll find a podcast kit for recording with two microphones and a sound card mixer. A software workflow is still essential for matching the loudness of finished files.

Yinkaer G10-P17-P17 podcast kit with two microphones

Yinkaer G10-P17-P17 podcast kit with two microphones

This kit is suited to a podcast or streaming setup with two microphones and a sound card mixer.

The product title specifies two 3.5 mm condenser microphones and effects.

View at Joybuy

Frequently asked questions

Can I use an interface level meter to make several finished files sound equally loud?

No. An interface level meter won’t match the perceived loudness of finished files on its own. You’ll need to measure loudness and, if necessary, make adjustments in software. The EBU treats programme loudness and maximum true-peak values as separate measurements.

How do I start setting levels for a new recording?

First, choose an input that suits the source and monitor the input level during a representative performance. Set the gain before recording, and treat matching the file’s loudness afterwards as a separate step.

Are extra output sockets enough for two people or two pairs of speakers?

Not necessarily. According to MOTU, the RCA outputs on the MOTU M2 mirror the main outputs. If you need different signals, check specifically whether the interface offers independently routable outputs or mixes; separate volume controls alone don’t guarantee this.

What rights do I have if a product is faulty?

When you buy faulty goods from a trader in the EU, you have statutory consumer rights. Your Europe describes a minimum two-year guarantee from the date you receive the goods. This is separate from any voluntary manufacturer’s warranty.

What should I look for when it comes to product safety in Germany?

For its market surveillance checks, Germany’s Federal Network Agency lists points including correct CE marking, an identifiable product, accurate manufacturer details, and German instructions and warnings. This doesn’t confirm that a particular model or listing has already been checked.