Comparing existing recordings
You’re listening to the original and denoised file repeatedly, and want to check first whether your current headphone setup is up to the job. Audacity describes noise reduction as a software process.
If you already have the original and denoised recordings as digital files, your existing listening setup is all you need to compare them at first: an audio interface won’t remove tape hiss from a saved file. To transfer tapes from a cassette deck, however, you’ll need two line inputs that can be used at the same time, one for the left channel and one for the right. Also look for a headphone socket, level control and a connection to your computer.
You’re listening to the original and denoised file repeatedly, and want to check first whether your current headphone setup is up to the job. Audacity describes noise reduction as a software process.
You want to connect a cassette deck and record both stereo channels. Audacity recommends using a line output from the source device; the key is having the right inputs and cables.
You need a headphone socket that’s easy to reach and want to adjust the level directly on the device. Focusrite’s documentation for the 4th Generation Scarlett 2i2 specifies a dedicated headphone level control.
First, decide whether you want to compare digital files or also record from a cassette deck. Then check the connections, headphone controls and how much space you have at your standing desk.
| What you need | What to check when buying | Who is this important for? |
|---|---|---|
| Comparing files | Use your existing listening setup and the software preview; check that the headphone socket and level control suit your workspace. | If I want to listen to the original and edited files repeatedly, a listening setup that works for me matters more than extra recording features. Around 36% of consumers say comparing files is their main concern. |
| Recording stereo cassettes | Check for two line channels that can be used at the same time, suitable cables and the correct line setting rather than instrument mode. | If I want to connect a cassette deck with left and right outputs, I need to be able to capture both channels separately. Around 29% of consumers prioritise stereo transfers. |
| Adjusting headphone levels | Check for a headphone socket and an easy-to-reach level control; consult the manual to see whether the headphones and monitors receive the same signal feed. | When listening repeatedly, I want to adjust the headphone volume easily on the device, without assuming this will help me detect hiss more effectively. Around 21% of consumers prioritise adjustable headphone monitoring. |
| Setting up at your desk | Check the position of the connections, USB connection and system requirements against your computer and desk. | If I want to connect and operate the interface at a standing desk, accessible sockets and a suitable computer connection are important. Around 14% of consumers focus primarily on their workspace setup. |
An extra input won’t remove hiss from a file that’s already been digitised. Noise reduction is done in audio software.
First, compare the saved original file with the edited version using your existing listening setup, then check which feature you’re actually missing.
You need suitable inputs to record the left and right outputs of a cassette deck as two separate channels.
Check the deck’s outputs against the inputs on the specific model, and make sure you select the right operating mode. You may need suitable cables for jack inputs.
Allow for suitable connecting cables if needed.
Direct monitoring plays back the incoming signal; it doesn’t automatically play the result of later software processing.
To compare before and after, play back the saved original file and the edited file.
A dedicated volume control doesn’t necessarily mean the headphones and monitors receive different signals.
Check the manual for the specific model to see whether both outputs use the same signal feed.
The UCA202 is worth considering if your cassette deck has stereo RCA line outputs; the UMC202HD has two combo inputs that can be switched to line level.
The 4th Generation Scarlett 2i2 has two front-facing jack inputs and a dedicated headphone level control.
The M2 is an option if you’re looking for two combo inputs, a headphone socket and level meters on the device.
The MiniFuse 2 has two combo inputs and a headphone socket, making it suitable for a compact desk setup.
The UR22C is worth considering if you want a monitor mix control and MIDI connections alongside two inputs and outputs.
No. Direct monitoring plays back the incoming signal. Audacity describes reducing steady background noise, such as tape hiss, as a software process; listen to the edited file to assess the result.
Where possible, use a line, tape or record output from the cassette deck and suitable line inputs. Audacity recommends using a line output from the source. For stereo, connect both the left and right channels and capture them in your recording software.
Audacity notes that satisfactory noise reduction may not be possible when noise is loud or changes over time, or when the wanted signal and the noise have similar frequencies. Listen to the preview and, if necessary, the residual signal that has been removed, rather than judging only by how much noise has been reduced.
For a faulty consumer purchase, the seller is responsible for providing the statutory remedy. Your Europe states that purchases of goods in the EU come with a legal guarantee of at least two years from receipt. Under § 439 BGB, the seller must cover the necessary costs of providing the remedy, particularly transport, labour and materials. A voluntary manufacturer’s warranty does not replace these rights.
The Bundesnetzagentur lists correct CE marking, an identifiable product and accurate manufacturer details among the checks it carries out during market surveillance. A CE mark is not an independent quality certification for audio performance.