Which setup is right for you?

Restorers working alone

If you’re comparing original and processed files on headphones at a shared desk, a suitable connection and easy-to-reach volume control are important things to look for.

People digitising tapes

If you’re transferring a stereo tape yourself, the left and right channels must reach your computer separately. Focusrite User Guides describe the 4th Generation Scarlett 2i2 as having two jack inputs for this line-level connection.

Teams listening together

If you’ll be listening together in the same place, first decide whether two headphone outputs with separate volume controls will be enough, or whether you need different signals. Solid State Logic documents two independent headphone outputs with their own level controls on the SSL 2+ MKII.

Which buying criteria matter most?

First decide whether you’ll only be listening to existing files or digitising a tape yourself. Then work out whether one or two people need to listen at the same time.

What you need What to check before buying Who is it important to?
Controlled headphone listening Check the headphone connection and plug, the dedicated level control, and the specific model’s headphone load specifications. A high maximum output power alone doesn’t tell you what level is right for your headphones. I want to compare quiet traces of hiss without listening unnecessarily loudly in a shared office. Around 36% of consumers put controlled listening for one person first.
Stereo transfer Check for two line inputs that can be used at the same time, the right input mode, and the routing of both channels in your recording software. If I connect the tape deck myself, I need to be able to record the left and right channels separately. Around 29% of consumers prioritise stereo digitisation.
Listening together Check the number of headphone outputs, separate level controls and the signal routing you need in the manual for the exact model. We want to listen at the same time and set our own volume levels; different test signals also require suitable signal paths. Around 21% of consumers put shared listening options first.
Compatibility with your workspace Check that the operating system and version, USB connection and power supply, as well as the cables and software you need, are compatible with your office computer. I want to use the interface with my existing computer without unnecessary setup. Around 14% of consumers prioritise how well it fits into their workspace.

Which assumptions should you avoid?

  • A higher sample rate doesn’t automatically make it easier to judge noise reduction

    Recording resolution alone doesn’t prove that processing artefacts will be easier to spot in your particular office. The signal path and a suitable listening setup are what matter.

    Choose recording features according to your actual transfer needs, and compare the original and processed files using the same listening setup.

    If you’re only checking files, unused recording features can mean extra setup work.

  • Two headphone sockets don’t automatically mean two independently selectable mixes

    Two people may need separate volume controls; different test signals also require suitable signals that can be routed independently.

    Check the manual for the exact model to see whether only the volume or the signal feed can also be controlled independently.

  • Line and instrument modes aren’t the same

    If the inputs are switchable, it’s important to select the right mode for the connected tape deck. Each stereo channel must also be assigned to an input.

    Check the connections, input mode and both channels with a short test recording before transferring the whole tape.

    A wrong setting could mean having to repeat the transfer. Depending on the connections, you may also need suitable cables.

Which brands and model ranges are worth considering?

Focusrite

Features vary across generations of the Scarlett range, so always check the exact model.

  • Focusrite User Guides list two line inputs and separate level controls for the headphone and main outputs on the 4th Generation Scarlett 2i2.
  • According to Focusrite, both outputs receive the same signal feed. These specifications don’t automatically apply to other generations.

MOTU

The M2 is worth considering if you want clear level meters and separate controls for monitor and headphone volume.

  • MOTU lists two combination microphone, line and instrument inputs, one headphone output, and separate monitor and headphone controls for the M2.
  • These features alone don’t prove that the interface will make it easier to assess tape hiss.

Solid State Logic

The SSL 2+ MKII is worth considering for a workspace where two people need to use headphones at the same time.

  • Solid State Logic documents two independent headphone outputs with their own level controls, plus two inputs that support line-level signals.
  • Separate volume controls don’t automatically mean both people can hear different signals. Check the routing on the exact model.

PreSonus

The Studio 24c combines inputs for recording sources with features for monitoring your audio.

  • PreSonus lists two microphone, instrument or line inputs, one headphone output, a mix control and level meters.
  • The mix control is for monitoring while recording; it doesn’t mean the interface has two independent headphone outputs.

Behringer

The UMC202HD is a documented 2-in/2-out option for recording and headphone monitoring.

  • Behringer lists two switchable line or instrument combo inputs, Direct Monitoring, and a headphone output with its own control.
  • According to Behringer, a Windows driver for this model is available to download. Check the requirements against your office computer.

Audio interfaces at Joybuy

Related products will be available soon.

Frequently asked questions

Does the audio interface itself remove tape hiss?

No. The interface handles input, output and monitoring; noise reduction is done in audio editing software. The Audacity Development Manual describes reducing steady background noise such as tape hiss. The iZotope help documentation warns that stronger noise reduction can also suppress quiet parts of the wanted signal. So compare the original and processed files.

Do I need Direct Monitoring to assess a file that’s already been denoised?

No, not when playing back a file that has already been processed. Direct Monitoring sends an incoming signal to your headphones or speakers and can help when transferring a tape. You’ll then listen to the processed file through your computer’s playback.

How do I connect a stereo tape deck?

If the tape deck has left and right line outputs, connect each one to a separate line input and check the channel assignments in your recording software. Also check the connections and input mode on the specific device. For the 4th Generation Scarlett 2i2, Focusrite User Guides describe two mono jack inputs, with line mode selected when instrument mode is switched off.

How can I protect my hearing when checking quiet traces of hiss?

Don’t turn your headphone volume up without limit just to find a trace of hiss. The Federal Institute for Occupational Safety and Health warns that high sound levels directly at the ear can damage your hearing. You can’t work out a safe sound pressure level from the position of a control on the interface alone.

What should I check for product safety when buying an audio interface in Germany?

Check the required product information and documents for the specific device being sold. The Federal Network Agency lists a correctly applied CE marking, identifiable manufacturer details, and any required German-language instructions and warnings among the points it checks when monitoring the market.