If you can already listen to digitised recordings through your existing audio output using suitable headphones, you don’t need a new interface just to reduce noise. An interface becomes relevant if you need an additional headphone socket or two suitable inputs for a stereo transfer. For comparisons, make sure you listen to playback from your software rather than just the direct input signal.
Who might need an audio interface for this?
Check processed tapes through headphones
You already have digital recordings and want to check whether noise reduction has also removed any of the wanted audio. You don’t automatically need a new interface if your existing audio output is suitable for listening.
Work with limited access to plug sockets
You want to avoid connecting another power supply at your listening station if possible. Check whether the specific USB port can power your chosen interface and whether your setup needs a hub.
Digitise stereo cassettes
You also want to record both channels from an analogue tape deck. You’ll need suitable inputs, the correct routing for both channels and the right listening route for playback through your software.
What to look for when choosing
MOTU, Focusrite and Arturia’s manufacturer guidance relates to the power supply for their respective models. To assess noise reduction, the Audacity Manual recommends listening to the result through software playback.
| What matters |
What to check before buying |
Who is this important to? |
| USB power |
Check the power available from the specific computer port and whether you’ll need an additional 5-V connection or a hub. |
If I don’t want to use another plug socket at my listening station, power from my actual USB setup is essential; around 34% of consumers put power supply first. |
| Software playback |
Check whether you can listen to playback from your audio-editing software through headphones; Direct Monitoring alone won’t necessarily play the processed signal. |
When comparing the original and processed recording, I need to listen through the software rather than just to the direct input signal; around 33% of consumers prioritise this sound comparison. |
| Stereo transfer |
Check the tape deck’s outputs, suitable cables, two inputs that can be used at the same time and channel routing in the software. |
If I want to make a new stereo recording from a cassette deck, both channels need to work; around 20% of consumers prioritise this kind of transfer. |
| Use your existing setup |
First, check whether your existing audio output can play the digitised recording through your headphones. You’ll need suitable inputs to make a new stereo recording. |
If I’m only checking files I already have, I don’t want to buy new hardware just for that; around 13% of consumers prioritise avoiding an unnecessary purchase. |
Avoiding buying and connection mistakes
-
Confusing Direct Monitoring with processed playback
Direct Monitoring plays the input signal. It doesn’t automatically show you how the software has processed the recording.
For an A/B comparison, listen to playback from the software and check the processing carefully.
A misjudgement could mean having to process the recording again.
-
Assuming bus-powered devices work with every USB hub
Power supply can vary depending on the USB port and hub. Focusrite documents an additional 5-V connection for the Scarlett 2i2 4th Gen, while Arturia notes that the MiniFuse 2 may have problems with some passive hubs.
Before buying, check the guidance for the specific model and consider whether your intended USB connection will provide enough power.
-
Assuming extra outputs provide independent listening routes
According to the manufacturer, the RCA outputs on the MOTU M2 mirror other outputs. The headphone output on the Arturia MiniFuse 2 plays the same signal as the monitor output, but has its own volume control.
If you want headphones and speakers to receive different signals, check the signal routing and controls on the specific model.
A guide to relevant brands
MOTU
The MOTU M2 is a USB bus-powered option with two combination mic, line and instrument inputs, plus a headphone output.
- MOTU says you can view input and output levels on the device.
- The RCA outputs mirror other outputs, so they can’t be independently assigned as a second listening route.
Focusrite
The Scarlett 2i2 4th Gen combines two line inputs with a headphone socket and stereo Direct Monitoring.
- Focusrite documents an optional 5-V power supply for this model if USB power isn’t sufficient.
- Direct Monitoring plays the input signal. To assess software noise reduction, listen to playback from the software; the additional power supply may take up a plug socket.
Arturia
The MiniFuse 2 is a compact, USB-powered option with two inputs, a monitor mix and a headphone socket.
- Arturia describes the headphone output as having its own volume control.
- The headphone output mirrors the monitor signal. Arturia also warns that some passive USB hubs may not supply enough power.
Audient
The USB bus-powered EVO 4 is an option if you want to record a stereo source as well as listen back.
- Audient says the two inputs can be linked for a stereo line signal.
- This linking is a connection and control feature; it doesn’t demonstrate an independent sound comparison with other interfaces.
Steinberg
The UR22C has two mic/line inputs and a selectable connection for an external 5-V power supply.
- The alternative power supply may be useful if USB power isn’t sufficient.
- An external power supply may use a plug socket. The 32-bit integer support mentioned in the manual applies under certain driver and software conditions; it doesn’t demonstrate better tape hiss removal.
Products at Joybuy
Suitable products coming soon.
Frequently asked questions
Does an audio interface remove tape hiss by itself?
No. The interface is used for recording or playback; noise reduction is done in software. The Audacity Manual describes how to process tape hiss and recommends listening to the result.
How can I check whether the noise reduction is too strong?
Listen to the processed playback in your software and compare it with the original. The Audacity Manual also recommends listening to the removed noise to help you judge how much wanted audio may have been affected. Listening only to the direct input won’t show you the processed result.
What should I check before connecting a cassette deck?
Check the deck’s audio outputs, suitable cables and whether the specific interface has two inputs suitable for a stereo signal. Assign both channels correctly in your recording software and keep an unprocessed copy.
What can I do if the interface doesn’t work reliably over USB?
First, check the computer port you’re using and the cable connection. Focusrite describes an additional 5-V connection for the Scarlett 2i2 4th Gen if USB power isn’t sufficient. Arturia warns that the MiniFuse 2 may have problems with some passive hubs. The right alternative depends on the model and connection.