If your recordings are already saved as files, you don’t automatically need a new audio interface. First check your existing listening setup and use software to reduce the noise; an interface won’t remove tape hiss by itself. The Audacity manual explains that noise reduction is handled by software, while specifications from Focusrite, MOTU and Behringer confirm that the models covered here have two line inputs that can be used simultaneously for suitable stereo transfers. If you mainly listen through headphones, a suitable headphone output and its controls matter more than extra recording features.
Who might need an audio interface?
Before-and-after listeners
If your recordings are already saved as files, you can start by using your existing listening setup. The Audacity manual describes noise reduction as software processing; the key is to compare the processed result with the original.
Cassette digitising
If you also want to record a stereo cassette signal, you’ll need two line inputs that can be used simultaneously for the left and right channels. Specifications from Focusrite, MOTU and Behringer confirm that the models covered here have these inputs.
Headphone listeners
If you mainly use headphones to check for quiet background noise, look for an output that suits your headphones. Audient publishes output figures for the iD14 MKII with several load impedances.
What should you look for?
First decide whether you want to assess existing files or also record from a cassette deck in stereo. The requirements for inputs and monitoring are different.
Assessing files that are already digital
Choose this if: You want to compare processed and unprocessed files. First check whether your existing listening setup is up to the job.
The trade-off: Extra recording inputs won’t replace noise-reduction software; the Audacity manual describes noise reduction as software processing.
Digitising stereo cassettes as well
Choose this if: Your cassette deck has left and right line outputs. You’ll need two line inputs that can be used simultaneously.
The trade-off: Direct monitoring plays back the input signal, not necessarily the result of subsequent software processing.
Listening mainly through headphones
Choose this if: You mainly use your headphones to judge subtle differences. Compare the output and check that it’s suitable for your headphones.
The trade-off: Manufacturer figures measured under different conditions aren’t a listening test and don’t prove that one model will sound better with your headphones.
| Priority |
What to check before buying |
Who is it most relevant to? |
| Comparing processing |
Compare the original and processed file using the same listening setup; check the software preview and residual noise. |
When assessing processed and unprocessed files, I want to compare both using the same listening setup. Around 36% of consumers put this before-and-after comparison first. |
| Recording in stereo |
Check for two simultaneous line inputs, as well as suitable deck outputs, cables and channel assignment. |
When digitising a cassette deck too, I want to record the left and right channels at the same time. Around 29% of consumers prioritise stereo transfers. |
| Listening through headphones |
Check the headphone socket, separate volume control and output specifications to make sure they’re suitable. |
When checking for quiet background noise, I want to listen through my own headphones and set the level accordingly. Around 21% of consumers prioritise headphone monitoring. |
| Connecting to a computer |
Check that the operating system, available USB port, power requirements and any necessary drivers are compatible. |
I want to set up the interface easily with my office computer, so the operating system and connections need to be compatible. Around 14% of consumers prioritise computer connectivity. |
Avoid common buying mistakes
-
Buying an interface as an automatic fix for tape hiss
An audio interface provides recording and playback connections, but it won’t remove noise from a file by itself. Noise reduction is a software task; the Audacity manual also points out that it can introduce audible compromises to the wanted signal.
If your recording is already digital, first check your comparison process and existing listening setup.
An unnecessary purchase also means extra set-up work.
-
Confusing one input with a stereo transfer
You need two usable line inputs to record the left and right outputs of a stereo cassette deck at the same time.
Count the inputs, then check that the sockets, cables and channel assignment match your deck’s outputs.
If you don’t have the right cables, you may need to buy extra hardware or try the transfer again.
-
Assuming direct monitoring or a high bit depth means better restoration
Direct monitoring plays back the input signal; it doesn’t automatically let you assess the file after processing. For the UR22C, the manufacturer’s documented 32-bit support refers to an integer format under certain driver and software conditions. It doesn’t mean 32-bit float, nor does it prove better noise reduction.
Assess the software-processed result for yourself, and compare technical specifications only within the context they apply to.
Key brands at a glance
Focusrite
The Scarlett 2i2 4th Gen is worth comparing if you want to record stereo line signals and adjust the headphone level separately.
- Focusrite lists two line inputs and a headphone output with its own level control.
- The stated headphone figures apply to specified loads and aren’t an independent sound comparison.
MOTU
The M2 is an option if you’re looking for two inputs and separate level controls for monitor and headphone outputs.
- MOTU lists two mic/line combination sockets and a headphone output with its own volume control.
- Check the stated macOS and Windows requirements against your office computer.
Behringer
The UMC204HD is relevant if you’re recording stereo line signals and want to mix direct input monitoring with computer playback.
- Behringer lists two inputs suitable for line signals, level or clip indicators, and a monitor mix control.
- Direct monitoring plays back the input signal and doesn’t replace checking the software-processed file.
Audient
The iD14 MKII is worth comparing if headphone output specifications and additional monitoring outputs matter to you.
- Audient publishes headphone figures for several loads and details of its USB power requirements.
- These technical specifications don’t prove an independently verified advantage when it comes to detecting background noise.
Steinberg
According to Steinberg, the UR22C offers two mic/line inputs for a stereo recording setup.
- The manual lists two inputs and a separate monitoring setup.
- The documented 32-bit support refers to an integer format used with a compatible driver and software. It isn’t the same as 32-bit float and doesn’t prove better noise reduction.
Audio interfaces at Joybuy
Related products coming soon.
Frequently asked questions
Will an audio interface remove tape hiss?
No. The interfaces covered here provide recording and playback connections; noise reduction is done in software using a noise profile. The Audacity manual warns that a satisfactory result may not be possible if the noise is heavy or varies over time.
How can I tell if noise reduction has removed too much of the wanted signal?
Compare the original and processed file using the same listening setup. The Audacity manual recommends listening to the preview and the removed residual signal to assess any changes to the wanted audio.
What connections do I need for a stereo cassette deck?
If your deck has separate left and right line outputs, you’ll need two line inputs that can be used simultaneously, plus suitable cables. Check the levels and channel assignment during set-up; a headphone output alone can’t record a stereo signal.
What rights do I have when buying an interface from a trader?
If an item is faulty, you have statutory rights against the seller; a voluntary guarantee is separate. According to consumer information from Your Europe, the European Union, goods generally come with a minimum two-year legal guarantee. The specific claim will depend on the purchase and the applicable law.
How should I dispose of an old audio interface in Germany?
Take the device to an authorised collection point. Germany’s Federal Ministry for the Environment states that waste electrical and electronic equipment must be handed in at one of these collection points.