If your recording is already digital, you don’t need to buy a new audio interface just to compare it. What matters is listening to the original and edited files through the same headphone output at a similar volume. If you also want to transfer a cassette, the stereo line input should match your deck’s output. Additional microphone or instrument inputs are useful mainly if you plan to use them. An interface won’t remove tape hiss itself, and the Audacity Manual warns that excessive noise reduction can create audible artefacts.
Who is this selection for?
Anyone comparing the original with the edited version
You already have a digital tape recording and want to check through your headphones whether any sound detail has been lost along with the hiss. The Audacity Manual warns that excessive noise reduction can create audible artefacts.
Anyone digitising cassettes
You want to connect a cassette deck, save a stereo recording and deal with the tape hiss afterwards. The Audacity Manual describes a workflow in which you save the unprocessed recording before applying noise reduction.
Versatile home recordists
You want to record microphone or instrument signals as well as transfer tapes, so you need the right inputs. Focusrite’s user guides describe the line and microphone connections on the 4th Generation Scarlett 2i2.
What should you look for when buying?
First, check whether you only want to listen to a digital file or also transfer a cassette. This determines which connections and monitoring features you’ll need.
| Buying priority |
What to check |
Who is it important to? |
| Listening to the edited version |
Use the same headphone output and a similar volume for the original and edited files. If a deck is connected, distinguish between the direct signal and computer playback. |
If I want to judge whether the edit preserves sound detail, I need a reliable comparison of the same passage. Around 36 % of consumers put listening comparisons first. |
| Transferring a cassette in stereo |
Match the cassette deck’s stereo line output and plugs to the interface inputs; save the unprocessed recording before editing. |
If my deck still has analogue outputs, a suitable stereo signal path is my priority. Around 29 % of consumers prioritise cassette transfer. |
| Keeping extra setup to a minimum |
Check your existing headphones and cables, and work out whether you need a new interface at all. Also consider the power supply and connection type. |
If space is limited on my desk, I want to avoid unnecessary equipment and extra cables. Around 21 % of consumers prioritise keeping additional setup to a minimum. |
| Recording other sources |
Choose only the microphone, instrument and line inputs you actually need; check whether using one connection affects another. |
If I also want to record microphones or instruments later, I need suitable inputs for them, not just a connection for my cassette deck. Around 14 % of consumers prioritise other types of recording. |
Common selection mistakes
-
Assuming bit depth or sample rate guarantees noise reduction
An interface’s conversion specifications don’t tell you whether software can remove noise without audibly changing the wanted signal. The Audacity Manual warns that setting noise reduction too high can create artefacts.
Choose an interface based on the signal path and monitoring options. Then compare the same passage in the unprocessed and edited recordings.
-
Confusing direct input monitoring with edited playback
According to the manufacturer, the MONITOR switch on the Behringer UCA222 toggles between the signal at the RCA input and computer playback. To assess an edited file, your headphones need to play the audio from your computer.
When comparing recordings, check which signal you’re listening to and select computer playback to hear the saved, edited file.
-
Choosing an interface based only on the number of connections
A cassette deck with RCA outputs and separate jack line inputs need different connecting cables. Your headphone plug also needs to match the interface output.
Make a note of your deck’s outputs and your headphone plug before choosing a model with RCA or jack connections.
Depending on the connections you already have, you may need suitable connecting cables or a headphone adaptor.
Key brands to consider
Behringer
The UCA222 is an option for stereo line sources with RCA connections and headphone monitoring. This assessment applies to this model.
- According to Behringer, it’s powered via USB and has stereo RCA inputs, an adjustable headphone level and switchable input or computer monitoring.
- The specified conversion is limited to 16-bit at 32, 44.1 or 48 kHz. No microphone inputs are listed for this model.
Focusrite
The 4th Generation Scarlett 2i2 is a better fit if you’re planning to record microphones or instruments as well as transfer tapes.
- Focusrite lists two line inputs, a 6.35 mm headphone output and 24-bit conversion.
- You’ll need suitable cables to connect a cassette deck with RCA outputs. If a front jack input is in use, the corresponding rear XLR microphone input is disabled.
Steinberg
The UR22C may appeal if you want two inputs as well as a monitor mix and MIDI connections.
- Steinberg lists a monitor mix and MIDI input and output.
- A 2019 Bonedo review praised aspects including the build and direct monitoring, but also criticised the position of the phantom power switch. That review isn’t a current comparison of all models.
Joybuy products
Related products will be available soon.
Frequently asked questions
Does the audio interface remove tape hiss itself?
No. The interfaces described here are for recording and playback; noise reduction is handled by editing software. The Audacity Manual recommends first capturing a section containing only noise and warns that excessive processing can create audible artefacts.
What should I keep before and after transferring a cassette?
Keep an unprocessed recording as a reference and backup. The workflow described in the Audacity Manual recommends saving the original material before optionally reducing tape hiss.
Do I need direct monitoring to listen to edited files?
No. For a file that’s already been edited, you need computer playback. Direct monitoring routes the input signal to the output without sending it through the computer. When comparing recordings, make sure you’re not accidentally listening to the unprocessed input instead of the file.
What should I do if an audio interface I bought in Germany is faulty?
According to Your Europe, when you buy goods from a trader in the EU, you’re entitled to a minimum two-year legal guarantee from the date you receive them. The Verbraucherzentrale distinguishes this statutory guarantee from a voluntary manufacturer’s warranty. The circumstances of your purchase will determine whether you have a specific claim.