Which setup is right for you?

Solo mixer working quietly

If you usually work on headphones at a shared desk and want to switch your speakers on when needed, an easy-to-reach headphone control and the right monitor connections are important. Focusrite and MOTU describe relevant features for the models mentioned.

Team needing separate monitoring paths

If you need to send different signals or mixes to headphones and other outputs during a session, the routing of each output matters. Focusrite, Steinberg and Audient document routing features for specific models.

Moving between workstations

If you take your interface between workstations, check the USB connection, power supply and computer compatibility at each location. MOTU and Focusrite specify requirements for individual models.

What should you look for when buying?

When mixing a theatre soundtrack at a shared desk, the right features depend on whether you prioritise personal monitoring, separate monitoring paths, a portable setup or additional recording.

Priority What to check when buying Who it matters most to
Quiet, controlled monitoring Headphone socket and dedicated level control; connections for your existing monitors. If I’m mixing quietly on my own at a shared desk, I need an adjustable headphone output and the right monitor connections. Consumers whose main priority is personal monitoring account for around 36%.
Different mixes Check the manual to see which DAW or internal mix can be assigned to each physical output. If collaborators need to hear a different cue or control mix at the same time, I need to be able to follow the output routing. Consumers whose main priority is separate monitoring paths account for around 29%.
Moving between workstations Check the operating system and driver requirements for the exact model, as well as the USB connection and available power supply. If I use the interface with different computers, the connection and power supply need to work at each location. Consumers who prioritise an easy switch between workstations account for around 21%.
Additional recording Check the type and number of microphone, line and instrument inputs you need to use simultaneously. If I want to record additional vocal or instrument sources as well as mixing, I need the right inputs. Consumers whose main priority is additional recording account for around 14%.

Which buying misconceptions should you avoid?

  • Assuming two headphone sockets provide two independent mixes

    The number of sockets alone doesn’t tell you whether the outputs receive different signals. The Steinberg UR44C manual specifies that MIX 1 goes to PHONES 1, while PHONES 2 lets you choose between MIX 1 and MIX 2.

    Check the manual to see how the signal is routed to each socket and output before choosing an interface for two different headphone mixes.

  • Assuming bus power will work without checking the specific USB connection

    For the 4th Generation Scarlett 4i4, Focusrite specifies a minimum of 5 V at 1.5 A; an inadequate power supply can affect the audio outputs.

    Check the power supply on the computer you’ll actually be using and, if necessary, keep the supplied power adapter to hand for this model.

  • Using direct monitoring and DAW monitoring for the same source at the same time

    If both monitoring paths play the same input signal, you may hear it twice, with a slight delay. Focusrite recommends turning off software monitoring in your DAW when using direct monitoring.

    When recording, decide which monitoring path to use and turn off the other one for the same source.

Key brands to consider

Focusrite

The 4th Generation Scarlett 4i4 is worth considering if you need to send different mixes to headphones and line outputs.

  • Focusrite describes separate mixes for headphones and line outputs, and specifies additional line inputs and MIDI for this model.
  • Focusrite specifies a minimum of 5 V at 1.5 A; if USB power is insufficient, you may need to use the supplied power adapter.

MOTU

The M4 is an option for a personal headphone setup with additional line outputs.

  • MOTU specifies a separately controlled headphone output, four line outputs and USB bus power.
  • The M4 has one headphone socket. A dedicated volume control doesn’t mean it offers a second, independently assignable headphone mix.

Steinberg

The UR44C is worth considering if you need to set up two different headphone mixes.

  • According to Steinberg, PHONES 1 plays MIX 1, while PHONES 2 can output MIX 1 or MIX 2. Steinberg also specifies four microphone preamps.
  • These extra features won’t be useful if all you need is a simple playback setup for one person.

Audient

The iD14 MKII is an option for a space-saving setup with an assignable headphone output and additional line outputs.

  • Audient specifies two headphone connections, four line outputs and an assignable cue mix.
  • Two headphone sockets don’t automatically mean you can assign a different mix to each one. Audient notes that DAW Thru can bypass the volume control for the relevant output.

Audio interfaces at Joybuy

Related products coming soon.

Frequently asked questions

Do I automatically need two sockets for two pairs of headphones?

No: two sockets simply give you two connections, not two independently assignable mixes. According to the Steinberg manual, PHONES 1 on the UR44C plays MIX 1, while PHONES 2 lets you choose between MIX 1 and MIX 2. Check the routing documentation for other models.

Why can I hear an echo when recording?

An echo can occur when direct monitoring and DAW input monitoring play the same signal at the same time. In this situation, Focusrite recommends turning off software monitoring in your DAW while using direct monitoring.

Can I rely on USB bus power with any interface?

No, the power supply depends on the model and connection. MOTU specifies that the M4 is USB bus-powered; Focusrite specifies a minimum of 5 V at 1.5 A for the 4th Generation Scarlett 4i4. Check the requirements for the exact model on the computer you plan to use.

Can I put an old audio interface in my household rubbish?

No. The German Environment Agency advises that old electrical equipment must be disposed of separately and must not go in general or packaging waste.