To match finished recordings, you need loudness metering and, if necessary, normalisation in your editing software; the level meters on an audio interface won’t do this for you. The Audacity manual describes LUFS-based loudness normalisation. Choose an interface based on the inputs and monitoring paths you need: two computer monitors alone don’t require extra audio channels.
Who is this selection relevant to?
Editors working with existing recordings
If you’re comparing finished files across two computer monitors and want to match their perceived loudness, metering and editing software matter more than extra recording inputs. The Audacity manual describes LUFS-based loudness normalisation.
Recording with changing levels
If you’re recording new speech or music takes, level meters or setup aids can help you set the input level before comparing finished files. MOTU, Focusrite, Audient and PreSonus describe relevant features on certain models.
Using multiple monitoring paths
If you genuinely need separate headphone or speaker paths as well as two computer monitors, check the connections, controls and routing on the specific model. Focusrite lists four line outputs for the fourth-generation Scarlett 4i4; RME describes independent routing on the Babyface Pro FS.
What should you consider when buying?
First, work out whether you’re editing finished files or setting levels for new takes. Only count extra audio monitoring paths if you want to use them independently.
| Criterion |
What to look for |
Who is this most important to? |
| Loudness of finished recordings |
Check whether your software can measure loudness in LUFS and normalise files if needed. |
If I want to compare finished files by perceived loudness, I need a software workflow for this; consumers who prioritise this kind of matching first account for around 36%. |
| Input levels for new takes |
Check the level meter and gain controls on the specific model, as well as any Auto Gain, Clip Safe or Smartgain features. |
If I often record new speech or music takes, I want to set the input level reliably in advance; consumers with this priority account for around 29%. |
| Monitoring controls |
Check the headphone socket, monitor outputs and accessible volume controls; select the output device you want to use on your computer. |
If I switch between headphones and monitors, I want to be able to set the intended monitoring path easily; consumers who prioritise these controls account for around 21%. |
| Independent audio paths |
Count the separate signal paths you need and check how they’re assigned; mirrored sockets aren’t independent outputs. |
If I need separate pairs of speakers or monitoring mixes, the interface must actually provide the right paths; consumers with this as their main requirement account for around 14%. |
The EBU recommends −23 LUFS for broadcasting applications. This isn’t a universal target for every release; set your target according to the intended use or delivery format.
Common buying mistakes
-
Confusing level meters with a loudness meter for complete files
A display showing current input or output levels doesn’t, on its own, tell you whether two finished recordings have the same programme loudness.
Plan to measure LUFS and, if necessary, normalise files in your editing software. Use the interface’s meter to set levels for new signals.
For finished files, you may need to allow extra time for software analysis and post-production.
-
Assuming two monitors mean two independent audio outputs
Computer monitors and audio outputs serve different purposes. According to MOTU, the RCA outputs on the M2 mirror the main outputs, so they don’t provide an additional independent stereo path.
Map out your video connections, speakers and headphones separately. Check the manual to see whether each audio path you need can actually be assigned independently.
-
Buying Auto Gain to automatically process old recordings
The features described by Focusrite and Audient help you set input levels for new recordings; they don’t automatically match the loudness of finished files.
If you mainly work with existing files, decide on your software workflow first. Only consider Auto Gain or Smartgain if you’re recording new takes.
Relevant brands to consider
The models below show different approaches to level metering, input levels and routing. Always check the features of the specific model variant.
MOTU
The M2 is worth considering if you want to see input and output levels directly on the device; the M4 is an option if you need extra analogue inputs and outputs.
- MOTU lists a colour LCD and separate monitor and headphone controls for the M2.
- According to MOTU, the M2’s RCA outputs mirror its main outputs. Its level meters don’t replace LUFS analysis of finished files.
Focusrite
The fourth-generation Scarlett 2i2 is aimed at people looking for help setting levels on new takes; the fourth-generation Scarlett 4i4 is relevant if you need extra line outputs.
- Focusrite documents Auto Gain and Clip Safe for the fourth-generation Scarlett 2i2, and four line outputs for the fourth-generation Scarlett 4i4.
- These details apply to the models listed and don’t mean that every Scarlett variant has the same features or monitoring paths.
Audient
The EVO 4 is a compact option if setting input levels for new recordings is your main priority.
- Audient describes Smartgain for the EVO 4 and lists two recording inputs.
- This feature helps with input levels; it doesn’t automatically match the loudness of finished recordings.
PreSonus
The Studio 24c is worth considering for recording if you want LED level meters and a control for mixing the direct signal with computer playback.
- PreSonus lists four LED level meters for the inputs and main outputs, as well as a mix control.
- Whether this control layout suits your recording workflow better than an LCD or an automatic setup aid depends on your needs.
RME
The Babyface Pro FS is worth considering for flexible routing; the Fireface UCX II offers extensive routing and monitoring options.
- RME describes independent routing and mixing to the physical outputs on the Babyface Pro FS, along with extensive routing on the Fireface UCX II.
- If you’re only comparing existing files through a single stereo path, consider whether you really need these extra routing options.
Suitable products on Joybuy
Suitable products coming soon.
Frequently asked questions
Can I use two computer monitors to automatically match the loudness of recordings?
No. Monitors provide screen space; to match finished files, you need loudness metering and, if necessary, normalisation in your software. The Audacity manual describes LUFS-based loudness normalisation.
Does every recording need to be brought up to −23 LUFS?
No. −23 LUFS is an EBU recommendation for the applications covered by its R 128 standard, not a universal target determined by your choice of interface. Choose a target based on the intended use or delivery format.
What can I check if there’s no sound through the interface?
First, check which output device is selected on your computer and whether the sound is muted. Microsoft lists an incorrectly selected output device as a possible cause in Windows; the exact setup depends on your operating system and interface.
What should I know about a faulty product bought online in Germany?
If a product is faulty, statutory consumer rights against the seller are separate from a voluntary guarantee. The Verbraucherzentrale explains the difference; which rights apply in your particular case depends on the relevant conditions.